US $129.99
| Condition | Used
:
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
|
| Seller Notes | “USED GOOD CONDITION SEE PHOTO"S” |
Directions
Similar products from Tools for Lathe Machines
South Bend lathe 9A 10k gearbox Change Handle Shaft
Monarch 10 ee Lathe 12 1/2" Swing 20" Centers
RB-PMIL Tool Holder 5/8" x 7/8" Shank
Bison / Set-Tru 0263 99 6" 6 Jaw Chuck with D1-4 Backplate
Hardinge Indicator Stop with Federal D5M Indicator Gauge "Reduced to Sell"
ATLAS LATHE SOUTHBEND CORED 1.5INCH COLD ROLLED STEEL
12" Atlas Craftsman Lathe Steady Rest 384-003 / 050-029
EXCELLENT ATLAS CRAFTSMAN 10"/12"? LATHE COMPOUND REST Part # 10-502
KENNAMETAL LATHE TOOL HOLDER NELL-243D NP-33 STK 1974
ORIGINAL ATLAS CRAFTSMAN 10 12 METAL LATHE HEADSTOCK BACK GEAR ASSEMBLY 10-250X
HARDINGE 4" EXTRA DEEP STEP CHUCK COLLET CLOSER & 5C COLLET W/ TAPER LOCK
14" x 40" WILLIS Model 1440E Engine Lathe
Logan lathe 10" model lead screw support
15-1/2", Lathe,Faceplate, D1-6, Cam-Lock
KENNAMETAL B-4414W CARBIDE INSERT BORING BAR 1 3/4" x 13 1/2" lathe tool TPG 322
CARBOLOY BB1-2105P CARBIDE INSERT BORING BAR 2 1/2" x 16" lathe tool
JET 1440 3PGH LATHE TOOLING. STEADY REST & FOLLOWREST 4 JAW CHUCK ADAPTER PLATE
Miyano BNC-34 Cnc Lathe With Bar Feed Loads Of Collets And Tooling
Knob for a 8mm Watchmaker's or Jeweler's Lathe Drawbar
People who viewed this item also vieved
GEOMETRIC 7/16"-20 MILLED CHASERS FOR 1" D, DS,DSA, GROUND FROM SHARPENING
GEOMETRIC 7/16"-14 MILLED CHASERS FOR 3/4" D, DS,DSA, GROUND FROM SHARPENING
GEOMETRIC 7/16"-28 MILLED CHASERS FOR 3/4" D, DS,DSA, GROUND FROM SHARPENING
18.3MM COOLANT THRU CARBIDE TIP GUN DRILL 383.5MM OAL 32.5" LOC (LOC1206) TS12
7MM COOLANT THRU CARBIDE TIPPED GUN DRILL 1/2" SHANK 320MM OAL (LOC1201A) TS12
INDEX TENSION TAP HOLDER W34510.00
SODICK EDM FLUSH CUPS OEM#3081606 UP. 10MM ID .623" THD
MITSUBISHI EDM FLUSH CUPS OEM # M728 UPPER/4MM/DWC90H1
MITSUBISHI EDM FLUSH CUP OEM#S416LOWER DWC90H1/C110 8MM
NIAGARA No. 180 Power 14 Ga. Capacity 12" Throat Tooling (27184)
ADIRA CNC HYDRAULIC PRESS BRAKE (27330)
Midwest 80 ton SINGLE END HYDRAULIC PUNCH No. 150-p 12" Throut (22674)
1pc MB2000 Aluminum Green Uni-Burr w/Pocket Clip with E100 Blade Shaviv #29159
1pc MB2000 Aluminum Red Uni-Burr w/Pocket Clip with E100 Blade Shaviv #29160
1pc UB2000 Aluminum Red Uni-Burr w/Pocket Clip with B10 Blade Shaviv #29191
Ewag AG-RS2 TOOL & CUTTER GRINDER
10.6" Swg 7.9" Strk Okamoto 1GM-ENC CNC ID GRINDER, FANUC 11TA CNC, FULL ENCLOSU
Bridgeport No.2. &. #63 Boring Head With 23 Pcs. Boring Bars
Face Mill Carbide Inserts In Amazing Shape for Milling Machine Shop Tools
FEEDING SYSTEM FOR HEADED BLANKS
FELLOWS #3 SPIRAL GUIDES (3 SETS - A,B,C) - INV #4835
Cosen Model SH-460M, Horizontal Band Saw, Used
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies