+ Post new Ad
Hardinge feed-finger spanner wrenches, US $550 – Picture 0
Hardinge feed-finger spanner wrenches, US $550 – Picture 0

Hardinge Feed-finger Spanner Wrenches

US $550

  • Bentonville, Arkansas, United States
  • Jan 30th
Open on mobile:
QR code
 This is for seven spanner wrenches, to fit Hardinge-style feed fingers. (will also fit CVA English, and related) There are seven wrenches as follows: 1-DA2X, B3X, for changing pads and adjusting tension (double ended), 1-style B6 feed finger 7/8 capacity, 1-style B4 feed finger 5/8 capacity1- style B10 feed finger 3/8 capacity, and 3-style B2feed finger 7/16 capacity.   These wrenches are older, but unused. I used them on Brown & Sharpe )00 screw machines, and CVA English 00 screw machines, but came into a bunch, so I never needed to use these ones. Have been stored in my shop since I retired fifteen years ago from machine shop. All in perfect condition, no rust, and ready to start work! priced right!  Thanks for looking, and enjoy!
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Country/Region of Manufacture United States
Brand Hardinge

Directions

Similar products from Screw Machines Equipment

Reed B-10 Thread Rolling Attachment B10 for Screw Machine

Reed B-10 Thread Rolling Attachment B10 for Screw Machine

  • Millstone Township, New Jersey, United States
  • Jan 30th
FETTE THREAD ROLLS M9 X 1.25

FETTE THREAD ROLLS M9 X 1.25

  • Colorado Springs, Colorado, United States
  • Jan 30th
Vintage Geometric Co Collapsible Tap 1"

Vintage Geometric Co Collapsible Tap 1"

  • Dayton, Ohio, United States
  • Jan 30th
Lot of 2 BOYAR SCHULTZ BURNISHING TOOL ROLLER BLOCK ASSEMBLYS

Lot of 2 BOYAR SCHULTZ BURNISHING TOOL ROLLER BLOCK ASSEMBLYS

  • Chelmsford, Massachusetts, United States
  • Jan 30th
Brown & Sharpe 185-322 knurl knurling tool, screw machine, turret lathe

Brown & Sharpe 185-322 knurl knurling tool, screw machine, turret lathe

  • Duncansville, Pennsylvania, United States
  • Jan 30th
1-Set of LDI 1/2-28 Chasers

1-Set of LDI 1/2-28 Chasers

  • Santa Maria, California, United States
  • Jan 30th
Assembly Automation SA-1M Automatic Screwdriver w/ Cleco 5RSA-10B & PBA-18-AH

Assembly Automation SA-1M Automatic Screwdriver w/ Cleco 5RSA-10B & PBA-18-AH

  • Milpitas, California, United States
  • Jan 30th
SCREW MACHINE STOP 1.24" ID X 7-1/2" LONG #9859

SCREW MACHINE STOP 1.24" ID X 7-1/2" LONG #9859

  • Cohutta, Georgia, United States
  • Jan 30th
DAVENPORT P/N #2744-1-SA TOOL POST FOR STRAIGHT TOOLS-REAR

DAVENPORT P/N #2744-1-SA TOOL POST FOR STRAIGHT TOOLS-REAR

  • Churchville, New York, United States
  • Jan 30th
DAVENPORT P/N # 2738-1-SA TOOL POST FOR STRAIGHT TOOLS-FRONT

DAVENPORT P/N # 2738-1-SA TOOL POST FOR STRAIGHT TOOLS-FRONT

  • Churchville, New York, United States
  • Jan 30th
Somma Tool CO. SKH2B SKH2-B Tool Holder Skive

Somma Tool CO. SKH2B SKH2-B Tool Holder Skive

  • Seattle, Washington, United States
  • Jan 30th
Lipe Bar Feeds - 156 AML, 100 AML, (2X) 56 AML, Model 87, etc

Lipe Bar Feeds - 156 AML, 100 AML, (2X) 56 AML, Model 87, etc

  • Racine, Wisconsin, United States
  • Jan 30th
ACME National STOCK FEED SLIDE 1 5/8 RBN 8

ACME National STOCK FEED SLIDE 1 5/8 RBN 8

  • Warren, Michigan, United States
  • Jan 30th
Nomura Screw Machine

Nomura Screw Machine

  • Tulsa, Oklahoma, United States
  • Jan 30th
4=HARDINGE 22 {1"-15/16"-1/2"-1/4"} ROUND FEED FINGERS

4=HARDINGE 22 {1"-15/16"-1/2"-1/4"} ROUND FEED FINGERS

  • Des Moines, Iowa, United States
  • Jan 30th
HARDINGE 21A 5/8" HEXED FEED FINGER

HARDINGE 21A 5/8" HEXED FEED FINGER

  • Des Moines, Iowa, United States
  • Jan 30th
Acme/Screw Machine Wrenches,Dill Bushings, Hand Oiler,Calipers

Acme/Screw Machine Wrenches,Dill Bushings, Hand Oiler,Calipers

  • Mansfield, Ohio, United States
  • Jan 30th
9/16" GEOMETRIC DIE HEAD W/ 3/4" SHANK

9/16" GEOMETRIC DIE HEAD W/ 3/4" SHANK

  • Clackamas, Oregon, United States
  • Jan 30th
5/16" GEOMETRIC DIE HEAD W/ 5/8" SHANK

5/16" GEOMETRIC DIE HEAD W/ 5/8" SHANK

  • Clackamas, Oregon, United States
  • Jan 30th
Master Collet 1" National Acme Gridley Screw Machine Automatic Barak

Master Collet 1" National Acme Gridley Screw Machine Automatic Barak

  • Ballwin, Missouri, United States
  • Jan 30th

People who viewed this item also vieved

3 Sets Of Ceramtech Inc Cr-002-0054 EDM Wire Guide Bottoms

3 Sets Of Ceramtech Inc Cr-002-0054 EDM Wire Guide Bottoms

  • Peoria, Illinois, United States
  • Jun 3rd
Global EBM 0.30mm Gamma Coated EDM Wire 900NT

Global EBM 0.30mm Gamma Coated EDM Wire 900NT

  • Venice, Florida, United States
  • Jun 3rd
Wire EDM 8 inch Rails

Wire EDM 8 inch Rails

  • Rochester, New York, United States
  • Jun 3rd
OLDER ARMSTRONG NO. 2050 METAL LATHE THREADING TOOL THREADER MACHINIST TOOLING

OLDER ARMSTRONG NO. 2050 METAL LATHE THREADING TOOL THREADER MACHINIST TOOLING

  • Waterford, Michigan, United States
  • Jun 5th
ERICKSON NMTB 30 TG75 COLLET CHUCK STK 7239

ERICKSON NMTB 30 TG75 COLLET CHUCK STK 7239

  • Wadley, Alabama, United States
  • Jun 5th
Tri-Tech Fadal M 5412 5 Axis Spindle Head Milling CNC Cutting Head Rotary Tilt

Tri-Tech Fadal M 5412 5 Axis Spindle Head Milling CNC Cutting Head Rotary Tilt

  • Lompoc, California, United States
  • Jun 5th
ERICKSON NMTB 30 TG75 COLLET CHUCK STK 7237

ERICKSON NMTB 30 TG75 COLLET CHUCK STK 7237

  • Wadley, Alabama, United States
  • Jun 5th
Fancort Industrial Pneumatic Tool and Die Press SMT

Fancort Industrial Pneumatic Tool and Die Press SMT

  • Valencia, California, United States
  • Jun 6th
McGill CYR1 3/4 S Cam Yoke Roller Sealed Steel 1-3/4" Inch Diameter New CYR-1

McGill CYR1 3/4 S Cam Yoke Roller Sealed Steel 1-3/4" Inch Diameter New CYR-1

  • Grand Rapids, Michigan, United States
  • Jun 6th
#4 Drill Rod Blank USA 3-7/8" Long Ace Drill Corp .209" Number 4 New NOS 1pc.

#4 Drill Rod Blank USA 3-7/8" Long Ace Drill Corp .209" Number 4 New NOS 1pc.

  • Grand Rapids, Michigan, United States
  • Jun 6th
Metco Metal Lathe Tool Wheel Craftsman/ Logan Atlas

Metco Metal Lathe Tool Wheel Craftsman/ Logan Atlas

  • Kingsburg, California, United States
  • Jun 6th
Dunlap 111703 3" 4 Jaw Chuck Metal Lathe Craftsman/ Logan Atlas

Dunlap 111703 3" 4 Jaw Chuck Metal Lathe Craftsman/ Logan Atlas

  • Kingsburg, California, United States
  • Jun 6th
1/4-20 Standard Helicoil Stainless Screw Lock Inserts, Lot of 50+ New

1/4-20 Standard Helicoil Stainless Screw Lock Inserts, Lot of 50+ New

  • Farmington, Missouri, United States
  • Jun 8th
TAPMATIC 30 TC/DC 0-1/4" REVERSIBLE TAPPING HEAD 1/2" SHANK ***VGC***

TAPMATIC 30 TC/DC 0-1/4" REVERSIBLE TAPPING HEAD 1/2" SHANK ***VGC***

  • Highland, New York, United States
  • Jun 8th
TELCO 0-1/2" REVERSING TAPPING HEAD

TELCO 0-1/2" REVERSING TAPPING HEAD

  • Highland, New York, United States
  • Jun 8th
Mitsui Surface Grinder MSG-200MH [TKP8324]

Mitsui Surface Grinder MSG-200MH [TKP8324]

  • Cleveland, Ohio, United States
  • Jun 8th
DUMORE #11 Speedee Tool Post Grinder W/ Case & and Attachments

DUMORE #11 Speedee Tool Post Grinder W/ Case & and Attachments

  • Carmi, Illinois, United States
  • Jun 8th
Engis Diamond Wheel Dressing Taper Pin GLT125/12

Engis Diamond Wheel Dressing Taper Pin GLT125/12

  • Arlington, Texas, United States
  • Jun 8th
Whitney Jensen Model 150 Deep Throat Power Punch Press 10 Ton

Whitney Jensen Model 150 Deep Throat Power Punch Press 10 Ton

  • Archbold, Ohio, United States
  • Jun 9th
DIY/Fabricators press brake Kit (for 10-40 ton press)

DIY/Fabricators press brake Kit (for 10-40 ton press)

  • Ozark, Missouri, United States
  • Jun 9th
Doall 20" Model 2012-2H Vertical Bandsaw Band Saw HVAC sheet metal machine

Doall 20" Model 2012-2H Vertical Bandsaw Band Saw HVAC sheet metal machine

  • Fayetteville, Tennessee, United States
  • Jun 9th
HE&M VT130HA-60 Vertical Band Saw with Material Handling System

HE&M VT130HA-60 Vertical Band Saw with Material Handling System

  • Benson, Minnesota, United States
  • Jun 9th
Hyd-Mech S-25A Fully Automatic Mitre Cutting Horizontal Band Saw

Hyd-Mech S-25A Fully Automatic Mitre Cutting Horizontal Band Saw

  • Oklahoma City, Oklahoma, United States
  • Jun 9th
COMPLETE TRANSFER PUNCH SET 3/32" - 17/32"

COMPLETE TRANSFER PUNCH SET 3/32" - 17/32"

  • Ellington, New York, United States
  • Jun 9th
BATES HONE STONE L3NM855 BORAZON

BATES HONE STONE L3NM855 BORAZON

  • Venice, Florida, United States
  • Jun 9th
NICE! BENCH TOP MANUAL STRETCHER / CRIMPER FIXTURE

NICE! BENCH TOP MANUAL STRETCHER / CRIMPER FIXTURE

  • La Puente, California, United States
  • Jun 9th
1lb Rust Cutting Resin Abrasive Tumbler Media For Rotary Tumbler/ Vibrators 1/4"

1lb Rust Cutting Resin Abrasive Tumbler Media For Rotary Tumbler/ Vibrators 1/4"

  • Auburn, Illinois, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies