HANKISON DH-115 Desiccant Dryer 115 CFM, US $2,000.00 – Picture 0

HANKISON DH-115 Desiccant Dryer 115 CFM, US $2,000.00 – Picture 1

HANKISON DH-115 Desiccant Dryer 115 CFM, US $2,000.00 – Picture 2

HANKISON DH-115 Desiccant Dryer 115 CFM, US $2,000.00 – Picture 3

HANKISON DH-115 Desiccant Dryer 115 CFM, US $2,000.00 – Picture 4

HANKISON DH-115 Desiccant Dryer 115 CFM, US $2,000.00 – Picture 5

HANKISON DH-115 Desiccant Dryer 115 CFM, US $2,000.00 – Picture 6

Hankison Dh-115 Desiccant Dryer 115 Cfm

US $2,000.00

Chatsworth, California, United States
Jan 30th

Open on mobile:
QR code

template Hankison DH-115 Desiccant Dryer ITEM SOLD AS PICTURED Hankison DH Series dryers produce consistent outlet pressure dew points...with minimum purge air usage...and maximum service life. A regenerative desiccant dryer consists of two (dual) towers filled with desiccant. The desiccant (e.g. activated alumina) attracts (adsorbs) water vapor onto its surface. Unlike deliquescent chemicals, which are used up in the process of drying, desiccants can be regenerated and reused. The two towers are switched on and off-stream, alternating between and regeneration so that dry desiccant is continuously exposed to the air stream. In pressure-swing (heatless) dryers, desiccant is regenerated by expanding a portion of the dried air (called purge air) to atmospheric pressure and passing it over the off-stream bed. This "swing in pressure" causes the expanded air to become very dry. The dry purge air pulls (desorbs) moisture from the desiccant and carries it out of the dryer. FEATURES Provides pressure dew points of -40°F, -100°F, and lower Eliminates water from systems exposed to sub-freezing temperatures Reduce moisture content in critical applications, outlet concentrations of 1 ppb @ 100 psig Optimally sized dual towers Easy operation INCLUDES Text SPECIFICATIONS Inlet Flow @ 100 psig 115 scfm Min. / Max. Working Pressure 60 / 150 psig Max. Operating Temperature 120°F Dimensions 32" x 30" Height 87" Weight 563 Lb. Inlet / Outlet Connections 1" threaded Power Requirement 110 / 120 Volt, 3 Phase *Specifications subject to verification INSPECTION NOTES: As with any piece of equipment, new or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item's cosmetic condition. This item is sold as pictured. Shipping Shipping is the responsibility of the buyer; however, Machinery Exchange has a large network of freight carriers to help you find the best price. If you would like a freight quote for this item please click "Contact Seller" or “Ask Question” at the bottom of the listing and provide us with your city, state and zip code. Or contact us via telephone at (818) 718-6734 Machines are attached to a skid for and covered in protective cosmoline coating for shipment. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Tooling: Below are directions on how you can calculate shipping for items under 150lbs. That does not qualify for USPS Flat Rate. Pick up/Will Call: All our items are available for pick up Monday thru Friday from 9am to 4:30. Arrangements can be made for Saturday pick up. We do not charge loading fees for loading machines or tooling unless we have to bring in special equipment or call a mover. Note: Most of our listings are marked Freight shipping. We ship via FEDEX and USPS for item(s) 150lbs or lighter. The cost of shipping will be sent via invoice. We encourage all customers to log into the FedEx website to calculate shipping. Listed on every item are the directions and information needed to do so. ENCLOSED FREIGHT- Items over 100 lbs. less than 1000 lbs. will be sent via LTL Freight via enclosed truck. For an enclosed freight quote please email us with: item #, name, zip code, and destination type [commercial or residential]. We forward your emails to a freight broker who networks with all the major freight companies to find you the best rate. We can act on your behalf for shipping quotation but shipping arrangement and charges are your responsibility. We will send you the freight broker's contact info to schedule pick up. Enclosed shipments require an item to be palletized and protected. The cost labor and materials to prepare an item for enclosed shipment is generally $50. This charge will be passed on to you as a packaging fee. We will load the item at no additional charge. In some cases, we will send an item under 1000 lbs. via open-bed freight if we feel enclosed shipment is not a suitable means of shipment. MACHINE DIMENSIONS: Need to check height limits of truck or other palletizing options. MACHINE WEIGHT: ? lbs. approximate. RIGGING: $200 OPEN-BED FREIGHT- Items over 1000 lbs. less than 3000 lbs. will be sent via open-bed freight. Open-bed freight trucks allow the item to secured to the truck bed. For an open-bed freight quote please email us with: item #, name, zip code, and destination type [commercial or residential]. We forward your emails to a freight broker who networks with all the major freight companies to find you the best rate. We can act on your behalf for shipping quotation but shipping arrangement and charges are your responsibility. We will send you the freight broker's contact info to schedule pick up. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item's electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items are with-in our forklifts capacity and we will load them on to an open-bed freight truck at no charge. We may charge a rigging fee if we do not feel comfortable loading the item and contract machinery movers to load for us. This is usually the case with top-heavy items, such as grinding machines. MACHINE DIMENSIONS: 32" x 30" x 87"H (inches) approximate. MACHINE WEIGHT: 563 lbs. approximate. RIGGING: $200 Payment We accept Check, Credit Card, or PayPal. We accept all major credit cards except American Express. Payment is due within 5 days of purchase. Orders are not processed until they’re paid in full. Our invoice will include a subtotal of item(s) purchased, sales tax for in-state purchases [CA], and a rigging/packaging charge if applicable. Please wait for a complete invoice with estimated shipping price before sending payment. Machinery Exchange reserves the right to open an Unpaid Dispute against buyers who do not pay or contact us in regards to payment. Machinery Exchange reserves the right to re-list or re-sell a purchased item if we do not receive payment. Terms Listed Items- Items listed on eBay are available for immediate purchase through our showroom as they are advertised through various trade publications. This item is subject to prior sale. We reserve the right to end an auction early if the item sells through another outlet. We will not end an auction if it has less than eight hours remaining or the item reserve has been met. Machinery Turn-around Time - Your order is processed after it is paid for in full. Average turn-around time varies depending on the item you have purchased. Many factors come in to play when purchasing industrial equipment. Machines must be 'blocked' for shipment before they can be removed from our showroom and loaded on to a freight truck. We hire an outside technician to prepare the machine for shipment. Machinery movers may also be contracted to remove the machine from our showroom and load it on to a freight truck. Our turn-around time depends on the schedules of these outside sources. Generally an item can be ready to ship within five business days of purchase. Please contact us if you need detailed information on this items availability. We will do our best to expedite an order if you make the request prior to purchase. Refunds & Returns- Only on select machines do we offer a thirty-day warranty, based on seller's discretion. If you are not satisfied with your purchase, please contact a sales representative. Any discounts on machinery voids warranty stated above. Option to repair at dealer's discretion. Machinery Exchange is not responsible for third party charges, such as: rigging, shipping, installation, and service work. All third-party charges are not refundable. *RETURN PRIVILEGE DOES NOT APPLY TO CONSIGNMENT OR DISCOUNTED ITEMS. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. Always insure your shipment when making shipping arrangements. This allows you to make a claim against the shipping company for the amount of loss. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. Ultimately shipping is a contract between you and another company. Machinery Exchange is cannot be held responsible for freight costs, transit times, etc. Feedback - eBay has advised sellers to use the feedback system as a tool to know customers are completely satisfied with their purchase. The final step of the transaction is leaving you positive feedback. Machinery Exchange goes to great lengths to make sure our customers are satisfied. If you feel we have earned anything less than a positive remark please contact us and we will resolve your issue as best we can. You are buying from a MDNA professional. We specialize in reliability, quality, and we back our equipment with a thirty day return privilege to assure your satisfaction. So, Bid With Confidence! Contact Info- Feel free to contact us for more information regarding any of our eBay listings. You can contact us directly by phone or email. Call us Monday through Friday 9am-5pm PST (818) 718-6734 Our address is 20933 Plummer Street Chatsworth, CA 91311 NEED FINANCING? GET APPROVED INSTANTLY ONLINE! Direct Capital provides equipment financing for our customers across the U.S. for both new and used equipment. Click the Direct Capital logo on the left to be redirected to the Equipment Financing Center. Jason Adler and Casey Goodell are our dedicated Finance Managers. Speak to them directly to find the program that best fits your business. Jason Adler (603) 433-9446 jadler@directcapital.com Casey Goodell (603) 766-9365 cgoodell@directcapital.com

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Hankison
Model	DH-115