hammer rivets for sale, brand-new and used.

RIVETER'S TOOL SET W' I.R. HAMMER, BUCKING HEADS, STEEL RIVETS This is a riveter's tool set. Inludes an Ingersoll Rand Air Hammer (can't find model) Part of a coffee can of steel rivets One lot of Bucking heads 1", 1-1/2", 1-3/4" x 3, 2", 2-14", 2-12" Comes As Shown.

This is a new, unused bag of 1,000 plastic anchor rivets from Micro Plastics Inc., with a mushroom style head. They measure .25 inches by 1.5 inches and are a very pale gray in color. (The rivet section is 1 1/2 inches, that is how deep the hole it is being put into has to be.

This is a new, unused bag of 100 plastic anchor rivets from Micro Plastics Inc., with a mushroom style head. Part number is 61APM25150. They are a very pale gray in color and measure .25 inches by 1.5 inches (the rivet section is 1 1/2 inches, that is how deep the hole it is being put into has to be.

This listing is for a pack of 10 knock in Taptite domed rivets. Ideal for fastening number, name , serial number plates etc.into predrilled holes in castings etc. The older method of carrying out this type of fastening.

ATTENTION: You are getting a medium flat rate postal box full of rivets - if the count is only 1 or 2 thousand, then that is how many you get - if the box is full of smaller rivets then you may get 10,000 since the smaller rivets take up less space - however, I am not separating these by sizes or shape. I am filling a box up full with whatever gets dumped into the box as I get to them. If you do not get as many as you thought you was going to get then I am sorry.

You are buying a 17 1/2 pound box of aluminum hammer rivets - there is 1000s of rivets in this box. Medium flat rate box full of different sizes.

Atlas Copco RRH-06P Recoiless Rivet Gun Air Hammer This riveting gun is in excellent working condition. There are some engraved markings on the riveting gun such as initials and the cross.

Vagabond Traveler…Bags For The L ♪

Untitled Document

This is the Flexco Alligator Heavy Duty Plate Fastener for 14" and smaller belts WILL REPAIR BELTS 4" TO 14" ARJ14 Similar to the JD Heavy Plate Fastener, using one large rivet instead of 2 small rivets Uses the straight JD pin Use the portable Flexco Alligator Splice Tool ART14 in my store to install (no vice needed) (Much more economical than the JD tool) Pull the belt part-way out o

This is the Flexco Alligator Heavy Duty Plate Fastener Tool for belts up to 14" REPAIR BELTS FROM 4" TO 14" WIDE This is the working man's tool Does not need a vice to operate Can be used on the ground or bench Pull the belt part-way out of the baler and repair on the ground or tailgate of your pickup Similar to the JD Plate Fastener (Uses same pin) Last much longer than the old Clipper Lace or hog ring type

This is the Flexco Alligator Heavy Duty Plate Fastener for 7" and smaller belts WILL REPAIR BELTS 4" TO 7" ARJ7/175 Similar to the JD Heavy Plate Fastener, using one large rivet instead of 2 small rivets Uses the straight JD pin Use the portable Flexco Alligator Splice Tool ART7 in my store to install (no vice needed) (Much more economical than the JD tool) Pull the belt part-way out o

This is the Flexco Alligator Heavy Duty Plate Fastener Tool for 7" and smaller belts REPAIR BELTS FROM 4" TO 7" WIDE This is the working man's tool Does not need a vice to operate Can be used on the ground or bench Pull the belt part-way out of the baler and repair on the ground or tailgate of your pickup Similar to the JD Plate Fastener (Uses same pin) Last much longer than the old Clipper Lace or hog ring type

Like new the Taylor T-2X air riveting hammer has an extra sensitive teasing throttle and lightweight aluminum handle.Hardened tool steel pistons and steel alloy cylinders guarantee long life for the Taylor T2X rivet hammer.Taylor pneumatic riveting hammers are constructed with spool valves to assure slow heavy blows needed to drive rivets.

CK HAMMER Designed for professionals CK Ball-pein hammer T4208H 08 8 ounce / 1/2 lb. (227 gr.) Drop forged high carbon steel head Hardened & tempered for s

Rebuilt CP 6A rivet hammer offers slow hard hitting blows to easily form rivets up to 1/4" or larger, and its small diameter barrel will get into tight places. Overall tool length is 15". Uses .498 in.

Fo