+ Post new Ad
FOSDICK HYDRAULIC 17" COLOMN 6' ARM RADIAL DRILL WITH TILTING BOX TABLE VIDEO, US $1900 – Picture 0
FOSDICK HYDRAULIC 17" COLOMN 6' ARM RADIAL DRILL WITH TILTING BOX TABLE VIDEO, US $1900 – Picture 0

Fosdick Hydraulic 17" Colomn 6' Arm Radial Drill With Tilting Box Table Video

US $1900

  • Seekonk, Massachusetts, United States
  • Jun 3rd
Open on mobile:
QR code
PERFECT RUNNING CONDITION. I WILL MAKE A VIDEO OF IT AS SOON AS I BUY ANOTHER TRANSFORMER TO RUN IT. I COOKED MINE YESTERDAY. I HAD IT RUNNING HERE FOR 1 1/2 HOURS AFTER TOPPING OFF ALL THE FLUIDS THAT WERE DRAINED BEFORE IS WAS PUT INTO STORAGE 5 YEARS AGO. THIS DRILL CAME OUT OF A BIG TOOL AND MOLD SHOP IN OHIO AND THEY JUST DIDN'T USE IT AFTER THE JOB THEY HAD FOR UNCLE SAM WAS COMPLETED. I ACTUALLY TALKED TO THE GUY WHO USED TO RUN IT THERE AND HE TOLD ME IT WAS FLAWLESS OPERATING CONDITION. I PUT THRU ALL THE SPINDLE SPEEDS AND FEEDS YESTERDAY ALONG WITH THE HEAD POWERED LEFT AND RIGHT AND IT WAS PERFECT. I WAS GOING TO START TO PLAY WITH THE POWER ELEVATION ON THE ARM AND MY TRANSFORMER COOKED IT WAS TO SMALL TO HANDLE THE LOAD. THE DRILL IS A FOSDICK--SERIAL # 18086--YEAR BUILT 1954--SPINDLE IS A # 6 MORSE TAPER WITH 22" OF TRAVEL--SPINDLE SPEEDS FROM 14-1450 RPM--THERE ARE 13 DIFFERENT FEED RATES--20 HP MAIN MOTOR 220-440 WIRED 440 3 PH--HAS A BEAUTIFUL 24" X 30" TILTING BOX TABLE--COOLANT SYSTEM. WEIGHTS IN AT 28,000 POUNDS. THERE IS NOT ONE MARK ON THE COLOMN AND IT HAS ALL THE ORIGIONAL SCRAPING MARKS ON THE WAYS. I DID TAKE THE COVER OFF THE POWER CLAMPING SYSTEM SO I COULD GREASE IT. IT WILL GO BACK ON WHEN I DO THE VIDEO. EMAIL WITH QUESTIONS. BUYER PAYS SHIPPING. THIS MUST GO ON A DOUBLE DROP TRAILER TO BE TRANSPORTED OVER THE ROAD. THANKS KENNY                                        https://youtu.be/hbr0HqcpGWo                                                                                     RUMFORD SUPPLY & MACHINERY COMPANY INC.                                                                                                                263 PINE STREET                                                                                                              SEEKONK, MA. 02771                                                                                                                 TEL 1-508-639-5199                                                                                     SERVING THE MACHINE TOOL INDUSTRY FOR 56 YEARS

Directions

Similar products from Tools for Drilling & Tapping Equipment

BILZ TYPE TAP ADAPTER SIZE 2 FOR 5/16" TAP STK 8747

BILZ TYPE TAP ADAPTER SIZE 2 FOR 5/16" TAP STK 8747

  • Wadley, Alabama, United States
  • Jun 4th
BILZ TYPE SIZE 2 TAP ADAPTER FOR 7/8" TAP STK 8749

BILZ TYPE SIZE 2 TAP ADAPTER FOR 7/8" TAP STK 8749

  • Wadley, Alabama, United States
  • Jun 4th
TAPMASTER TAP ADAPTER BILZ SIZE 1 FOR #10 TAP TORQUE CONTROL STK 8746

TAPMASTER TAP ADAPTER BILZ SIZE 1 FOR #10 TAP TORQUE CONTROL STK 8746

  • Wadley, Alabama, United States
  • Jun 4th
BILZ TYPE TAP ADAPTER SIZE 2 FOR 1/2" TAP STK 8748

BILZ TYPE TAP ADAPTER SIZE 2 FOR 1/2" TAP STK 8748

  • Wadley, Alabama, United States
  • Jun 4th
BILZ TYPE SIZE 2 TAP ADAPTER FOR 7/8" TAP STK 8750

BILZ TYPE SIZE 2 TAP ADAPTER FOR 7/8" TAP STK 8750

  • Wadley, Alabama, United States
  • Jun 4th
Hause Holomatic 2607 Drilling Heads #529

Hause Holomatic 2607 Drilling Heads #529

  • Roanoke, Virginia, United States
  • Jun 4th
Hause Holomatic 2607 Drilling Heads #523

Hause Holomatic 2607 Drilling Heads #523

  • Roanoke, Virginia, United States
  • Jun 4th
BILZ WE2 TAP ADAPTER FOR 7/8" TAP STK 8752

BILZ WE2 TAP ADAPTER FOR 7/8" TAP STK 8752

  • Wadley, Alabama, United States
  • Jun 4th
Heli-Coil - 2288-5 5/16-18 Size Thread, Thread Insert Hand Installation Tool

Heli-Coil - 2288-5 5/16-18 Size Thread, Thread Insert Hand Installation Tool

  • Elyria, Ohio, United States
  • Jun 3rd
HELICOIL 1185-2CN 164 SCREW THREAD INSERTS QTY. 100

HELICOIL 1185-2CN 164 SCREW THREAD INSERTS QTY. 100

  • Elyria, Ohio, United States
  • Jun 3rd
Recoil - 1/4-20 UNC, 1/2 Inch OAL, Free Running Helical Insert QTY.44 EX7103044

Recoil - 1/4-20 UNC, 1/2 Inch OAL, Free Running Helical Insert QTY.44 EX7103044

  • Elyria, Ohio, United States
  • Jun 3rd
New!! "HELICOIL" 12 Thread Repair Replacement Inserts 1/4 -20 x.375 Heli R1185-4

New!! "HELICOIL" 12 Thread Repair Replacement Inserts 1/4 -20 x.375 Heli R1185-4

  • Grand Rapids, Michigan, United States
  • Jun 3rd
HELICOIL 1191-3CN380 40PCS

HELICOIL 1191-3CN380 40PCS

  • Elyria, Ohio, United States
  • Jun 3rd
SIEVERT PS-2001 Roofing Heat Air Gun Welder

SIEVERT PS-2001 Roofing Heat Air Gun Welder

  • New Haven, Connecticut, United States
  • Jun 3rd
Commander 32 Lead Screw & Nut

Commander 32 Lead Screw & Nut

  • Haverhill, Massachusetts, United States
  • Jun 3rd
Commander 56 PL Lead Screw & Nut

Commander 56 PL Lead Screw & Nut

  • Haverhill, Massachusetts, United States
  • Jun 3rd
Commander 27 Lead Screw & Nut

Commander 27 Lead Screw & Nut

  • Haverhill, Massachusetts, United States
  • Jun 3rd
set of 5 easy out screw extractors #6,#5,2-#4, #3 all used USA mark

set of 5 easy out screw extractors #6,#5,2-#4, #3 all used USA mark

  • Bloomington, Indiana, United States
  • Jun 3rd
Komet ABS 50 22mm Indexable Drill 4.5" LOC U20 02200 IP8 2018 7784 (LOC1356B)

Komet ABS 50 22mm Indexable Drill 4.5" LOC U20 02200 IP8 2018 7784 (LOC1356B)

  • Laingsburg, Michigan, United States
  • Jun 3rd
Komet ABS 63 27mm Indexable Drill UV2100920 2018 7421 (LOC1426A)

Komet ABS 63 27mm Indexable Drill UV2100920 2018 7421 (LOC1426A)

  • Laingsburg, Michigan, United States
  • Jun 3rd

People who viewed this item also vieved

H&G STYLE 12-24 CHASERS, 100 SERIES, 3 SETS

H&G STYLE 12-24 CHASERS, 100 SERIES, 3 SETS

  • Fox Lake, Illinois, United States
  • Jan 30th
H&G STYLE 4-40 CHASERS, 100 SERIES, 2 SETS, GROUND FROM SHARPENING

H&G STYLE 4-40 CHASERS, 100 SERIES, 2 SETS, GROUND FROM SHARPENING

  • Fox Lake, Illinois, United States
  • Jan 30th
H&G STYLE 4-40 CHASERS, 100 SERIES

H&G STYLE 4-40 CHASERS, 100 SERIES

  • Fox Lake, Illinois, United States
  • Jan 30th
JAPAX EDM FLUSH CUPS FOR MGV OEM #0001-01 LDMS LOWER

JAPAX EDM FLUSH CUPS FOR MGV OEM #0001-01 LDMS LOWER

  • Mundelein, Illinois, United States
  • Jan 30th
JAPAX EDM FLUSH CUPS MGS OEM #1131-01 LU3B LOWER

JAPAX EDM FLUSH CUPS MGS OEM #1131-01 LU3B LOWER

  • Mundelein, Illinois, United States
  • Jan 30th
JAPAX EDM FLUSH CUPS FOR MGS OEM #1126 LU3B/UPPER

JAPAX EDM FLUSH CUPS FOR MGS OEM #1126 LU3B/UPPER

  • Mundelein, Illinois, United States
  • Jan 30th
5 Ton 1.25" Strk Havir PressRite 0 OBI PRESS, Air Clutch

5 Ton 1.25" Strk Havir PressRite 0 OBI PRESS, Air Clutch

  • Harrison, New Jersey, United States
  • Jan 30th
12" W 0.125" Cap. Cooper-Weymouth SE12B STRAIGHTENER

12" W 0.125" Cap. Cooper-Weymouth SE12B STRAIGHTENER

  • Harrison, New Jersey, United States
  • Jan 30th
4.72" W 0.196" Cap. Dynamic BRM19/120/12/U STRAIGHTENER, Hydraulic Operation

4.72" W 0.196" Cap. Dynamic BRM19/120/12/U STRAIGHTENER, Hydraulic Operation

  • Harrison, New Jersey, United States
  • Jan 30th
Vintage K.O. Lee Slow Turner Machine 110V from Sunnen Parts Finishing De-Burr

Vintage K.O. Lee Slow Turner Machine 110V from Sunnen Parts Finishing De-Burr

  • Saint Louis, Missouri, United States
  • Jan 30th
SUNNEN MHS-802 CNC HONE GRINDING MACHINE W/ CONTROL CABINETS

SUNNEN MHS-802 CNC HONE GRINDING MACHINE W/ CONTROL CABINETS

  • Cedarburg, Wisconsin, United States
  • Jan 30th
SUNNEN TRUING SLEEVE S-370 S-432 S-557

SUNNEN TRUING SLEEVE S-370 S-432 S-557

  • Lubbock, Texas, United States
  • Jan 30th
6" W 12" L Mitsui-Seiki MSG-200MH SURFACE GRINDER, DRO, OTW DRESSER, V/S Spdl, P

6" W 12" L Mitsui-Seiki MSG-200MH SURFACE GRINDER, DRO, OTW DRESSER, V/S Spdl, P

  • Harrison, New Jersey, United States
  • Jan 30th
16" Swg 24" cc Shigiya GPA-40-60 OD GRINDER, POWER OTW DRESSER, FULL AUTO CYCLE,

16" Swg 24" cc Shigiya GPA-40-60 OD GRINDER, POWER OTW DRESSER, FULL AUTO CYCLE,

  • Harrison, New Jersey, United States
  • Jan 30th
18" Swg 72" cc Landis 3R OD GRINDER, HYD. Tbl, AUTO INFEED, RAPID, 18" WHEEL, CO

18" Swg 72" cc Landis 3R OD GRINDER, HYD. Tbl, AUTO INFEED, RAPID, 18" WHEEL, CO

  • Harrison, New Jersey, United States
  • Jan 30th
BUCK HEAVY DUTY MOUNTING PLATE W/ D1-8 MOUNT

BUCK HEAVY DUTY MOUNTING PLATE W/ D1-8 MOUNT

  • Ellington, New York, United States
  • Jan 30th
6" DIAMETER DOG DRIVER FACE PLATE W/ D1-4 MOUNT

6" DIAMETER DOG DRIVER FACE PLATE W/ D1-4 MOUNT

  • Ellington, New York, United States
  • Jan 30th
HEAVY DUTY 5-1/2" DIA. MOUNTING PLATE W/ 2-1/4"-6 THREADED MOUNT

HEAVY DUTY 5-1/2" DIA. MOUNTING PLATE W/ 2-1/4"-6 THREADED MOUNT

  • Ellington, New York, United States
  • Jan 30th
Kennametal CAT 50 Boring bar CNC

Kennametal CAT 50 Boring bar CNC

  • Millstadt, Illinois, United States
  • Jan 30th
Van Norman # 45 Indexing Dividing Head Buck 6jaw for Bridgeport milling machine

Van Norman # 45 Indexing Dividing Head Buck 6jaw for Bridgeport milling machine

  • Millstadt, Illinois, United States
  • Jan 30th
Cincinnati #2 horizontal milling machine vise 12" wide .looks to be original

Cincinnati #2 horizontal milling machine vise 12" wide .looks to be original

  • Millstadt, Illinois, United States
  • Jan 30th
WALTER TWIN BORE B3220G.N4 041 056.Z2 (LOC1110A)

WALTER TWIN BORE B3220G.N4 041 056.Z2 (LOC1110A)

  • Laingsburg, Michigan, United States
  • Jan 30th
Modular Air Filtration Systems,Inc. Northern Air Corporation

Modular Air Filtration Systems,Inc. Northern Air Corporation

  • East Providence, Rhode Island, United States
  • Jan 30th
25” x 240/96” (20’/8’) Lodge & Shipley

25” x 240/96” (20’/8’) Lodge & Shipley

  • Watertown, Connecticut, United States
  • Jan 30th
Doall Heavy Work Slides

Doall Heavy Work Slides

  • Baton Rouge, Louisiana, United States
  • Jan 30th
Ratchet Table Feed Assembly, Stock Pusher

Ratchet Table Feed Assembly, Stock Pusher

  • Baton Rouge, Louisiana, United States
  • Jan 30th
Saw Guide Bearing Assembly

Saw Guide Bearing Assembly

  • Baton Rouge, Louisiana, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies