+ Post new Ad
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition, US $6,000.00 – Picture 0
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition, US $6,000.00 – Picture 1
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition, US $6,000.00 – Picture 2
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition, US $6,000.00 – Picture 3
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition, US $6,000.00 – Picture 4
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition, US $6,000.00 – Picture 5
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition, US $6,000.00 – Picture 6
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition, US $6,000.00 – Picture 7
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition, US $6,000.00 – Picture 0
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition, US $6,000.00 – Picture 1
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition, US $6,000.00 – Picture 2
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition, US $6,000.00 – Picture 3
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition, US $6,000.00 – Picture 4
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition, US $6,000.00 – Picture 5
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition, US $6,000.00 – Picture 6
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition, US $6,000.00 – Picture 7

Forklift By Clark Model Cgc25 4,600 Lb. Capacity In Very Good Condition

US $6,000.00

  • Dalton, Georgia, United States
  • Feb 28th
Open on mobile:
QR code
Forklift by Clark Model CGC25 4,600 Lb. Capacity In Very Good Condition  Three stage, tilt and side shift. 42" forks.  Run meter shows 4,995 hours but we can not verify the hours but from the condition of the unit we feel it is accurate.Starter was just rebuilt and brakes were serviced.  This item is welcome to inspection by the buyer or buyer's representative before purchase.  Please contact us for further details. Shipping: Buyer is responsible for shipping costs and due to the nature of this item, it will need to be shipped common carrier or local pick up.. Please contact us with your zip code and whether it would be going to a commercial address with a dock or outdoor forklift (either yours, one you are employed at, or a friend or relative's), one without, or residence for an accurate shipping quote. It is imperative that you provide both pieces of information! Please note residential delivery is typically higher, so it is better to have it delivered to a commercial address or to one of our carrier's terminals in your area for pickup at the terminal. Also, we are able to ship using your carrier if preferred and we will provide the necessary contact information to forward a bill of lading, pickup address, etc. Local pickup is available as well. Can you believe our  price? Packoderm Industrial - Eliminating pack rats one sell at a time! Sellers: Delight buyers. Get your own map of past buyers. FREE! Sellers: Add a FREE map to your listings. FREE!
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Clark
Model CGC25

Directions

Similar products from Tools for Other Machines

0.63" Rivet Cap Baltec RN-331 RIVETER, Radial

0.63" Rivet Cap Baltec RN-331 RIVETER, Radial

  • Harrison, New Jersey, United States
  • Feb 28th
0.63" Rivet Cap Baltec RN-331 RIVETER, Updated To Current Control!!!

0.63" Rivet Cap Baltec RN-331 RIVETER, Updated To Current Control!!!

  • Harrison, New Jersey, United States
  • Feb 28th
14" J & L PC14-A OPTICAL COMPARATOR

14" J & L PC14-A OPTICAL COMPARATOR

  • Harrison, New Jersey, United States
  • Feb 28th
15" Dia. 3 Jaws Kitagawa B215 LATHE Chk, Hydraulic - Unused

15" Dia. 3 Jaws Kitagawa B215 LATHE Chk, Hydraulic - Unused

  • Harrison, New Jersey, United States
  • Feb 28th
MACHINIST LATHE MILL Lever Handle for Atlas Lathe Shaper Milling Machine

MACHINIST LATHE MILL Lever Handle for Atlas Lathe Shaper Milling Machine

  • Morris Plains, New Jersey, United States
  • Feb 28th
3-D Pantograph, Engraver with type sets, Alexander D180

3-D Pantograph, Engraver with type sets, Alexander D180

  • Woodstock, Illinois, United States
  • Feb 28th
Abanaki SMMS1-12 Belt Oil Skimmer, 115V, 12" Reach, 1" Width, 1 GPH | (23D)

Abanaki SMMS1-12 Belt Oil Skimmer, 115V, 12" Reach, 1" Width, 1 GPH | (23D)

  • Saint Louis, Missouri, United States
  • Feb 28th
Dumore Tool Post Grinder with Accessories & Case Model 44-011

Dumore Tool Post Grinder with Accessories & Case Model 44-011

  • Pawtucket, Rhode Island, United States
  • Feb 28th
Kraft Tools 20" x 5" Round End Cement Trowel w/ProForm Handle CF288PF

Kraft Tools 20" x 5" Round End Cement Trowel w/ProForm Handle CF288PF

  • Bertrand, Nebraska, United States
  • Feb 28th
Kraft Tools 20"x5" Golden Stainless Steel Finish Trowel w/ProForm Handle CF549PF

Kraft Tools 20"x5" Golden Stainless Steel Finish Trowel w/ProForm Handle CF549PF

  • Bertrand, Nebraska, United States
  • Feb 28th
10” x 10 Ga Clausing/Edwards Hydraulic Corner Nother

10” x 10 Ga Clausing/Edwards Hydraulic Corner Nother

  • Watertown, Connecticut, United States
  • Feb 28th
Antique Apothecary/Assay Scale Seederer-Kohlbusch

Antique Apothecary/Assay Scale Seederer-Kohlbusch

  • Summit, New Jersey, United States
  • Feb 28th
Midwest Tool & Cutlery MW-P6716B Bulldog Aviation Tin Snips

Midwest Tool & Cutlery MW-P6716B Bulldog Aviation Tin Snips

  • Harrison, New York, United States
  • Feb 28th
Vintage BROWN & SHARPE Wiggler Set No. 795 Machinist Tools

Vintage BROWN & SHARPE Wiggler Set No. 795 Machinist Tools

  • Newington, Connecticut, United States
  • Feb 28th
FELLOWS NO. 6A-TYPE GEAR SHAPER MACHINE WITH TOOLING

FELLOWS NO. 6A-TYPE GEAR SHAPER MACHINE WITH TOOLING

  • Sharon Hill, Pennsylvania, United States
  • Feb 28th
MACHINIST LATHE MILL Rotary Table Grinder Milling Machine Handle Lever Wheel

MACHINIST LATHE MILL Rotary Table Grinder Milling Machine Handle Lever Wheel

  • Morris Plains, New Jersey, United States
  • Feb 26th
MG ENG. JEWELERS MINI THREAD ROLLING / HEADING MACHINE MDL 00

MG ENG. JEWELERS MINI THREAD ROLLING / HEADING MACHINE MDL 00

  • Fountain Valley, California, United States
  • Feb 26th
80mm x 35m (3.1"*105 feet) Silver Channel Letter Aluminum Coil Strips

80mm x 35m (3.1"*105 feet) Silver Channel Letter Aluminum Coil Strips

  • Haidian Beijing, China
  • Feb 26th
KURT DOUBLE LOCK 4" OPENING MILLING VISE - very good condition!

KURT DOUBLE LOCK 4" OPENING MILLING VISE - very good condition!

  • Redmond, Oregon, United States
  • Feb 26th
Custom Leather Craft Electrical & Maintenance Tool Carrier

Custom Leather Craft Electrical & Maintenance Tool Carrier

  • Hayward, California, United States
  • Feb 26th

People who viewed this item also vieved

HELICOIL H-COIL SCREW THREAD MANDREL TOOL INSTALL #7751-5 SIZEM5X0.8 MIB

HELICOIL H-COIL SCREW THREAD MANDREL TOOL INSTALL #7751-5 SIZEM5X0.8 MIB

  • Fort Myers, Florida, United States
  • Jan 30th
HELICOIL H-COIL SCREW THREAD MANDREL INSTALL SID67400067488 #7751-4 SIZE1/4-20

HELICOIL H-COIL SCREW THREAD MANDREL INSTALL SID67400067488 #7751-4 SIZE1/4-20

  • Fort Myers, Florida, United States
  • Jan 30th
2 HELICOIL H-COIL SCREW THREAD MANDREL INSTALL TOOL SID00067421 #7751-4 SIZE4-40

2 HELICOIL H-COIL SCREW THREAD MANDREL INSTALL TOOL SID00067421 #7751-4 SIZE4-40

  • Fort Myers, Florida, United States
  • Jan 30th
SMALL MACHINIST STEEL ANGLE PLATE GRINDING MILLING JIG FIXTURE

SMALL MACHINIST STEEL ANGLE PLATE GRINDING MILLING JIG FIXTURE

  • Waterford, Michigan, United States
  • Jan 30th
Model #125M TIMESAVER 25" Belt Sander for Deburring & Finishing w/Baldor motor

Model #125M TIMESAVER 25" Belt Sander for Deburring & Finishing w/Baldor motor

  • Bensalem, Pennsylvania, United States
  • Jan 30th
DUMORE INTERNAL GRINDING SPINDLES, 5T-200

DUMORE INTERNAL GRINDING SPINDLES, 5T-200

  • Overland Park, Kansas, United States
  • Jan 30th
Atlas Metal Lathe 5" Chuck 3 Jaw 1 1/2" by 8 TPI Threads Craftsman

Atlas Metal Lathe 5" Chuck 3 Jaw 1 1/2" by 8 TPI Threads Craftsman

  • Maple Valley, Washington, United States
  • Jan 30th
UNIVERSAL LATHE TUR 630A X3000 FAT

UNIVERSAL LATHE TUR 630A X3000 FAT

  • Mount Prospect, Illinois, United States
  • Jan 30th
CLAUSING 12" 5900 LATHE DRUM REVERSING SWITCH

CLAUSING 12" 5900 LATHE DRUM REVERSING SWITCH

  • Cheswick, Pennsylvania, United States
  • Jan 30th
Bridgeport J Head

Bridgeport J Head

  • Spartanburg, South Carolina, United States
  • Jan 30th
KENNAMETAL STUB MILLING ARBOR SS150 SA150347 1-1/2

KENNAMETAL STUB MILLING ARBOR SS150 SA150347 1-1/2

  • Wadley, Alabama, United States
  • Jan 30th
TOOL HOLDER MILLING ARBOR 1-1/4" DIA HORIZONTAL STRAIGHT SHANK

TOOL HOLDER MILLING ARBOR 1-1/4" DIA HORIZONTAL STRAIGHT SHANK

  • Seattle, Washington, United States
  • Jan 30th
LOT OF 6 TURRET PUNCH PRESS PUNCH SET SPRING ETC FITS WIEDEMANN PRESS

LOT OF 6 TURRET PUNCH PRESS PUNCH SET SPRING ETC FITS WIEDEMANN PRESS

  • La Puente, California, United States
  • Feb 13th
Masterform Roll Former for Metal Roofing Panels

Masterform Roll Former for Metal Roofing Panels

  • Jackson, Mississippi, United States
  • Feb 13th
L.S. STARRETT COMPANY SATIN CHROME MICROMETER 1" NO. 230 HARDENED GROUND SCREW

L.S. STARRETT COMPANY SATIN CHROME MICROMETER 1" NO. 230 HARDENED GROUND SCREW

  • Phoenix, Arizona, United States
  • Feb 13th
NICHOLSON FILES (4)

NICHOLSON FILES (4)

  • Frackville, Pennsylvania, United States
  • Feb 13th
Struers Knuth-Rotor 2 Manual Polisher Grinder Machine

Struers Knuth-Rotor 2 Manual Polisher Grinder Machine

  • Exeter, New Hampshire, United States
  • Feb 13th
SUNNEN HONING STONES K8A65

SUNNEN HONING STONES K8A65

  • Metter, Georgia, United States
  • Feb 13th
Geometric 9/16 DSA Threading Head W/17 Sets of New Chasers

Geometric 9/16 DSA Threading Head W/17 Sets of New Chasers

  • Milwaukee, Wisconsin, United States
  • Feb 24th
Geometric 5/16 DSA Threading Head W/23 Sets of New Chasers

Geometric 5/16 DSA Threading Head W/23 Sets of New Chasers

  • Milwaukee, Wisconsin, United States
  • Feb 24th
Landis Chasers 10P 1" U.S.S 4TPI .368 Thick .937 High

Landis Chasers 10P 1" U.S.S 4TPI .368 Thick .937 High

  • Milwaukee, Wisconsin, United States
  • Feb 24th
ANILAM RBS-5 reader head

ANILAM RBS-5 reader head

  • Canton, Ohio, United States
  • Feb 26th
ANILAM RBS-10 reader head

ANILAM RBS-10 reader head

  • Canton, Ohio, United States
  • Feb 26th
ANILAM RBS 1 scale and reader head

ANILAM RBS 1 scale and reader head

  • Canton, Ohio, United States
  • Feb 26th
Scothman 14" Cold Saw w/Auto Clamp Vice & Down Feed

Scothman 14" Cold Saw w/Auto Clamp Vice & Down Feed

  • Huntington Beach, California, United States
  • Mar 28th
HARDINGE CNC CHUCKER,ALLEN BRADLEY 7300 UP GRADED TO SERIES 9

HARDINGE CNC CHUCKER,ALLEN BRADLEY 7300 UP GRADED TO SERIES 9

  • Pinellas Park, Florida, United States
  • Mar 28th
HEM Saw Blade Guides **Aftermarket**(See Description for Model Compatibility)

HEM Saw Blade Guides **Aftermarket**(See Description for Model Compatibility)

  • Mooresville, Indiana, United States
  • Mar 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies