FLUKE TS-44 PRO DSL Data Telephone Butt Set with Speaker, US $39.50 – Picture 0

FLUKE TS-44 PRO DSL Data Telephone Butt Set with Speaker, US $39.50 – Picture 1

FLUKE TS-44 PRO DSL Data Telephone Butt Set with Speaker, US $39.50 – Picture 2

Fluke Ts-44 Pro Dsl Data Telephone Butt Set With Speaker

US $39.50

Pikeville, North Carolina, United States
Jun 9th

Open on mobile:
QR code

FLUKE NETWORKS TS 44PRO Linemans Telephone Butt set The Fluke Networks TS44 Pro telephone test set, available with various line cord connectors to suit specific applications, detects dial tone and polarity; places and receives calls; indicates line voltage and low loop current; has a one-way speaker for hands-free listening and a two-way speakerphone for hands-free conversation during testing; tests POTS (plain old telephone service) quality on live DSL lines without disrupting data services; and stores up to ten 23-digit telephone numbers which can be speed-dialed via the keypad. It provides tone or pulse operation. The test set has two basic modes of operation: talk mode for off-hook operations including verifying dialing and receiving calls, and monitor mode for on-hook operations including checking for an idle line, listening for line noise, and measuring DC voltage on the line. In monitor mode, the test set provides high-impedance monitoring of lines without disrupting service. When switching to talk mode, the data lockout feature tests the line for high-speed data signals and remains on hook and beeps if such signals are detected. The lockout can be overridden to pull dial tone from a noise line. This test set passes a 20-foot (6 m) drop test and has a waterproof case that exceeds American Military Specification MIL-STD-810E. The keypad has 12 standard dialing keys including star and pound, and function keys to store, recall, and redial numbers and to pause for accessing a second dial tone when dialing through a PBX (private branch exchange), among other functions. LEDs on the unit indicate line polarity when off hook, normal or low (below 23 mA) loop current, five different ranges of voltage detected, mute, and battery status. At a voltage greater than 140 VDC, the test set locks out and will not allow off-hook operation. The current LED flashes for 5 seconds to indicate a reading below 23 mA and remains solid for normal readings. The test set is made of high-impact plastic. A spring-loaded belt clip at the base of the unit provides a secure hold on belt loops and D-rings. Additional specifications include various environmental operating conditions. Telephone test sets, also called butt sets, are used by telecom technicians to troubleshoot and maintain copper-wire voice-subscriber lines such as POTS (plain old telephone service) lines. Specifications Line current range Off-hook: 10 to 100 mA DC resistance Off-hook: 150 ? (nominal); on-hook: greater than 3 M? AC impedance Off-hook: 600 ? (nominal), 300 to 3400 Hz; on-hook: greater than 120 k?, 300 to 3400 Hz Rotary dial pulse rate 10 + or – 1 pulses per second DTMF (dual-tone multi-frequency) tone frequency error + or – 1.5% maximum Memory capacity Ten 23-digit speed-dial numbers, one redial number Power source Shared line power; 9V alkaline battery (included) for test set when on-hook and for speaker when off-hook Dimensions 254 x 96 x 107 mm/10 x 3.75 x 4.25 in (H x W x D) Weight 0.68 kg/1.5 lb *H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Datacom and telecom installation and test devices, such as toners and test sets, check cabling and wiring to help ensure proper connections and operation. Tone generator and probe sets, also called toners, are used to locate, trace, and isolate cables in copper media networks. Telephone test sets, also called butt sets, are specialized telephones that connect to telephone lines to check for proper operation and to isolate trouble. Some test sets incorporate a TDR (time-domain reflectometer) and toner for determining cable length and locating faults. While certain devices may be used on live networks, others are only suitable for inactive networks. Field technicians and installers use these devices to set up, maintain, and troubleshoot datacom and telecom cabling within a building or in outside plant (OSP) applications. Fluke Networks manufactures tools for network infrastructure installation, testing, certification, and troubleshooting, in copper, fiber, and wireless networks, with its tools widely used by contractors, enterprises, and communication service providers. The company, which operates globally, is based in Everett, WA. What's included? Fluke Networks TS44 Pro telephone test set Test leads with Angled Bed-of-Nails and Piercing Pin Clips Instructions WORKS, But I hear an AC hum on the line unless I touch one of the bare clip leads. Sold AS-IS not returnable. Buyer to pay shipping. Payment is expected within 7 days, or the second highest bidder may be given the chance to purchase. CLICK HERE for full information on shipping terms. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Hear a AC hum when connecting to phone line, which goes away when touching either of the clip leads. Sold AS-IS.”