Fluke 773 Milliamp Process Clamp Meter **MINT**, US $829.00 – Picture 0

Fluke 773 Milliamp Process Clamp Meter **MINT**, US $829.00 – Picture 1

Fluke 773 Milliamp Process Clamp Meter **MINT**, US $829.00 – Picture 2

Fluke 773 Milliamp Process Clamp Meter **MINT**, US $829.00 – Picture 3

Fluke 773 Milliamp Process Clamp Meter **MINT**, US $829.00 – Picture 4

Fluke 773 Milliamp Process Clamp Meter **MINT**, US $829.00 – Picture 5

Fluke 773 Milliamp Process Clamp Meter **MINT**, US $829.00 – Picture 6

Fluke 773 Milliamp Process Clamp Meter **MINT**, US $829.00 – Picture 7

Fluke 773 Milliamp Process Clamp Meter **MINT**, US $829.00 – Picture 8

Fluke 773 Milliamp Process Clamp Meter mint

US $829.00

Chino Hills, California, United States
Mar 7th

Open on mobile:
QR code

Fluke 773 Milliamp Process Clamp Meter Used for one project in mint like new condition with complete accessory! MSRP Online $1,199.00 Actual items are showing in pictures. Items are free from owner marking & S/N is still on the meter. Please review my 100% positive feedback from other Fluke buyers and purchase with confidence. I will ship via USPS priority mail on next business day after payment receive (PayPal only). Fluke 773 Milliamp Process Clamp Meter Fluke 773 milliamp clamp meter is accurate, saves time & money by measuring output signals without bringing down the system, and adds simultaneous mA source/measure. Need more hours in your day? Save time by NOT breaking the loop on 4-20 mA signal measurements. Are you spending time: Taking mA measurements by removing a wire and breaking the loop Calling the control room to isolate a loop Testing analog input/output on a console Troubleshooting devices with mA inputs and outputs Repairing intermittent or erratic 4-20 mA loops Going back to the shop to get extra tools If you need more time in your busy day take a good look at the Fluke 773 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system. Here are some specific ways the Fluke 773 Clamp Meters will help you: Milliamp Clamp Features Measure mA signals for PLC and control system analog I/O without breaking the loop Measures low level dc current Correlate process indication with real physical value Measure output signals from transmitters without breaking the loop Maintain and troubleshoot process and automation equipment without breaking the loop No disruption to the process Detachable clamp with extension cable Measurements in tight locations Enables measurements in difficult situations Measurement Spotlight Illuminates hard to see wires in dark enclosures Measurement process is easier and quicker Measure up to 99.9 mA range non-contact Wide range of measurements Measures 10 to 50 mA signals in older control systems Automatic power off After 15 minutes and 2 minute automatic off for backlight and spotlight Saves battery life FEATURES; The 773 mA Clamp Meter features: Best in class 0.2% accuracy 0.01 mA resolution and sensitivity Measure 4 to 20 mA signals without “breaking the loop” Measure mA signals for PLC and control system analog I/O Dual backlit display with both mA measurement and percent of 4 to 20 mA span Measurement Spotlight illuminates hard to see wires in dark enclosures Detachable clamp with extension cable for measurements in tight locations Measure 10 to 50 mA signals in older control systems using the 99.9 mA range Automatically change the 4 to 20 mA output for remote testing Power saving features, auto-off, backlight timeout extend battery life Hold function captures and displays changing measurements Measure 4 to 20 mA signals with in-circuit measurement Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters Source 4 to 20 mA signals for testing control system I/O or I/Ps mA output linear ramp or 25% step output Automatically change the 4 to 20 mA output for remote testing DC voltage measurement to verify 24V power supplies or voltage I/O signals Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp Enables milliamp signal logging to a separate logging device without breaking the loop Output mA signal enables a logging DMM or other device to record the 4- to 20 mA signal without breaking the loop mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal Apply a mA input signal to a device and measure its’ 4-20 mA output on devices such as valves or mA isolators Voltage output linear ramp or 25% step output Automatically change the voltage output for remote testing Specifications Diameter of measurable conductor 0.177" or 4.5 mm max Operating temperature -10 to 50?C Storage temperature -25 to 60?C Operating humidity < 90% @ <30?C, < 75% @ 30 to 55?C Operating altitude 0 to 2000 m IP rating IP 40 Size 44 x 70 x 246 mm (2 7/8 x 5 3/4 x 11 5/8 in) Weight 410 g, (14.4 oz) Vibration Random 2 g, 5 to 500 Hz Shock 1 meter drop test (except the jaw) EMI/RFI Meets EN61326-1 For current measurement w/ JAW, add 1mA to specification for EMC field strengths of 1V/m up to 3V/m. Temperature coefficient 0.01% ?C (< 18?C or > 28?C) Power, battery life (4) AA 1.5 V Alkaline, IEC LR6, 12 hours in mA source into 500 ohms Functional Specifications mA measurement (measured by clamp) Resolution / range 0 to 20.99 mA Accuracy 0.2% + 2 counts Resolution / range 21.0mA to 100.0 mA Accuracy 1% + 5 counts mA measurement (measured in series with test jacks) Resolution / range 0 to 24.00 mA Accuracy 0.2% + 2 counts mA source (maximum mA drive: 24 mA into 1,000 ohms) Resolution / range 0 to 24.00 mA Accuracy 0.2% + 2 counts mA simulate (maximum voltage 50 V dc) Resolution / range 0 to 24.00 mA Accuracy 0.2% + 2 counts Voltage source (2 mA maximum drive current) Resolution / range 0 to 10.00 V DC Accuracy 0.2% + 2 counts Voltage measure Resolution / range 0 to 30.00 V DC Accuracy 0.2% + 2 counts

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Fluke
Model	773

Fluke 773 Milliamp Process Clamp Meter **mint**

Fluke 773 Milliamp Process Clamp Meter mint