Fits 2gc-11p Edco Blocks 3pk For Exposed Concrete New Jumbo Segments

US $243

USA, United States
Jun 1st

Open on mobile:
QR code

(1) SET (3 TOTAL 6 SEGMENTED BLOCKS) OF PROFESSIONAL GRADE TRUELINETM DIAMOND BLOCKS. THIS PRODUCT IS MANUFACTURED FOR CONCRETE FLOOR GRINDERS IN AIDING IN REMOVING THIN LAYERS OF COATINGS (URETHANE OR EPOXY ) AND TOPPINGS WITHOUT CLOGGING. DIAMOND BLOCKS CAN ALSO PROVIDE SMOOTHING TROWEL MARKS, UNEVEN/ROUGH OR PATCHED SLABS AND LEVELING ON CONCRETE OR TERRAZZO. PROVIDES MATERIAL REMOVAL RATES UP TO SEVEN TIMES FASTER THAN GRINDING STONES... ANY QUESTIONS, CALL CUSTOMER SERVICE AT 800-924-3158 Retail: $687.00 30 GRIT: FOR GENERAL PURPOSE GRINDING. MEDIUM DIAMOND MATRIX BOND FOR A 70/30 RATIO 3500/6500 PSI CONCRETE TO EPOXY We have manufactured the best diamond block in the country for the last 7 years. We have made the segment aggregate with the highest quality minerals and made the product 60% longer life then the industry standard. Our blocks our longer, higher, have more diamond particles per layer than any other block currently manufactured. We are the first company in the country to produce a product with arrow dynamic base technology with a hollow base to separate the grinded particles away from the 6 segments at a multi millionth of a second to increase segment life by not re-grinding the same particles over and over with our rounded end base plates. FITS FOLLOWING EDCO FLOOR GRINDERS: SINGLE-DISC GRINDER: SEC-1.5L AND SEC-2B TAKES 3 DIAMOND BLOCKS (1) SET DUAL-DISC GRINDER: 2EC-1.5B, 2EC-2B,2EC-3B, 2GC-5.5H, 2GC-11H AND 2GC-11P TAKES 6 DIAMOND BLOCKS (2) SET FOUR-DISC GRINDER: 411-5B, 411-11H, AND 411-11P TAKES 12 DIAMOND BLOCKS (4) SET FITS HUSQVARNA / TARGET DUAL TRAC RG 2112 TAKES 6 DIAMOND BLOCKS (2) SETS TESTIMONIALS: I just wanted to take some time and congratulate you on your product. We recently ordered the Diamond Blocks for the Edco 2GC and were completly blown away by them. While the Edco Dyma Serts (official Edco blocks) were supposed to last 30,000sf, they were only lasting 6,000sf. We were grinding 35,000sf and only wish we had found you before...we were able to grind 13,000sf with your product (just like it was promissed to us), but unfortunately those were the last 13,000sf on that job, and I had gone through 4 sets of the Dyma Serts @ around $800.00 each. We will definitely use your company in the future as needed. Please feel free to use us as a reference for your product and company if necessary. Guillermo Vazquez Project Manager FOX FLOORING New Construction * Commercial * Sports Floors * Retail