Druck UPS III Loop Calibrator (new in BOX), US $710.00 – Picture 0

Druck UPS III Loop Calibrator (new in BOX), US $710.00 – Picture 1

Druck UPS III Loop Calibrator (new in BOX), US $710.00 – Picture 2

Druck Ups Iii Loop Calibrator (new In Box)

US $710.00

Miami, Florida, United States
Jan 29th

Open on mobile:
QR code

UP FOR SALE: ONE (1) BRAND NEW, NEVER USED Druck UPS III Loop Calibrator. THE SHIPPING BOX HAS BEEN OPENED TO TAKE A COUPLE OF PICTURES. SPECIFICATIONS: Measure or Source 0 to 24 mA Accuracy 0.01% of reading Dual mA and % readout, linear or flow Step, Span Check, Valve Check, Ramp 6 VDC measurement and continuity HART® compatible APPLICATIONS Graphic Display The graphic display with menu-driven interface is easier to use than traditional knobs, switches, multi-function keys and dual key sequences. Measure or Source 0 to 24 mA An internal 24 V loop supply is available in both measure and source modes, essential during plant shutdowns. Accuracy 0.01% of Reading This includes 12 month stability and temperature effects. The UPS III can maintain a 4:1 calibration ratio with the latest instrumentation and is typically 20 to 80 times more accurate than a Digital Multi-Meter (DMM). Simultaneous % Readout Displays mA and the percentage value of 4 to 20 mA or 0 to 20 mA. The UPS III also converts mA readings to % flow. This is not possible with many loop calibrators. Step, Span Check and Value Check Step quickly through linearity tests and zero/span adjustments. In valve mode, seating can be checked and the positioner set. Auto Step and Ramp Outputs have adjustable rates (1 to 599 s) for single-handed loop testing, valve set-up and slew rate checks. “Fast Set” Output Allows values to be set to within 0.001 mA using the arrow keys. Holding a key quickly ramps the output to the next value. The system is ideal for alarm trip tests. 60 VDC Measurement For loop diagnostics and maintenance of voltage output instruments. Continuity and Switch Test Facility This reduces DMM dependence when fault finding, checking loop integrity and testing switches. Hart Compatible Internal 235 O loop resistor (menu selectable) EMC compliance to EN 61326-1 Complies with heavy industry standard. Most loop calibrators are only suitable for light industrial use. Performance Electrical Power Supply 4 x 1.5 V AA-size alkaline batteries (standard) or universal power supply (see option B) Battery Life 75 hours in read mode, 18 hours at 12 mA Auto Power Down 30 minutes after last key press Low Battery Warning Battery symbol displayed Open Loop Flashes “open loop” Loop Resistance High Flashes “check loop O” Out of Range Displays (over) Hart Resistor 235 O menu selectable loop resistor Environmental Calibration Reference 72°F (22°C) ±2°F(±3.6°C)/RH 45% ±15% Operating Temperature 14°F to 122°F (-10°C to 50°C) Relative Humidity 0% to 90% non-condensing Conformity EN 61010, /EN 61326-1:1997 + A1:1998, CE marked Physical Housing Material High impact ABS Dimensions (w x h x d) 3 in x 5 in x 1 in (77 mm x 129 mm x 24 mm) Weight 9.7 oz (275 g) including batteries Display Graphic LCD, 1.2 in x 2.1 in (31 mm x 54 mm) Electrical Terminals Gold plated, 4 mm sockets

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	DRUCK (GE Sensing)
MPN	Druck UPS III Loop Calibrator
Model	UPS III