+ Post new Ad
Dormer 1/2" Solid Carbide Coolant Fed Drill 5xD TiALN R453, US $109.00 – Picture 0
Dormer 1/2" Solid Carbide Coolant Fed Drill 5xD TiALN R453, US $109.00 – Picture 1
Dormer 1/2" Solid Carbide Coolant Fed Drill 5xD TiALN R453, US $109.00 – Picture 2
Dormer 1/2" Solid Carbide Coolant Fed Drill 5xD TiALN R453, US $109.00 – Picture 0
Dormer 1/2" Solid Carbide Coolant Fed Drill 5xD TiALN R453, US $109.00 – Picture 1
Dormer 1/2" Solid Carbide Coolant Fed Drill 5xD TiALN R453, US $109.00 – Picture 2

Dormer 1/2" Solid Carbide Coolant Fed Drill 5xd Tialn R453

US $109.00

  • Round Lake, Illinois, United States
  • Mar 10th
Open on mobile:
QR code
Dormer Solid Carbide Drill (R453) Drill Diameter:  12.70mm (1/2") Shank Diameter:  14mm Flute Length:  76mm Overall Length:  124mm Coolant Fed : Yes Material:  Solid Carbide Coating:  TiALN This drill is new in factory pack. Will ship out one day after receipt of payment.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Domer
MPN R45312.7
Model 1/2" Solid Carbide Drill

Directions

Similar products from Solid Carbide Drill Bits

50 Piece Solid Carbide Drill Bit Set Dremel Jewelry D6 Usa Union Tool

50 Piece Solid Carbide Drill Bit Set Dremel Jewelry D6 Usa Union Tool

  • Middletown, Rhode Island, United States
  • Mar 10th
Vintage Lot Of 3 Micro Dial Expansive Drill Bits

Vintage Lot Of 3 Micro Dial Expansive Drill Bits

  • Astoria, New York, United States
  • Mar 10th
METAL REMOVAL Carbide Drill M43042 1/32x3/8x1.1/2 2F Miniature Drill

METAL REMOVAL Carbide Drill M43042 1/32x3/8x1.1/2 2F Miniature Drill

  • Lexington, North Carolina, United States
  • Mar 10th
5) NEW 0.20mm (.0079") Printed Circuit Board Drills (PCB)

5) NEW 0.20mm (.0079") Printed Circuit Board Drills (PCB)

  • Georgetown, Texas, United States
  • Mar 10th
3/4" SOLID CARBIDE STEP DRILL 1/2" PILOT TIN COATED

3/4" SOLID CARBIDE STEP DRILL 1/2" PILOT TIN COATED

  • Cadiz, Kentucky, United States
  • Mar 10th
3/16" 120° Degree Solid Carbide NC Spot Drill 2" Long Melin Brand USA 17717

3/16" 120° Degree Solid Carbide NC Spot Drill 2" Long Melin Brand USA 17717

  • Seminole, Florida, United States
  • Mar 10th
WALTER TITEX A6785TFP-1/4IN Carbide Coolant Thru Drill, 6.35mm

WALTER TITEX A6785TFP-1/4IN Carbide Coolant Thru Drill, 6.35mm

  • Mount Gilead, North Carolina, United States
  • Mar 10th
WALTER TITEX A6985TFP-4 Carbide Coolant Thru Drill, 4mm, 0.1575"

WALTER TITEX A6985TFP-4 Carbide Coolant Thru Drill, 4mm, 0.1575"

  • Mount Gilead, North Carolina, United States
  • Mar 10th
13.8MM HANITA Carbide Drill 2F TiALN 0.5433"

13.8MM HANITA Carbide Drill 2F TiALN 0.5433"

  • Windsor, Connecticut, United States
  • Mar 10th
.360" x 1.250" Micro 100 Carbide LH Mini Boring/Threading Bar (O 203)

.360" x 1.250" Micro 100 Carbide LH Mini Boring/Threading Bar (O 203)

  • Dallas, Texas, United States
  • Mar 10th
GARR CARBIDE DRILLS 3 FLUTES 2-8.0MM/2-8.5MM

GARR CARBIDE DRILLS 3 FLUTES 2-8.0MM/2-8.5MM

  • Rochester, New Hampshire, United States
  • Mar 10th
HTC , SOLID CARBIDE 1/8" DIA , 2 FL, STRAIGHT FLUTE, SQ END ENDMILL, 1 1/2"OAL

HTC , SOLID CARBIDE 1/8" DIA , 2 FL, STRAIGHT FLUTE, SQ END ENDMILL, 1 1/2"OAL

  • New Castle, Pennsylvania, United States
  • Mar 10th
(5) NEW .#65 (.0350") Printed Circuit Board Drills (PCB)

(5) NEW .#65 (.0350") Printed Circuit Board Drills (PCB)

  • Georgetown, Texas, United States
  • Mar 10th
.290 DIA SOLID CARBIDE GARR 2 LIP STUB END MILL

.290 DIA SOLID CARBIDE GARR 2 LIP STUB END MILL

  • Coventry, Rhode Island, United States
  • Mar 10th
3 new garr .234 solid carbide drills.

3 new garr .234 solid carbide drills.

  • Woburn, Massachusetts, United States
  • Mar 9th
63 PC. Asst Carbide Drills,#78 to .255 no dup.PCB, CNC, Dremel, Watchmaker

63 PC. Asst Carbide Drills,#78 to .255 no dup.PCB, CNC, Dremel, Watchmaker

  • Miami, Florida, United States
  • Mar 9th
EMUGE M12 X 1.5 SPIRAL FLUTE 6H PLUG TAP

EMUGE M12 X 1.5 SPIRAL FLUTE 6H PLUG TAP

  • Eureka, Illinois, United States
  • Mar 9th
3D Tool Co. A1616, 1/2" x 1/2" x 1-1/4" x 3-1/2", .030" Radius Solid Carbide End

3D Tool Co. A1616, 1/2" x 1/2" x 1-1/4" x 3-1/2", .030" Radius Solid Carbide End

  • Chillicothe, Missouri, United States
  • Mar 9th
3D Tool Co. A1791, 1/2" x 1/2" x 1-1/4" x 3-1/2", .060" Radius Solid Carbide End

3D Tool Co. A1791, 1/2" x 1/2" x 1-1/4" x 3-1/2", .060" Radius Solid Carbide End

  • Chillicothe, Missouri, United States
  • Mar 9th
New Solid Carbide 3/16" Stub Drill St Louis Tool Co.

New Solid Carbide 3/16" Stub Drill St Louis Tool Co.

  • Independence, Missouri, United States
  • Mar 9th

People who viewed this item also vieved

BOELUBE CUTTING PASTE,soft,70302-12,drill,tap,cutting,milling,cnc,drill press

BOELUBE CUTTING PASTE,soft,70302-12,drill,tap,cutting,milling,cnc,drill press

  • Reno, Nevada, United States
  • Jan 30th
Drill Master Carbide Tipped Gun Drill 3/4" Dia. x 13"Long 1" Shank

Drill Master Carbide Tipped Gun Drill 3/4" Dia. x 13"Long 1" Shank

  • Dallas, Texas, United States
  • Jan 30th
RESHARPENED KENNAMETAL B273Z12000HPG KC7425 SC DRILL XL 12MM/.4724/25XD COOLANT

RESHARPENED KENNAMETAL B273Z12000HPG KC7425 SC DRILL XL 12MM/.4724/25XD COOLANT

  • Salt Lake City, Utah, United States
  • Jan 30th
Precision Twist Taper Length Drill #19 118 Deg HSS Hi Helix L 5 3/4" Flute

Precision Twist Taper Length Drill #19 118 Deg HSS Hi Helix L 5 3/4" Flute

  • Summerville, South Carolina, United States
  • Jan 30th
Precision Twist Taper Length Drill #79 118 Deg HSS L 1 1/2" Flute 5/16" [Misc.]

Precision Twist Taper Length Drill #79 118 Deg HSS L 1 1/2" Flute 5/16" [Misc.]

  • Summerville, South Carolina, United States
  • Jan 30th
4 Machinist Long Drill-Countersink Bits Tool & Die Turning

4 Machinist Long Drill-Countersink Bits Tool & Die Turning

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
Reduced Shank Twist Drill Bit 53/64"

Reduced Shank Twist Drill Bit 53/64"

  • Coventry, Rhode Island, United States
  • Jan 30th
Reduced Shank Twist Drill Bit 7/8"

Reduced Shank Twist Drill Bit 7/8"

  • Coventry, Rhode Island, United States
  • Jan 30th
Reduced Shank Twist Drill Bit 7/8" U.S.A.

Reduced Shank Twist Drill Bit 7/8" U.S.A.

  • Coventry, Rhode Island, United States
  • Jan 30th
Precision Components CAT 40 .250 PTD-6

Precision Components CAT 40 .250 PTD-6

  • Rochester, Indiana, United States
  • Jan 30th
Precision Components CAT 40 .375 PTD-6

Precision Components CAT 40 .375 PTD-6

  • Rochester, Indiana, United States
  • Jan 30th
Precision Components CAT 40-.750 PTD-6

Precision Components CAT 40-.750 PTD-6

  • Rochester, Indiana, United States
  • Jan 30th
13/16X3-3/8X5-3/8 STUB DRILL 2PCS (LW1868-2)

13/16X3-3/8X5-3/8 STUB DRILL 2PCS (LW1868-2)

  • Miami, Florida, United States
  • Feb 13th
3/8X4X6-3/4 DRILL 6PCS (LW1881-6)

3/8X4X6-3/4 DRILL 6PCS (LW1881-6)

  • Miami, Florida, United States
  • Feb 13th
.046X.156LOCX3/4OAL STUB DRILL BIT 100PCS (LW1854-100)

.046X.156LOCX3/4OAL STUB DRILL BIT 100PCS (LW1854-100)

  • Miami, Florida, United States
  • Feb 13th
Cleveland Twist 1-1/2" x 4" P/M Plus 6 Flute End Mill (L578/C43309)

Cleveland Twist 1-1/2" x 4" P/M Plus 6 Flute End Mill (L578/C43309)

  • Clearwater, Florida, United States
  • Feb 21st
20 NEW Cleveland Twist 11/32" + .001 (.3447) SS Reamer (L4001/C27222)

20 NEW Cleveland Twist 11/32" + .001 (.3447) SS Reamer (L4001/C27222)

  • Clearwater, Florida, United States
  • Feb 21st
42 NEW Cleveland Twist 3/16" + .005 (.1925) SS Reamer (CL4001/27212)

42 NEW Cleveland Twist 3/16" + .005 (.1925) SS Reamer (CL4001/27212)

  • Clearwater, Florida, United States
  • Feb 21st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies