+ Post new Ad
DoAll 916 bandsaw, needs work, rebuildable, US $600.00 – Picture 0
DoAll 916 bandsaw, needs work, rebuildable, US $600.00 – Picture 1
DoAll 916 bandsaw, needs work, rebuildable, US $600.00 – Picture 2
DoAll 916 bandsaw, needs work, rebuildable, US $600.00 – Picture 3
DoAll 916 bandsaw, needs work, rebuildable, US $600.00 – Picture 4
DoAll 916 bandsaw, needs work, rebuildable, US $600.00 – Picture 5
DoAll 916 bandsaw, needs work, rebuildable, US $600.00 – Picture 0
DoAll 916 bandsaw, needs work, rebuildable, US $600.00 – Picture 1
DoAll 916 bandsaw, needs work, rebuildable, US $600.00 – Picture 2
DoAll 916 bandsaw, needs work, rebuildable, US $600.00 – Picture 3
DoAll 916 bandsaw, needs work, rebuildable, US $600.00 – Picture 4
DoAll 916 bandsaw, needs work, rebuildable, US $600.00 – Picture 5

Doall 916 Bandsaw, Needs Work, Rebuildable

US $600.00

  • Blandon, Pennsylvania, United States
  • Jan 30th
Open on mobile:
QR code
 Used DoAll 916 horizontal bandsaw, 220V 3PH power, need work. maybe parts but I believe repairable for reasonable $$  Motor works, cylinder works for raising and lowering, air vise works just needs a good rebuilding. have a few spare blades  Issues listed below, but not limited to: - Air hoses need replacement, have some to provide with it - Idler Blade front wheel edge worn down, can be machined down to create another lip with lathe work by a shop, must have had tracking issue in past. - Starter, contactor not holding in when button pushed in, usually a contactor issue - Air regulator could use a replacement - fluid pump needs replacement - Door latch spring clips need replacing - motor belt adjustment hand wheel needs replacing Sold as/is with no warranty, local pick up only. Can assist in loading
Condition For parts or not working :
An item that does not function as intended and is not fully operational. This includes items that are defective in ways that render them difficult to use, items that require service or repair, or items missing essential components. See the seller’s listing for full details.
Seller Notes “Needs work, rebuildable”

Directions

Similar products from Tools for Saws & Cutting Machines

DAKE MODEL #COBRA 350AX SAW (TOLEDO, OH)

DAKE MODEL #COBRA 350AX SAW (TOLEDO, OH)

  • United States
  • Jan 30th
20" DOALL Model 2013-V Vertical Band Saw, New 1999.

20" DOALL Model 2013-V Vertical Band Saw, New 1999.

  • Dayton, Ohio, United States
  • Jan 30th
2 Arbor Shop Press Plate X-BARS + Two 4"X8" Bed Bars, 4 PC Set, 20 Ton, GROUND

2 Arbor Shop Press Plate X-BARS + Two 4"X8" Bed Bars, 4 PC Set, 20 Ton, GROUND

  • Victor, New York, United States
  • Jan 30th
20" RDN Cross Cut Saw, Model C-420A

20" RDN Cross Cut Saw, Model C-420A

  • Elk Grove Village, Illinois, United States
  • Jan 30th
MACHINIST LATHE MILL Famco 1 Arbor Press

MACHINIST LATHE MILL Famco 1 Arbor Press

  • Morris Plains, New Jersey, United States
  • Jan 30th
Ted Machines Automatic Vertical Tilt Frame Band Saw 17"x20" Miter Bandsaw

Ted Machines Automatic Vertical Tilt Frame Band Saw 17"x20" Miter Bandsaw

  • Des Plaines, Illinois, United States
  • Jan 30th
Dake VH-24 Bandsaw Variable speed Hydraulic table for metal or wood

Dake VH-24 Bandsaw Variable speed Hydraulic table for metal or wood

  • Gresham, Oregon, United States
  • Jan 30th
DoAll 1612-0 Band Saw w/ DoAll Blade Welder DBW-12B

DoAll 1612-0 Band Saw w/ DoAll Blade Welder DBW-12B

  • Brownsville, Texas, United States
  • Jan 30th
9 x 32 BRIDGEPORT VERTICAL MILL 1/2 HP WITH M HEAD, VISE, POWER FEED - 3 PHASE

9 x 32 BRIDGEPORT VERTICAL MILL 1/2 HP WITH M HEAD, VISE, POWER FEED - 3 PHASE

  • Pinellas Park, Florida, United States
  • Jan 30th
GROB Vertical Bend Saw For Metal Cutting

GROB Vertical Bend Saw For Metal Cutting

  • Elk Grove Village, Illinois, United States
  • Jan 30th
#AH-320H COSEN 12.6" x 12.6" Horizontal Band Saw w/ Hyd Shuttle Feed (New 2008)

#AH-320H COSEN 12.6" x 12.6" Horizontal Band Saw w/ Hyd Shuttle Feed (New 2008)

  • Hauppauge, New York, United States
  • Jan 30th
#H300A STARTRITE 9" x 13.75" Horizontal Band Saw w Automatic Bar Feed (New 1985)

#H300A STARTRITE 9" x 13.75" Horizontal Band Saw w Automatic Bar Feed (New 1985)

  • Hauppauge, New York, United States
  • Jan 30th
Bolton Tools Band Saw 5 x 6 Metal Cutting Horizontal Band Saw

Bolton Tools Band Saw 5 x 6 Metal Cutting Horizontal Band Saw

  • Rowland Heights, California, United States
  • Jan 30th
Bolton Tools Metal Cutting Slow Speed 14" Cold Cut Saw Swivel Base Cold Saw

Bolton Tools Metal Cutting Slow Speed 14" Cold Cut Saw Swivel Base Cold Saw

  • United States
  • Jan 30th
ROCKWELL Jig BAYONET SAWS MANUAL & GUIDE c/w ORIGINAL ENVELOPE #RR34

ROCKWELL Jig BAYONET SAWS MANUAL & GUIDE c/w ORIGINAL ENVELOPE #RR34

  • Perth, Ontario, Canada
  • Jan 30th
Bolton Tools 11" Slow Speed Metal Cutting Cold Saw With Swivel Base

Bolton Tools 11" Slow Speed Metal Cutting Cold Saw With Swivel Base

  • Rowland Heights, California, United States
  • Jan 30th
Carolina Industrial Horizontal band saw HD10

Carolina Industrial Horizontal band saw HD10

  • Center, Colorado, United States
  • Jan 30th
Band saw wheel 1-1/2" Bore 11-1/2" OD 1" wide 3/4" wide Blade track cast Iron

Band saw wheel 1-1/2" Bore 11-1/2" OD 1" wide 3/4" wide Blade track cast Iron

  • Middlebury, Indiana, United States
  • Jan 30th
Hydmech VW-18 with optional extra vise.

Hydmech VW-18 with optional extra vise.

  • Spokane, Washington, United States
  • Jan 30th
Hydmech S-20A

Hydmech S-20A

  • Spokane, Washington, United States
  • Jan 30th

People who viewed this item also vieved

ISCAR holder S1216H SDUCR-07

ISCAR holder S1216H SDUCR-07

  • Ancona, Italy
  • Jun 1st
ISCAR Cut-Off Blade Tool Block SGTBN 25-5 ( 10 pcs inserts) , Blade SGIH 32-3

ISCAR Cut-Off Blade Tool Block SGTBN 25-5 ( 10 pcs inserts) , Blade SGIH 32-3

  • Ancona, Italy
  • Jun 1st
ISCAR INSERT LATHE CUT OFF TOOL SGFH 26-3 10 pcs insert

ISCAR INSERT LATHE CUT OFF TOOL SGFH 26-3 10 pcs insert

  • Ancona, Italy
  • Jun 1st
Straight-Tooth Milling Cutter, 3.997x.188", 1" Hole, 16tooth

Straight-Tooth Milling Cutter, 3.997x.188", 1" Hole, 16tooth

  • Salt Lake City, Utah, United States
  • Jun 1st
Straight-Tooth Milling Cutter, 6" x 1/8", 1-1/4" Hole, 42tooth

Straight-Tooth Milling Cutter, 6" x 1/8", 1-1/4" Hole, 42tooth

  • Salt Lake City, Utah, United States
  • Jun 1st
Command ER 20 Collet Extension 1" Shank 6.5" OAL DRCE 0020 (LOC1358B)

Command ER 20 Collet Extension 1" Shank 6.5" OAL DRCE 0020 (LOC1358B)

  • Laingsburg, Michigan, United States
  • Jun 1st
Mecatool C 735020 EDM Pallet - FN31

Mecatool C 735020 EDM Pallet - FN31

  • Bloomfield, Connecticut, United States
  • Jun 2nd
CHARMILLES D10 Sinker Type EDM w/ System 3R Holder & ISOPULSE P25 Power Supply

CHARMILLES D10 Sinker Type EDM w/ System 3R Holder & ISOPULSE P25 Power Supply

  • Chatsworth, California, United States
  • Jun 2nd
System 3R 3R-321.2-4x90 Manual Lathe Chuck Mounted FM42

System 3R 3R-321.2-4x90 Manual Lathe Chuck Mounted FM42

  • Bloomfield, Connecticut, United States
  • Jun 2nd
1-1/2 RADNT TUBE STAPLES FBSN1

1-1/2 RADNT TUBE STAPLES FBSN1

  • Mountain View, Arkansas, United States
  • Jun 3rd
3 KETT TOOLS SPINDLE CHUCK WRENCH BIT SAW DRILL POWER TOOL MILITARY SURPLUS USED

3 KETT TOOLS SPINDLE CHUCK WRENCH BIT SAW DRILL POWER TOOL MILITARY SURPLUS USED

  • Westerville, Ohio, United States
  • Jun 3rd
VINTAGE GENERAL NO. 150 FLARING TOOL WITH SCREW YOKE

VINTAGE GENERAL NO. 150 FLARING TOOL WITH SCREW YOKE

  • Lockport, New York, United States
  • Jun 3rd
Kennametal Compression/Tension Tapping Collet Chuck & #8 Collet # SS075TCJ731

Kennametal Compression/Tension Tapping Collet Chuck & #8 Collet # SS075TCJ731

  • Coloma, Wisconsin, United States
  • Jun 4th
TAPMATIC COLLET CHUCK ADAPTOR USE WITH JACOBS RUBBER FLEX

TAPMATIC COLLET CHUCK ADAPTOR USE WITH JACOBS RUBBER FLEX

  • Coloma, Wisconsin, United States
  • Jun 4th
Starrett No.93C T-Handle Tap Wrench

Starrett No.93C T-Handle Tap Wrench

  • Chalfont, Pennsylvania, United States
  • Jun 4th
GLASS CUTTER 3 piece DIAMANTOR GREEN HANDLE STANDARD MULTI TIPS BROWN WOOD

GLASS CUTTER 3 piece DIAMANTOR GREEN HANDLE STANDARD MULTI TIPS BROWN WOOD

  • Staten Island, New York, United States
  • Jun 4th
GLASS CUTTER GROUP vintage - RED DEVIL #023 + FLETCHER #01 - METAL

GLASS CUTTER GROUP vintage - RED DEVIL #023 + FLETCHER #01 - METAL

  • Staten Island, New York, United States
  • Jun 4th
GLASS CUTTER FLETCHER group USA FLETCHER #01 + FLETCHER #02 GREEN METAL

GLASS CUTTER FLETCHER group USA FLETCHER #01 + FLETCHER #02 GREEN METAL

  • Staten Island, New York, United States
  • Jun 4th
Bantam Ironworker Model 5483-p

Bantam Ironworker Model 5483-p

  • Reading, Pennsylvania, United States
  • Jun 6th
New - Spellmaco Transfer Punch Set, 28 Piece, Set 3-17 -NOS

New - Spellmaco Transfer Punch Set, 28 Piece, Set 3-17 -NOS

  • Brownsburg, Indiana, United States
  • Jun 6th
Amada NCT STD D2 C OB .190 x 2.000

Amada NCT STD D2 C OB .190 x 2.000

  • Georgetown, Texas, United States
  • Jun 6th
SA-43 DOUBLE CUT CARBIDE BURR 1/8 IN DIAMETER 1/8 INCH SHANK

SA-43 DOUBLE CUT CARBIDE BURR 1/8 IN DIAMETER 1/8 INCH SHANK

  • Johnson City, New York, United States
  • Jun 7th
Carbide Burr (SB-1) Cylindrical End Cut - Single Cut - 1/4 x 5/8 x 1/4 x 2

Carbide Burr (SB-1) Cylindrical End Cut - Single Cut - 1/4 x 5/8 x 1/4 x 2

  • Johnson City, New York, United States
  • Jun 7th
Carbide Burr (SM-1) Coarse Cut Cone - 1/4 x 1/2 x 1/4 x 2

Carbide Burr (SM-1) Coarse Cut Cone - 1/4 x 1/2 x 1/4 x 2

  • Johnson City, New York, United States
  • Jun 7th
Brown & Sharpe Screw Machine Turret Lathe No 711-172-122 Center and Facing Tool

Brown & Sharpe Screw Machine Turret Lathe No 711-172-122 Center and Facing Tool

  • Flint, Michigan, United States
  • Jun 9th
Brown & Sharpe Screw Machine Turret Lathe No. 711-165-122 Knee Tool 1" Shank

Brown & Sharpe Screw Machine Turret Lathe No. 711-165-122 Knee Tool 1" Shank

  • Flint, Michigan, United States
  • Jun 9th
Brown & Sharpe Screw Machine Turret Lathe No. 711-62-122 Slide Tool 1" Shank

Brown & Sharpe Screw Machine Turret Lathe No. 711-62-122 Slide Tool 1" Shank

  • Flint, Michigan, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies