Desco 13954 Statshield Foil 4mil Moister Barrier Bag Metal-in 16x18 Pack Of 100

US $99.99

  • Mentor, Ohio, United States
  • Jan 31st
 16"x18" Meets JEDEC-STD-033B and ANSI/ESD S20.20 Tough, high puncture resistance Meets flex durability F392-93 condition E test WVTR <0.0003 grams per ASTM F1249-90 Thickness: Nominal .0040" (.1016mm) ±10% Excellent choice for moisture barrier protection Ideal for vacuum packaging and nitrogen flushing Printed with ESD Warning Symbol And manufacturer name, date and lot code for traceability Meets ANSI/ESD S541 Lead-free RoHS compliant - Click for RoHS Compliancy Statement To see Desco’s Statshield Moisture Barrier bags being used at a workstation, click here Made in the United States of America This item is made and stocked in Canton, MA. Estimated Shipping Weight: 7.71 Pounds Use ESD Shielding bags to follow ANSI/ESD S20.20 fundamental ESD control principle: "Transportation of ESDS items outside an Electrostatic Protected Area requires enclosure in static protective materials; low charging and static discharge shielding materials are recommended." "...it is important to take possible temperature exposure into account when shipping electronic parts. It is particularly important to consider what happens to the interior of a package if the environment has high humidity. If the temperature varies across the dew point of the established interior environment of the package, condensation may occur. The interior of a package should either contain desiccant or the air should be evacuated from the package during the sealing process. The package itself should have a low WVTR." (ESD Handbook TR20.20 section 5.4.3.2.2) ANSI/ESD S541 Section 6.2 Outside an EPA: “Transportation of sensitive products outside of an EPA shall require packaging that provides: 1. Low charge generation 2. Dissipative or conductive materials for intimate contact 3. A structure that provides electrostatic discharge shielding.”   Desco’s bags are recyclable Mixed unsortable plastic scrap shall contain assorted plastics of multiple grades that are co-extruded, bonded or laminated together which are unsortable into individual grades.   Desco ESD Bags Are Generally Reusable For best results, bag inventory should be continually replenished. It is recommended that standard packs of bags should be stored in its original packaging in a climate controlled environment where the temperature ranges from 45 degrees F to 70 degrees F and relative humidity is 50%.  Bags should not be stored in ultraviolet sunlight, moisture, or heat because the aluminum shielding layer could oxidize if exposed to these conditions. We have no reports of degradation of ESD control properties of bags sealed in original standard pack packaging.  Desco's Limited Warranty expressly warrants that for a period of one (1) year from the date of purchase, Desco products will be free of defects in material (parts) and workmanship (labor). Before using and after one year from purchase date, users shall determine the suitability of the Statshield ESD Bags for their intended use.  Users assume all risk and liability whatsoever in connection therewith.  Mishandling or improper storage may render an ESD Bag unusable to perform its function.  ESD Bags that are ripped, torn, or scratched should be discarded. From ANSI/ESD S20.20 section 6.2.4.2. Packaging Guidance: "The objective of ESD protective packaging is to prevent a direct electrostatic discharge to the ESDS item contained within and allow for dissipation of charge from the exterior surface. In addition, the packaging should minimize charging of the ESDS item in response to an external electrostatic field and triboelectrification. They may also lose static shielding properties by crumpling, puncturing and folding."  Some end users reuse a Statshield® Transparent Metal In ESD Shielding Bag up to six times and then discard. Ideally, the user should test, auditing some percentage of the re-used ESD Bags using test procedures outlined in ANSI/ESD-S11.11 Surface Resistivity Standard, ANSI/ESD-S11.12 Volume Resistance Measurements of Static Dissipative Planar Materials, and Shielding Materials ANIS/ESD S11.31. Desco's only obligation shall be to replace such quantity of the product proved to be defective. See full Limited Warranty information.   “The Organization shall define ESD protective packaging for all ESD susceptible item material movement within Protected Areas, between job sites and field service operations.”  See ANSI/ESD S20.20 section 6.2.4.1. Packaging Requirements.   “ESD susceptible items shall be packaged in ESD protective packaging while not in a Protected Area.”  See ANSI/ESD S20.20 section 6.2.3.1.   Statshield® bags are packaged 100 per package in an oversized shielding bag rather than a cardboard box. Therefore, our bags are not exposed to water vapors that will degrade the metallized shielding layer. Our bags have an additional layer of barrier protection because of our packaging. .
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand DESCO
MPN 13954
Model 13954

Directions

Similar products from Anti Static Shielding Bags

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies