dayton heat pump for sale, brand-new and used.

Dayton Indoor Heat pump unit, Blower/ Coil & or Electric Warm Air Furnace, 3UH37 Air Handler, 35 inches x 14 inches x 22 inches THIS UNIT IS THE CABINET AND FAN ONLY! HEAT STRIPS NOT INCLUDED! *This is a new unit, with minor shipping damage on top of unit, (see photos)

New no box Never been used pump for a pressure/power washer made by Hawk, sold by Graingers New part number 5ZNT5 It is 3,000 PSI and 7.3 GPM. These sell for over $751.00 from the manufacturer Note: Ships with some oil but buyer’s responsibility to top of oil with recommended non foaming 20W40 oil before use as reservo

Used circulator pump off of residential hot water heat system. Been sitting around for 5 years since I got new boiler. Only used it 3 years.

Up for auction is an Emerson blue heat pump thermostat.  This thermostat is missing its back wall plate but is in otherwise new condition.  The slot is sold as is with no returns accepted if you have any questions feel free to contact me prior to

Server Products Nacho Cheese warmer, sure this could be used for any type sauce. Works great, heats up right away, pump works great, no dents, Light bulb needs replace, does not light up and the cord has couple places where the black cover was nicked, there are no exposed bare wires, wires still have cover, just the black insulation was nicked, (was covered with tape, but I removed to show). All in great, lightly used condition .

BUYER BEWARE There is a fraudulent compressor company here on the internet. They are claiming to use 5 of the top NAME BRAND air end pumps on their product. These white colored units are listed at a cheap price and are listing a name brand pump in the ad to sell it.

www.meci.com

YOU ARE BIDDING ON CONDENSING UNIT , HEAT PUMP , 13.0 COOLING SEER , 4.0 COOLING TON , 46,500 HEATING BTUH , 8.0 HSPF NOMINAL HEATING , 208/230 VOLT , 60 HZ , 1 PHASE ,3/8" LIQUID LINE , 7/8" SUCTION LINE SIZE ,MIN CIRCUIT AMPS 31.1 , MAX FUSE SIZE IS 50 AMP , IT IS 38" HIGH X 43" WIDE X 32" DEEP . UNIT IS NEW , SOME SCRATCHES MODEL # 6YU16 MFR : DAYTON LOCATION : W2STOR

New old stock PP217 Pump Adjustment Kit Parts included: M27694: Adjusting Screw M22997: Plug M8940: Ball M10993-1: Spring DESA: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, and TSC: (PP217, HA3020) PINNACLE: Pr

HEARTLAND COOKERS and SMOKERS _____________________________________________________

SERVICE MANUAL AND OTHER RELATED ITEMS FROM 1984 MACK CF686F FIRE TRUCKVIN 1M1A139C8EM001598MILES 455456 CYLINDER TURBO DIESEL, EM6-285 MAXIDYNE, HIGH TORQUE RISE, TURBOCHARGED, SERIES CHARGE AIR COOLING, PISTING COOLING, OIL COLLER, 285 HORSEPOWERMACK 5 SPEED TRANSMISSION, MODEL TRL1076AIR BRAKES11R20 TIRES ON DAYTON RIMS5 MAN CAB, THREE INSIDE, TWO IN REAR, ONE RIGHT, ONE LEFT

Mi-T-M HSP-3504-3MGH Hot Water Direct Drive H 3500 PSI Pressure Washer Mi-T-M HSP-3504-3MGH HSP Series Hot Water Gasoline Direct Drive, 389cc Honda OHV Engine, 3500 PSI Pressure Washer Heat does not work engine and pump work great

This PP205 5/8" thick rotor kit (w/insert) is used on 55K btu and 200-215K btu heaters. Originally the part number was M22456-2, now it is a kit which includes the vanes and insert. Sometimes called an Air pump DESA: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, TSC: (PP205,HA3005, M22456-2)

>>>>>>>>>>>NEW-IN-BOX CONDENSER FAN MOTOR FOR OUTSIDE UNITS. 1/2HP, 1075RPM, 208-230VOLT, REVERSIBLE ROTATION. REPLACEMENT CAN BE INSTALLED ON A.C.