BUSINESS HOURS: 8:00 AM to 4:00 PM M-F Eastern time zone. ------------------------------ NEED IT FAST? CHOOSE EXPEDITED PRIORITY MAIL SHIPPING FOR JUST $2.00 FOR INDOOR USE ONLY! DEEP DISCOUNTS AVAILABLE for sign companies and neon shops. Contact me for details. WARNING! These are solid state neon transformers. They are designed to operate a neon sign only! They CANNOT be used for a Tesla coil, Jacob's ladder, O-zone generator or other "experiments" or "projects". They are intended to power a NEON SIGN ONLY, and they CANNOT be dimmed with external dimmer controls. Attempting to do any of this will destroy the unit and VOID THE WARRANTY! For those “electrical engineer geniuses” who think they know better and can “make it work”, PLEASE DO NOT BUY THIS ITEM! THIS UNIT IS A REPLACEMENT NEON SIGN TRANSFORMER / POWER SUPPLY FOR A CPI Advanced Model CPI-6-35 or CPI-6035. This is a NeonPro Model ME-120-6000-30. It is a suitable replacement for the CPI 6,000 models. This unit will power the same amount of neon as a CPI-6-35 or CPI-6035. It is rated at 30mA vs. 35mA for the CPI. So the sign will be virtually the same brightness. CPI states the OUTPUT on the label as Peak voltage. NeonPro states the label OUTPUT as RMS voltage. NeonPro indicates the Peak voltage in the model number. In this case, ME-120-6000-30. BRAND NEW GENUINE NeonPro Model ME-120-6000-30 with current date code, not "NOS" (new old stock). SPECIFICATIONS ARE LISTED BELOW. Please read my return policy details by clicking the "Shipping and payments" tab.OUTPUT: 6kV (6,000 volts) PEAK / 5kV (5,000 volts) RMS. THE OUTPUT IS SELF ADJUSTING FOR LOAD FROM 2kV TO 6kV. Complete specifications are listed below, but if you have ANY questions whatsoever, please contact me first before purchasing. ------------------------------ NOTICE! BEFORE BUYING: BE SURE THIS IS THE PROBLEM! There are many reasons why a neon sign may not work. A bad power supply is just one possibility. IF YOU DO NOT KNOW OR ARE UNSURE IF THE POWER SUPPLY IS THE PROBLEM, CONTACT A REPUTABLE NEON SHOP OR SIGN COMPANY WHO SERVICES NEON SIGNS FOR ASSISTANCE FIRST. ONCE YOU HAVE CONNECTED THIS POWER SUPPLY TO YOUR SIGN AND ATTEMPT TO USE IT, WHETHER IT FIXES YOUR SIGN OR NOT, YOU CANNOT RETURN IT FOR A REFUND. YOU CAN ONLY RETURN IT FOR A REFUND IF IT HAS NOT BEEN USED. (Fees apply to returned items. See my "Return Policy Details".) ALL POWER SUPPLIES THAT ARE RETURNED AS DEFECTIVE ARE TESTED. IF YOU RETURN A POWER SUPPLY AS BEING DEFECTIVE, BUT IT IS NOT DEFECTIVE, YOU WILL BE RESPONSIBLE FOR THE SHIPPING CHARGES TO RETURN IT TO YOU. A REFUND WILL NOT BE GIVEN IF THERE IS NOTHING WRONG WITH THE UNIT. THE WARRANTY COVERS REPLACEMENT ONLY, NOT REFUNDS. IF A POWER SUPPLY IS FOUND TO BE DEFECTIVE WE WILL GLADLY REPLACE IT. A REFUND WILL NOT BE GIVEN FOR A DEFECTIVE POWER SUPPLY. ------------------------------ WE STOCK THE FOLLOWING SELF-ADJUSTING SIZES: 3kV Self adjusting. May be used for 2kV to 3kV. 6kV Self adjusting. May be used for 2kV to 6kV including 4.5kV, 5kV, 5.5kV and 6kV. 9kV Self adjusting. May be used for 2kV to 9kV including 6.5kV, 7kV, 7.5kV, 8kV and 9kV. 12kV Self adjusting. May be used for 2kV to 12kV including 10kV, 10.5kV and 12kV. The 9kV and 12kV are available in flashing models. BRAND NEW WITH 2 YEAR WARRANTY (from date of manufacture like all power supply warranties) NeonPro Model: ME-120-6000-30 (REPLACEMENT FOR CPI-6-35 or CPI-6035) (Standard 120 volt input. 2,000 to 6,000 volt equivalent secondary output, 30 mA) UL listed and UL 2161 compliant. This is a commercial duty solid-state electronic transformer for indoor use. Self-adjusting up to a 6kV load (compares to a conventional core & coil 6,000 volt transformer). Includes integral sleeve silicone GTO-10 secondary leads (very flexible), on-off pull chain switch and instructions. SPECIFICATIONS: MODEL: Me-120-6000-30 INPUT: 120VAC 50/60Hz 0.5A POWER: 60W OUTPUT: Self-adjusting from 2kV to 6kV. Maximum 6kV PEAK / 5kV RMS 30 mA (5kV Output will be shown on the label) POWER FACTOR: PF>0.9,THD<45% WORKING FREQUENCY: 38-40KHz OVERLOAD PROTECTION: Yes OPEN CIRCUIT PROTECTION: Yes EARTH LEAKAGE PROTECTION: Yes IP RATING: Indoor type 7 INPUT CABLE LENGTH: 6.5 ft. INPUT PLUG: 3 prong grounded ON/OFF SWITCH: Yes, Pull chain OUTPUT CABLE LENGTH: 2.6 ft. WEIGHT: 1.32 lbs. OVERALL DIMENSIONS: 5-3/4" L x 2-5/8” W x 1-5/8” H. SEE ALL OUR LISTINGS FOR OTHER QUALITY NEON EQUIPMENT & SUPPLIES ____________________________________________________________________________ PLEASE READ THE "FINE PRINT" FEEDBACK POLICY: I will be happy to leave positive feedback for you once I have received positive feedback. My feedback history will confirm my reciprocation. SHIPPING: FREE SHIPPING DISCLAIMER: Shipping for this item is free to the United States and Puerto Rico only. Other countries are subject to a shipping fee as determined by the eBay Global shipping Program. RETURN POLICY: PLEASE READ OUR RETURN POLICY DETAILS. THEY ARE LOCATED ON THE “SHIPPING AND PAYMENTS” TAB, WHICH IS LOCATED DIRECTLY TO THE RIGHT OF THE “DESCRIPTION” TAB ABOVE. BY PURCHASING THIS ITEM YOU ACKNOWLEDGE YOUR ACCEPTANCE OF OUR RETURN POLICY. IF YOU DO NOT AGREE WITH OUR RETURN POLICY, DO NOT PURCHASE THIS ITEM! IF YOU HAVE ANY QUESTIONS REGARDING OUR RETURN POLICY CONTACT US BEFORE PURCHASING. PLEASE NOTE: FOR OUR PROTECTION WE ARE REQUIRED TO SHIP THE ITEM TO THE ADDRESS THAT APPEARS ON THE "PAYPAL TRANSACTION DETAILS" PAGE THAT IS GENERATED BY PAYPAL. IT MUST BE A CONFIRMED PAYPAL ADDRESS. IF IT IS NOT, YOUR MONEY WILL BE REFUNDED AND THE SALE CANCELLED. PLEASE ASK ANY QUESTIONS YOU HAVE BEFORE BIDDING / BUYING
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
