Cole Parmer Stir-pak 50002-02 Controller W Laboratory Mixer Motor 50002-30

US $1400

Natick, Massachusetts, United States
Jun 3rd

Open on mobile:
QR code

This is a listing for Cole Parmer STIR-PAK 50002-02 Controller Laboratory Mixer Motor 50002-30 (23-2300 R.P.M) What you will get: Cole Parmer STIR-PAK 50002-02 Controller Cole Parmer Laboratory Mixer Motor 50002-30 (23-2300 R.P.M) Bracket on the motor. Printout of the manual from the Cole Parmer Link below. Description: You will get a Cole Parmer STIR-PAK 50002-02 Controller and Cole Parmer Laboratory Mixer Motor 50002-30 (23-2300 R.P.M). You will need a Cole Parmer .3750" Mixer Shaft to use this. I tested this and it works fine. You will also need a stand. From the Cole Parmer Web Site: Cole-Parmer Stir-Pak speed controller, 115 VAC Solid-state controller offers precise speed control with a 100:1 adjustment range. A separate “forward/off/reverse” switch works independently from the speed control dial—allowing you to repeat mixer speed settings from one run to the next. Electronic control maintains speed regulation better than ±2%. Torque limiting provides greater system protection and reduced motor gear failure. An LED indicates when power is on. Remote controller is connected to the mixer head via a 6-ft, three-wire cord—protects electronics from hazardous spills or splashes. Controller measures 7"W x 3-3/16"H x 4-7/8"D. The 115 VAC model is UL-listed and cUL-listed and has a 6-ft cord with grounded plug. The 230 VAC model has an 8-ft cord with modular line cord and IEC320/CEE22 connector. Cole-Parmer Stir-Pak high-speed, low-torque mixer head; 23-2300 rpm, 115 VAC These rugged mixer heads feature TENV, permanent magnet DC motor with permanently lubricated ball bearing construction. Choose from four models depending on your desired speed and torque ranges. The high-torque, low-speed models feature a JACOBS®-type chuck that accepts mixing shafts from 5/16" to 3/8" dia. The high-speed, low-torque models incorporate a hollow through-shaft and a precision hand-tightened collet; collet accepts 3/8" dia mixing shafts. The design lets you quickly position the mixing propeller at any depth within the container without moving the mixer head. The design also minimizes shaft “wobble” common at higher speeds and with longer shaft lengths. All mixer heads are equipped with an integral adjustable-tilt mounting assembly that permits the rotation of the mixer head from 0° to 30° for proper placement of shaft and propeller. Heads measure approximately 11-1/2"H x 3-5/8" dia. Specifications Product Type Mixer Chuck Adjustable Min speed (rpm) 23 Max speed (rpm) 2300 Motor (hp) 0.1 Max torque (in-oz) 45 Power (VAC) 115 Power (Hz) 50/60 Documentation: Manual for the Cole Parmer 50002-30 Mixer Motor and 50002-02 Controller