+ Post new Ad
BT 40 TOOL HOLDER 1 " - 4 " GAGE - PARLEC - 982C, US $40.00 – Picture 0
BT 40 TOOL HOLDER 1 " - 4 " GAGE - PARLEC - 982C, US $40.00 – Picture 0

Bt 40 Tool Holder 1 " - 4 " Gage - Parlec - 982c

US $40.00

  • Bedford, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
 BT 40 TOOL HOLDER   1 " 4 " GAGE PARLEC  You are buying a used but good tool holder. This tool holder has a BT 40 shank, and it holds a 1 " tool and has a 4 " gage length. It is made by Parlec. Buy with confidence knowing that we inspect, clean and test (when possible) most tools prior to each auction. POLICIES • All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. • It is the buyer's responsibility to understand the terms of the sale, the nature of equipment offered and buy accordingly. • The buyer must notify us of a problem within 3 days of receiving item(s). • If you are not happy with your purchase, we will gladly refund your money, minus shipping costs. • If the item is not as described, you will receive a full refund. SHIPPING We don't up - price our shipping and we don't add handling costs. If we can save you on shipping, we will combine or use a different carrier to do so. If we ship your item for a cheaper price, we will refund the difference to you. Shipping will be via UPS unless otherwise specified. UPS will send an email containing a tracking number once we ship your item. For UPS, P.O. BOXES are never accepted. We ship items to physical addresses only.  We ship to the address registered with PayPal. If that address is incorrect, it is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks, however, items purchased on Fridays may not be shipped until the following Monday.  International items may take longer.   CONTACT US JOSEPH D'AMICO 440-773-9477 CLEVELAND, OHIO Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “USED”

Directions

Similar products from BT Tool Holders

Jacobs Chuck 0080208 BT 40 Milling Chuck 20mm Diameter with 100mm Projection e

Jacobs Chuck 0080208 BT 40 Milling Chuck 20mm Diameter with 100mm Projection e

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0083645 NMTB 30 End Mill Tool Holder 8mm Dia 40mm Projection

Jacobs Chuck 0083645 NMTB 30 End Mill Tool Holder 8mm Dia 40mm Projection

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0085209 CAT V 40 Shell/ Face Mill Tool Holder 1-1/4" Dia 6"Proj

Jacobs Chuck 0085209 CAT V 40 Shell/ Face Mill Tool Holder 1-1/4" Dia 6"Proj

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0066120 BT 50 Rigid Tap Holder 2 M8 - M24 196.8mm Projection

Jacobs Chuck 0066120 BT 50 Rigid Tap Holder 2 M8 - M24 196.8mm Projection

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0083563 SK 30 End Mill Tool Holder 12mm Dia W/ 50mm Projection

Jacobs Chuck 0083563 SK 30 End Mill Tool Holder 12mm Dia W/ 50mm Projection

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0085138 BT 40 Shell Face Mill Tool Holder 40mm Dia 60mm Projection

Jacobs Chuck 0085138 BT 40 Shell Face Mill Tool Holder 40mm Dia 60mm Projection

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065292 ANSI TAP Clutch Collet 1 with 1/4" Capacity 1/4" 1/5"Drive

Jacobs Chuck 0065292 ANSI TAP Clutch Collet 1 with 1/4" Capacity 1/4" 1/5"Drive

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0083579 SK 50 End Mill Tool Holder 25mm Dia W/ 80mm Projection

Jacobs Chuck 0083579 SK 50 End Mill Tool Holder 25mm Dia W/ 80mm Projection

  • Wichita, Kansas, United States
  • Jan 30th
Lyndex BT40 End Mill Tool Holder 1-1/4" Bridgeport mill lathe kennametal R#0037

Lyndex BT40 End Mill Tool Holder 1-1/4" Bridgeport mill lathe kennametal R#0037

  • Dayton, Ohio, United States
  • Jan 30th
BT 40 TOOL HOLDER - FACE MILL HOLDER 1 & 1/4 "- 1 & 5/8 " GAGE - ACCUPRO - 982G

BT 40 TOOL HOLDER - FACE MILL HOLDER 1 & 1/4 "- 1 & 5/8 " GAGE - ACCUPRO - 982G

  • Bedford, Ohio, United States
  • Jan 30th
BT 40 TOOL HOLDER 1 & 1/4 " - 3 & 1/4 " GAGE - 982D

BT 40 TOOL HOLDER 1 & 1/4 " - 3 & 1/4 " GAGE - 982D

  • Bedford, Ohio, United States
  • Jan 30th
BT 40 TOOL HOLDER 1 & 1/4 " - 4 " GAGE - 982E

BT 40 TOOL HOLDER 1 & 1/4 " - 4 " GAGE - 982E

  • Bedford, Ohio, United States
  • Jan 30th
BT 40 TOOL HOLDER 7/8 " - 3 & 1/2 " GAGE - NIKKEN - 982B

BT 40 TOOL HOLDER 7/8 " - 3 & 1/2 " GAGE - NIKKEN - 982B

  • Bedford, Ohio, United States
  • Jan 30th
BT 40 TOOL HOLDER 7/8 " - 3 & 1/2 " GAGE - 982A

BT 40 TOOL HOLDER 7/8 " - 3 & 1/2 " GAGE - 982A

  • Bedford, Ohio, United States
  • Jan 30th
Erickson BT40 with Kennametal KDK10 KLS15 shank tool shell mill adaptor

Erickson BT40 with Kennametal KDK10 KLS15 shank tool shell mill adaptor

  • Downey, California, United States
  • Jan 30th
TOOLING RETENTION KNOBS / CNC TOOL HOLDERS, 5/8-11 ~NEW~SURPLUS~

TOOLING RETENTION KNOBS / CNC TOOL HOLDERS, 5/8-11 ~NEW~SURPLUS~

  • Orwell, Ohio, United States
  • Jan 30th
COMMAND TOOL RETENTION KNOBS; QTY: 15, P/N: RB4E-0101 ~NEW~SURPLUS~

COMMAND TOOL RETENTION KNOBS; QTY: 15, P/N: RB4E-0101 ~NEW~SURPLUS~

  • Orwell, Ohio, United States
  • Jan 30th
TOOLING RETENTION KNOBS / CNC TOOL HOLDERS / STUDS, 5/8-11 ~NEW~SURPLUS~

TOOLING RETENTION KNOBS / CNC TOOL HOLDERS / STUDS, 5/8-11 ~NEW~SURPLUS~

  • Orwell, Ohio, United States
  • Jan 30th
New 1PCS M12 BT30 ER11 70L Collet Chuck Holder ER11 Toolholder CNC Milling&Lathe

New 1PCS M12 BT30 ER11 70L Collet Chuck Holder ER11 Toolholder CNC Milling&Lathe

  • hongkong, Hong Kong
  • Jan 30th
New 1PCS M12 BT30 ER16 70L Collet Chuck Holder ER11 Toolholder CNC Milling&Lathe

New 1PCS M12 BT30 ER16 70L Collet Chuck Holder ER11 Toolholder CNC Milling&Lathe

  • hongkong, Hong Kong
  • Jan 30th

People who viewed this item also vieved

cat 40 tool

cat 40 tool

  • Mokena, Illinois, United States
  • Mar 5th
UNIVERSAL ENGINEERING 2.5" x 6" SOFT NOSE BLANK w/ CAT40 SHANK - #5010539

UNIVERSAL ENGINEERING 2.5" x 6" SOFT NOSE BLANK w/ CAT40 SHANK - #5010539

  • Covina, California, United States
  • Mar 5th
Tool-Flo A10-FLER2, Internal Threading & Grooving Holder / Boring Bar - USED

Tool-Flo A10-FLER2, Internal Threading & Grooving Holder / Boring Bar - USED

  • Chillicothe, Missouri, United States
  • Mar 9th
2" Sandvik Silent Tools A570-4C D32 17-40 Dampened Boring Bar 17.165"OAL (O 195)

2" Sandvik Silent Tools A570-4C D32 17-40 Dampened Boring Bar 17.165"OAL (O 195)

  • Dallas, Texas, United States
  • Mar 9th
TOOLHOLDER INDEXABLE RH COOLANT THRU MVJNR-12-3D HOLDS VNMG-33_ LMT NEW $46.00

TOOLHOLDER INDEXABLE RH COOLANT THRU MVJNR-12-3D HOLDS VNMG-33_ LMT NEW $46.00

  • North Tonawanda, New York, United States
  • Mar 11th
USED KENNAMETAL 3/4"-SHANK DDJNL-124B TURNING TOOL DNMG-432

USED KENNAMETAL 3/4"-SHANK DDJNL-124B TURNING TOOL DNMG-432

  • Fairfield, Iowa, United States
  • Mar 11th
2" DIAMETER SHANK NO.4 MORSE TAPER ADAPTER SLEEVE #4MT

2" DIAMETER SHANK NO.4 MORSE TAPER ADAPTER SLEEVE #4MT

  • Cleveland, Ohio, United States
  • Mar 12th
NEW UNUSED MT2 JT33 MORSE TAPER 2 DRILL CHUCK ARBOR 4 LATHE MACHINIST TOOL

NEW UNUSED MT2 JT33 MORSE TAPER 2 DRILL CHUCK ARBOR 4 LATHE MACHINIST TOOL

  • United States
  • Mar 25th
No Name Keyed Bushing SDS-7/8 SDS78 3/16X3/32 KWY 7/8" Bore New

No Name Keyed Bushing SDS-7/8 SDS78 3/16X3/32 KWY 7/8" Bore New

  • Clover, South Carolina, United States
  • Mar 27th
TAPER-LOCK 3-1/2 BUSHING 3535 105183

TAPER-LOCK 3-1/2 BUSHING 3535 105183

  • Sunman, Indiana, United States
  • Mar 27th
Dorian Tool ER40 Alloy Steel Ultra Precision Collet, 0.984" - 1.024" Hole Size

Dorian Tool ER40 Alloy Steel Ultra Precision Collet, 0.984" - 1.024" Hole Size

  • USA, United States
  • May 24th
Dorian Tool ER32 Alloy Steel Ultra Precision Collet, 0.586" - 0.625" Hole Size

Dorian Tool ER32 Alloy Steel Ultra Precision Collet, 0.586" - 0.625" Hole Size

  • USA, United States
  • May 24th
WAHLSTROM KEYLESS DRILL CHUCK #2 MT cap. 1/64 - 3/8 machinist tools *J

WAHLSTROM KEYLESS DRILL CHUCK #2 MT cap. 1/64 - 3/8 machinist tools *J

  • Thomaston, Connecticut, United States
  • Jun 1st
#2 SCULLY JONES 1/2 TAP QUICK CHANGE 5/16 TAP #2 COLLET LOC2360

#2 SCULLY JONES 1/2 TAP QUICK CHANGE 5/16 TAP #2 COLLET LOC2360

  • Sidney, Ohio, United States
  • Jun 2nd
KDK 101 Style Turning & Facing Holder Used Complete With Set Screws

KDK 101 Style Turning & Facing Holder Used Complete With Set Screws

  • San Diego, California, United States
  • Jun 2nd
MILWAUKEE ELECTRIC RIGHT ANGLE 1/2" DRILL W/CHUCK KEY 1107-1

MILWAUKEE ELECTRIC RIGHT ANGLE 1/2" DRILL W/CHUCK KEY 1107-1

  • Lakeland, Florida, United States
  • Jun 2nd
Sunnen Hone CR 3100 Connecting Rod Mandrel with New Stone, Wedge, Brass Shoes

Sunnen Hone CR 3100 Connecting Rod Mandrel with New Stone, Wedge, Brass Shoes

  • Scottsdale, Arizona, United States
  • Jun 9th
Lenox 1779804 5L Hole Saw Arbor Mandrel Fits 9/16" to 1-3/16" USA

Lenox 1779804 5L Hole Saw Arbor Mandrel Fits 9/16" to 1-3/16" USA

  • Elmer, New Jersey, United States
  • Jun 9th
TAPMATIC REVERSIBLE TAPPING ATTACHMENT N/C-R NEW OLD STOCK

TAPMATIC REVERSIBLE TAPPING ATTACHMENT N/C-R NEW OLD STOCK

  • Belleville, New Jersey, United States
  • Jun 24th
3.7kW brushed DC spindle motor and drive

3.7kW brushed DC spindle motor and drive

  • Amherst, New Hampshire, United States
  • Oct 19th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies