Atlas Metals Rm-1 Drop-in Refrigerated Single Cold Pan -equal To The Wcm-1

US $2600

Cobbs Creek, Virginia, United States
Jun 12th

Open on mobile:
QR code

Excellent condition. No frame rust. 134A refrigerant. Tested to -2 degrees (F). Came from a university food service operation that was remodeled with all new equipment, so these came out of an on-going operation. Quiet running and quick to respond to the digital thermostat where desired temp can be set and temp tolerance can be set. Two include pan supports, two do not. Please study pictures closely. THESE SELL FOR $2000+ each. SAVE SOME MONEY AND PURCHASE QUALITY USED EQUIPMENT FROM US!! Call me with any questions... Jerry 804-725-3889. Thank you for looking! The Atlas Metal industries RM series refrigerated cold pan eliminates the mess and expense of ice in your cold food displays. In addition, this cold pan, 9" deep, has copper tubing wrapped around its side walls to meet the strictest health department codes. The drop-in pan can be installed in virtually any counter and can be provided as fully self-contained - just plug it in and turn it on - or remote, where there's a need to locate the compressor at a different location. The pan is fully insulated for maximum efficiency and energy savings, and is provided with a factory applied gasket so that it can be installed in the finest wood fixtures without marring the counter top. The pan is constructed of stainless steel and is provided with a 3/4" stainless steel drain. The cold pan accommodates standard 12" x 20" pans, perfect for any cold food serving application. Specifications: **TOP: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring of the counter top. Embossed mounting lugs are provided along the inner surface, 3" down from the top, to hold the pan rails and a full set of removable separator channels in place. **LINER: The inner liner shall be 18 gauge, type 304 stainless steel with a 3" recessed top, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4" radius. The liner has copper tubing firmly soldered to the top 3" on all sides. A 3/4 dia. drain with strainer, 4" PVC nipple, and valve is provided. INSULATION: The pan is fully insulated with high density polystyrene, 1" thick on all sides, 2" thick on the bottom and enclosed with a 22 gauge galvanized steel outer case. **REFRIGERATION SYSTEM: The compressor housing shall be fabricated from 14 gauge galvanized and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and digital electronic thermostat/thermometer. The system is fully charged with CFC free refrigerant and ready to operate. NOTE: Proper ventilation must be provided in the counter. **ELECTRICAL: The unit will be wired for 15 amps., 120 volt, single phase operation with an on/off switch and pilot light. A 6' long, 3-wire cord and plug (NEMA 5-15P) will be provided. This Atlas Metal refrigerated drop-in pan can be installed quickly and easily in any n virtually any counter. It comes ready to use, just plug it in and turn it on. It's fully insulated to keeps food cold and save money on energy costs. It holds 12" x 20" pans and is ideal for any cold food. Model #: WCM-1 Constructed of 18 gauge, 304 stainless steel Die stamped with raised perimeter bead 18 Gauge, 304 stainless steel fully welded liner Copper tubing soldered to liner 3/4" drain with strainer, 4" PVC nipple, and valve included Insulated with high density polystyrene Self-contained condensing unit included Fully charged with CFC refrigerant 2.4 amps, 120 volts, 1/5 HP, 6 ft. cord with plug (NEMA-5-15P) Factory applied gasket for easy installation and seals units to the counter top Accommodates standard 12" x 20" pans 1-Year Parts & Labor Warranty 20 Month Warranty on Refrigeration NSF Certified; UL Recognized Pan Size: 19-7/8" x 11-3/4" x 4-5/8" Counter Cut-Out Required: 22-1/4" x 14-1/4" Length: 13-3/4" Width: 18" Height: 3-7/8" Ship Weight: 116 lbs. Although every effort has been made to photograph and describe this item accurately and completely, it is being sold "As Is" with no warranties expressed or implied. If it's not in the picture, it doesn't come with it. Please ask for additional pictures if needed. This is listed as local pick up only and each will be demonstrated on pick up. The items weigh approximately 90 lbs each and crated would be approximately 120 lbs. and would measure about 26" x 18" x 30". All four will fit onto one pallet and if interested in all, contact me and we can work out crating and freight quotes.