Astro-Med Dash 10 Chart Recorder, US $150.00 – Picture 0

Astro-Med Dash 10 Chart Recorder, US $150.00 – Picture 1

Astro-Med Dash 10 Chart Recorder, US $150.00 – Picture 2

Astro-Med Dash 10 Chart Recorder, US $150.00 – Picture 3

Astro-Med Dash 10 Chart Recorder, US $150.00 – Picture 4

Astro-Med Dash 10 Chart Recorder, US $150.00 – Picture 5

Astro-Med Dash 10 Chart Recorder, US $150.00 – Picture 6

Astro-Med Dash 10 Chart Recorder, US $150.00 – Picture 7

Astro-Med Dash 10 Chart Recorder, US $150.00 – Picture 8

Astro-Med Dash 10 Chart Recorder, US $150.00 – Picture 9

Astro-Med Dash 10 Chart Recorder, US $150.00 – Picture 10

Astro-Med Dash 10 Chart Recorder, US $150.00 – Picture 11

Astro-med Dash 10 Chart Recorder

US $150.00

Albuquerque, New Mexico, United States
Mar 4th

Open on mobile:
QR code

ITEM DESCRIPTION: Used, powers up - not fully tested. The paper feed roller has sticky residue (partially melted?) and may need to be replaced. Battery needs to be replaced. Selling as-is. (Please Note: This item is used and may have marks, scratches, small dents, scuffs or other cosmetic defects as to be expected from a used item. Please see photos.) ACCESSORIES: None. No manual, cables, or other accessories. GENERAL INFORMATION & SPECIFICATIONS: The Astro-Med Dash 10 thermal Chart Recorder is used for recording 10 to 30 waveform channels. Its internal battery power gives you true portability, allowing you to pick it up and carry it anywhere. You get 11-inch wide, 300 dot per inch "laser quality" charts. You can view waveforms in real time on a bright, high response vacuum fluorescent (VF) monitor while recording or during setups. The Astro-Med Dash 10 allows you to input full scale signals from 50 mV to 500 V peak (250 V RMMS) at frequencies to 25 kHz without the need for external signal conditioners. You can capture up to 512 kSamples of data per channel to the huge internal RAM memory for up to 30 channels simultaneously. Also, the 1.44 MByte DOS compatible floppy drive makes recorder setups, data storage and software upgrades quick and easy. Specifications: Input Type Single-ended isolated User Input Connector Guarded Binding Posts Input Range 50 mVfs to 500 Vfs Input Coupling DC Input Impedance 1 MW Input Isolation 1500 VACrms for 60 seconds, channel to channel, channel to chassis Maximum Input 250 Vrms, 500 VDC, 500 Vpeak CMR (IMR) Greater than 95 dB @ 60 Hz Common Mode Voltage 250 Vrms Frequency Response -1 dB at 12 kHz -2 dB at 18 kHz -3 dB at 22 kHz A/D Sample Rate 200 kHz filer disabled Filter Type 2 pole 12 dB/octave Chart Speed Accuracy ±2% Zero Suppression Range ±500 V or ±5 V on mV setting Zero Suppression Accuracy ±2% of zero suppression setting Zero Position Accuracy ±0.2% Timer Speeds 0.01 to 0.09 (0.01 second increments) 0.1 to 0.9 (0.1 second increments) 1.0 to 9.0 (1.0 second increments) 10.0 to 60.0 (5.0 second increments) Internal Event Markers 10 interchannel plus 1 system Internal Annotation Buffers 30 128-character buffers 1 28-character system log buffer 1 128-character on-demand buffer Host Interface RS-232, Xon/Xoff or hardware; GPIB standard Some Dash 10 models may include Data Capture Memory: 6 Megasamples (opt. 10 chnls) Stacked Captures: 2 - 8 captures Sample Rates 250 kHz, 125 kHz, 50 kHz, 25 kHz, 10 kHz, 5 kHz, 2.5 kHz, 1 kHz, 500 Hz, 250 Hz, 100 Hz, 50 Hz, 25 Hz, 10 Hz, 5 Hz Weight 32 lbs., 36 lbs. with battery pack MANUFACTURER INFORMATION LINKS: Powered by SixBit's eCommerce Solution

“Used, powers up - not fully tested. The paper feed roller has sticky residue (partially melted?) and may need to be replaced. Battery needs to be replaced. Selling as-is.”

Brand	Astro-Med
Model	Dash 10