Alphalab Model Svm2 Static Electricity High Impedance Volt Meter

US $199.00

Du Bois, Pennsylvania, United States
Jun 9th

Open on mobile:
QR code

Note that this device is not suitable for long-term automated measurements. An optional output jack The Surface DC Volt Meter Model SVM2 has a range of 0 to +/- 29.999 kV (29000 Volts) with a resolution of 0.001 kV (1 Volt) at 1". It has an accuracy of +/- 2% of reading and a capacitance (to ground) of 3 nF. If used to sense charge, the SVM2 has a sensitivity of 3.3 kV/nC and a drift of < 0.001 kV/10 seconds. The meter has a leakage half-life of > 10 hours and an alarm range of .010 kV - 20 kV/mute. The sample speed is 0.0005 sec. with a > 98% response for > 0.015 sec. pulse. The Surface DC Voltmeter Model SVM2 has an auto-shutoff feature and can operate in temperatures ranging from -1 C to 43 C (30В°F to 110В°F) with 0-85% RH. It weighs 160 g (5.5 oz) and is powered by a 9 Volt Alkaline battery (~30 hour life). The Surface DC Voltmeter Model SVM2 by AlphaLab, Inc. is an electrostatic meter that allows for contactless measurement of static electricity. It is capable of measuring voltage on conductive surfaces and determining the charge density on insulators. The SVM2 has a peak positive and negative hold and a user-settable fast alarm. It boasts a high resolution of 1 volt on a 30K volt range. The SVM2 is a handheld meter used for the measurement of static charge magnitude and polarity on objects or surfaces. It is held 1вЂќ (25 mm) from the test surface and can detect as little as a 1 volt charge within its full range of +29,999 to -29,999 volts. The meter captures and stores the highest positive and negative signals experienced since the last reset, which can be displayed at any time. Along with a user-settable alarm, this meter can measure the amount of charge or voltage on surfaces, the location, strength, and polarity of all static sources, air ionization levels, DC electric field strength, the conductivity or ohms per square of surfaces, attractive/repulsive force between charged surfaces, and voltage differential through the thickness of an insulating sheet or film.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	AlphaLab, Inc.
MPN	SVM2
Model	Surface DC Voltmeter Model SVM2
Country of Manufacture	United States