+ Post new Ad
ACME SF-64-34 Slip-Fixed Renewable Drill Bushings 31/64 x 1 x 2-1/8" Lot of 4, US $26.95 – Picture 0
ACME SF-64-34 Slip-Fixed Renewable Drill Bushings 31/64 x 1 x 2-1/8" Lot of 4, US $26.95 – Picture 1
ACME SF-64-34 Slip-Fixed Renewable Drill Bushings 31/64 x 1 x 2-1/8" Lot of 4, US $26.95 – Picture 0
ACME SF-64-34 Slip-Fixed Renewable Drill Bushings 31/64 x 1 x 2-1/8" Lot of 4, US $26.95 – Picture 1

Acme Sf-64-34 Slip-fixed Renewable Drill Bushings 31/64 X 1 X 2-1/8" Lot Of 4

US $26.95

  • Denver, Colorado, United States
  • Mar 9th
Open on mobile:
QR code
   Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.   IF YOU HAVE QUESTIONS CALL 1-800-748-1945 PAYPAL PREFERRED - OR- PAY BY PHONE WITH Please do not leave negative or neutral feedback or low 1&2 DSR ratings. We always take care of problems to the best of our ability. Call or e-mail us! Your 100% satisfaction is our goal    MADE IN USA DESCRIPTION      New Old Stock ANSI and ACME  SF-64-34 Slip-Fixed  Renewable Drill Bushings 31/64" x 1" x 2-1/8" Long Lot of 4  Inside Diameter (Drill Size); 31/64" Outside Diameter; 1" Overall Length from Under Head; 2-1/8" Head Thickness; 7/16"     The "Two-in-One" Bushing: Fixed mode and slip position options on one knurled head! — Flexibility lowers your inventory costs. Knurled head for easier handling — just turn and lift. Used with liner, permanently pressed into drill ji.g Fixed mode for runs longer than life of bushing. Held in place by lock screw or clamp which fits a milled recess in the head. Slip mode for multiple operations in the same holes (such as drilling followed by reaming) — without disturbing the work piece. O.D. has a slip fit tolerance for easy insertion or removal from the liner. All slip fit bushings are lapped, honed, or ground in the I.D. Bushings with I.D.'s of 1/8" to 1" are concentric within .0003" T.I.R to the O.D. Other I.D. sizes are held within .0005" T.I.R.
“New Old Stock. May have light surface rust. Not in original package. New, Never Used.”
Manufacturer Jergens / Acme
Model Slip-Fixed Drill Bushings
Country/Region of Manufacture United States
MPN SF-64-34

Directions

Similar products from Sleeves

ACME SF-64-12 Slip-Fixed Renewable Drill Bushings 35/64" x 1" x 3/4" Lot of 6

ACME SF-64-12 Slip-Fixed Renewable Drill Bushings 35/64" x 1" x 3/4" Lot of 6

  • Denver, Colorado, United States
  • Mar 9th
ACME SF-64-12 Slip-Fixed Renewable Drill Bushings 39/64" x 1" x 3/4" Lot of 4

ACME SF-64-12 Slip-Fixed Renewable Drill Bushings 39/64" x 1" x 3/4" Lot of 4

  • Denver, Colorado, United States
  • Mar 9th
ACME SF-64-16 Slip-Fixed Renewable Drill Bushings 1/2" x 1" x 1" Lot of 5 USA

ACME SF-64-16 Slip-Fixed Renewable Drill Bushings 1/2" x 1" x 1" Lot of 5 USA

  • Denver, Colorado, United States
  • Mar 9th
ACME SF-64-16 Slip-Fixed Renewable Drill Bushings 31/64 x 1 x 1" Lot of 7 USA

ACME SF-64-16 Slip-Fixed Renewable Drill Bushings 31/64 x 1 x 1" Lot of 7 USA

  • Denver, Colorado, United States
  • Mar 9th
ACME SF-64-16 Slip-Fixed Renewable Drill Bushings 35/64" x 1" x 1" Lot of 5 USA

ACME SF-64-16 Slip-Fixed Renewable Drill Bushings 35/64" x 1" x 1" Lot of 5 USA

  • Denver, Colorado, United States
  • Mar 9th
ACME SF-64-22 Slip-Fixed Renewable Drill Bushings 31/64 x 1 x 1-3/8 Lot of 4 USA

ACME SF-64-22 Slip-Fixed Renewable Drill Bushings 31/64 x 1 x 1-3/8 Lot of 4 USA

  • Denver, Colorado, United States
  • Mar 9th
ACME SF-64-28 Slip-Fixed Renewable Drill Bushings 1/2" x 1" x 1-3/4" Lot of 4

ACME SF-64-28 Slip-Fixed Renewable Drill Bushings 1/2" x 1" x 1-3/4" Lot of 4

  • Denver, Colorado, United States
  • Mar 9th
ACME SF-64-28 Slip-Fixed Renewable Drill Bushings 31/64 x 1 x 1-3/4" Lot of 3

ACME SF-64-28 Slip-Fixed Renewable Drill Bushings 31/64 x 1 x 1-3/4" Lot of 3

  • Denver, Colorado, United States
  • Mar 9th
ACME SF-64-34 Slip-Fixed Renewable Drill Bushings 1/2 x 1 x 2-1/8" Lot of 2 USA

ACME SF-64-34 Slip-Fixed Renewable Drill Bushings 1/2 x 1 x 2-1/8" Lot of 2 USA

  • Denver, Colorado, United States
  • Mar 9th
ACME SF-64-34 Slip-Fixed Renewable Drill Bushings 1/2 x 1 x 2-1/8" Lot of 4 USA

ACME SF-64-34 Slip-Fixed Renewable Drill Bushings 1/2 x 1 x 2-1/8" Lot of 4 USA

  • Denver, Colorado, United States
  • Mar 9th
ACME SF-64-40 Slip-Fixed Renewable Drill Bushings 1/2 x 1 x 2-1/2" Lot of 5 USA

ACME SF-64-40 Slip-Fixed Renewable Drill Bushings 1/2 x 1 x 2-1/2" Lot of 5 USA

  • Denver, Colorado, United States
  • Mar 9th
FENNER TRANTORQUE 6980320X KEYLESS BUSHING, 1 1/4" SHAFT DIAM. 2" OD

FENNER TRANTORQUE 6980320X KEYLESS BUSHING, 1 1/4" SHAFT DIAM. 2" OD

  • Stockton, California, United States
  • Mar 9th
ORIGINAL ATLAS CRAFTSMAN 10/12" METAL LATHE LEAD SCREW BEARING BUSHING PT 10F-16

ORIGINAL ATLAS CRAFTSMAN 10/12" METAL LATHE LEAD SCREW BEARING BUSHING PT 10F-16

  • Gainesville, Georgia, United States
  • Mar 9th
Atlas 10" Metal Lathe 24 & 64 Tooth Change Gears & Bushing Sleeve Bolt Craftsman

Atlas 10" Metal Lathe 24 & 64 Tooth Change Gears & Bushing Sleeve Bolt Craftsman

  • Maple Valley, Washington, United States
  • Mar 9th
KOMATSU 154-50-11171 BUSHING HEAVY MACHINE BULLDOZER REPLACEMENT PART B492915

KOMATSU 154-50-11171 BUSHING HEAVY MACHINE BULLDOZER REPLACEMENT PART B492915

  • Buffalo, New York, United States
  • Mar 9th
FENNER TRANTORQUE 6202380 KEYLESS BUSHING, 1 7/16" SHAFT DIAM. 2 3/8" OD

FENNER TRANTORQUE 6202380 KEYLESS BUSHING, 1 7/16" SHAFT DIAM. 2 3/8" OD

  • Stockton, California, United States
  • Mar 8th
FENNER TRANTORQUE QC 63SH0100 KEYLESS BUSHING, 1" SHAFT DIAM. SH PULLEY TAPER

FENNER TRANTORQUE QC 63SH0100 KEYLESS BUSHING, 1" SHAFT DIAM. SH PULLEY TAPER

  • Stockton, California, United States
  • Mar 8th
GATES 78393315 BUSHING, NEW

GATES 78393315 BUSHING, NEW

  • Shreveport, Louisiana, United States
  • Mar 8th
TB WOODS F3716 BUSHING, NEW

TB WOODS F3716 BUSHING, NEW

  • Shreveport, Louisiana, United States
  • Mar 8th
FENNER TRANTORQUE QC 63SH0075 KEYLESS BUSHING, 3/4" SHAFT DIAM. SH PULLEY TAPER

FENNER TRANTORQUE QC 63SH0075 KEYLESS BUSHING, 3/4" SHAFT DIAM. SH PULLEY TAPER

  • Stockton, California, United States
  • Mar 8th

People who viewed this item also vieved

Carbaloy 3/4" Square Shank Indexable Insert Lathe Tool MSDNN 12-4

Carbaloy 3/4" Square Shank Indexable Insert Lathe Tool MSDNN 12-4

  • Johnson City, New York, United States
  • Jan 30th
Sandvik 5/8" Square Shank Indexable Insert Lathe Tool STGCR 10-3

Sandvik 5/8" Square Shank Indexable Insert Lathe Tool STGCR 10-3

  • Johnson City, New York, United States
  • Jan 30th
CAT40 ER40 V-Flange Collet Chuck Projc. Length 2.76'', Range: 1/8-1", #1601-0035

CAT40 ER40 V-Flange Collet Chuck Projc. Length 2.76'', Range: 1/8-1", #1601-0035

  • TORONTO, ONTARIO, Canada
  • Jan 30th
CME/HARVEST 1/2" KEY TYPE DRILL CHUCK W. CAT50 ARBOR CNC TOOLING--NEW

CME/HARVEST 1/2" KEY TYPE DRILL CHUCK W. CAT50 ARBOR CNC TOOLING--NEW

  • Madison Heights, Michigan, United States
  • Jan 30th
MANCHESTER Indexable Grooving Toolholder NJ 0 109522716 USA <1897>

MANCHESTER Indexable Grooving Toolholder NJ 0 109522716 USA <1897>

  • Saint Louis, Missouri, United States
  • Jan 30th
TAEGUTEC Indexable Turning Toolholder TVJNR 20-3D [609]

TAEGUTEC Indexable Turning Toolholder TVJNR 20-3D [609]

  • Saint Louis, Missouri, United States
  • Jan 30th
JACOBS 20N BALL BEARING SUPER CHUCK W/ KEY 1&#034; CAPACITY STOCK #DC376

JACOBS 20N BALL BEARING SUPER CHUCK W/ KEY 1" CAPACITY STOCK #DC376

  • Cleveland, Ohio, United States
  • Jan 30th
COMMAND CAT 40 TG100 COLLET CHUCK x 6&#034; W/ 3/8&#034; COLLET STOCK #D35

COMMAND CAT 40 TG100 COLLET CHUCK x 6" W/ 3/8" COLLET STOCK #D35

  • Cleveland, Ohio, United States
  • Jan 30th
Collis 72271 7/32&#034; Size Split Sleeve Drill Driver Morse No.2 Taper

Collis 72271 7/32" Size Split Sleeve Drill Driver Morse No.2 Taper

  • Chicago, Illinois, United States
  • Feb 13th
Collis 72298 5/16&#034; Size Split Sleeve Drill Driver Morse No.2 Taper

Collis 72298 5/16" Size Split Sleeve Drill Driver Morse No.2 Taper

  • Chicago, Illinois, United States
  • Feb 13th
COMMAND BT 40 COLLET CHUCK BT40 B40-CR-100 + CARBIDE END MILL

COMMAND BT 40 COLLET CHUCK BT40 B40-CR-100 + CARBIDE END MILL

  • Ellington, New York, United States
  • Feb 18th
COMMAND BT 40 COLLET CHUCK INCLUDES TOOL 1/2&#034; COLLET BT40 B4C4-1000

COMMAND BT 40 COLLET CHUCK INCLUDES TOOL 1/2" COLLET BT40 B4C4-1000

  • Ellington, New York, United States
  • Feb 18th
HHIP 3700-0102 1/32-1/2 Inch JT33 Drill Chuck with Key ~ NEW PAIR

HHIP 3700-0102 1/32-1/2 Inch JT33 Drill Chuck with Key ~ NEW PAIR

  • Columbus, Indiana, United States
  • Mar 2nd
JACOBS CHUCK

JACOBS CHUCK

  • Chattanooga, Tennessee, United States
  • Mar 2nd
NICE! TECNARA 3/4&#034; &amp; 1-1/4&#034; ENDMILL TOOL HOLDERS w/ NMTB40 SHANKS

NICE! TECNARA 3/4" & 1-1/4" ENDMILL TOOL HOLDERS w/ NMTB40 SHANKS

  • Covina, California, United States
  • Mar 8th
NICE! 2 TECNARA 3/8&#034; &amp; 1/2&#034; ENDMILL TOOL HOLDERS w/ NMTB40 SHANKS

NICE! 2 TECNARA 3/8" & 1/2" ENDMILL TOOL HOLDERS w/ NMTB40 SHANKS

  • Covina, California, United States
  • Mar 8th
Renishaw MP8 Probe CAT50 6mm Ruby Probe

Renishaw MP8 Probe CAT50 6mm Ruby Probe

  • West Milford, New Jersey, United States
  • May 24th
IBAG U96500.111 spindle controller

IBAG U96500.111 spindle controller

  • Downey, California, United States
  • May 24th
SUNNEN MANDREL K5-175-CS CC

SUNNEN MANDREL K5-175-CS CC

  • Halls, Tennessee, United States
  • May 25th
Sunnen Honing Mandrel K8-250AS DDDD

Sunnen Honing Mandrel K8-250AS DDDD

  • Halls, Tennessee, United States
  • May 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies