+ Post new Ad
6" x 18" BROWN & SHARPE Micromaster Hydraulic Surface Grinder (New 1978), US $7,950.00 – Picture 0
6" x 18" BROWN & SHARPE Micromaster Hydraulic Surface Grinder (New 1978), US $7,950.00 – Picture 0

6" X 18" Brown & Sharpe Micromaster Hydraulic Surface Grinder (new 1978)

US $7,950.00

  • Hauppauge, New York, United States
  • Jan 30th
Open on mobile:
QR code
Model: Micromaster BROWN & SHARPE, 6" x 18" Hydraulic Surface Grinder, S/N 523-6181-7382 (New 1978) Specifications: Width and length of work ground Height of work ground with 8" diameter wheel Range: longitudinal (maximum)            cross            vertical Feeds: longitudinal cross Grinding wheel speed Grinding wheel size, standard Continuous hydraulic transverse of 10 I.P.M. provided for wheel truing Continous hydraulic transverse of 12 F.P.M. provided for rapid positioning of wheel Cross feed feed handwheel graduated to read to Down feed handwheel graduated to read to Fine feed knob adjacent to vertical and cross feed handwheels graduated to read to   6" x 18" 15" 22" 7" 15-3/4" 5 to 100 F.P.M. .010" - .250" at each table         reversal 2,860 R.P.M. 8" diameter  x 1-1/4" hole x 1/2" thick 0.0002" 0.0002"  0.0001" Equipped With: Hydraulically actuated longitudinal and cross feeds Column-type design: Cross feed is achieved by hydraulically actuated movement of       grinding column 6-1/4" x 18-1/2" HITACHI MAGNA LOCK CORP. fine division electromagnetic chuck      with NEUTROFIER control Fine-feed knobs (graduated to 0.0001") to vertical and cross feed handwheels Over-the-wheel parallel dresser Oriflex spindle drive Work light 1 H.P. 3/60230-460 volt hydraulic pump motor 1 H.P. 3/60/230-460 volt spindle motor and electrical controls Machine is wired for 460 volt operation. Approximate Weight: 2,500 Lbs. Approximate Dimensions (Machine Only): 60" L-R x 60" F-B x 70" H Location: F.O.B. Truck, Hauppauge - Long Island, NY -  We Ship Worldwide Reference #: GRL_GM3186
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Brown & Sharpe
Model 618 Micromaster

Directions

Similar products from Toold for Grinding Machines

LEPEL INDUCTION HEATER

LEPEL INDUCTION HEATER

  • Erie, Pennsylvania, United States
  • Jan 30th
3M 00048011338491 (TM) Trizact(TM) Hookit(TM) Cloth Disc 337DC, X Weight,

3M 00048011338491 (TM) Trizact(TM) Hookit(TM) Cloth Disc 337DC, X Weight,

  • Richmond Hill, New York, United States
  • Jan 30th
3M 051141556567 Stikit Film Disc W/ Tab 375L, Aluminum Oxide, 5" Diameter, P240

3M 051141556567 Stikit Film Disc W/ Tab 375L, Aluminum Oxide, 5" Diameter, P240

  • Richmond Hill, New York, United States
  • Jan 30th
3M 85095 Hookit Disc Hand Pad , Hook and Loop, 5" Diameter, Yellow (Pack of 10)

3M 85095 Hookit Disc Hand Pad , Hook and Loop, 5" Diameter, Yellow (Pack of 10)

  • Richmond Hill, New York, United States
  • Jan 30th
3M 00048011331379 (TM) Trizact(TM) CF Cloth Belt 337DC, X Weight, Aluminum

3M 00048011331379 (TM) Trizact(TM) CF Cloth Belt 337DC, X Weight, Aluminum

  • Richmond Hill, New York, United States
  • Jan 30th
3M 88132 Hookit Disc Hand Pad , Hook and Loop, 5" Diameter, 1/4" Thick, Black

3M 88132 Hookit Disc Hand Pad , Hook and Loop, 5" Diameter, 1/4" Thick, Black

  • Richmond Hill, New York, United States
  • Jan 30th
3M NX PSA Paper D/F Disc Roll, Aluminum Oxide, 6 Holes, 6" Diameter, P240 Grit

3M NX PSA Paper D/F Disc Roll, Aluminum Oxide, 6 Holes, 6" Diameter, P240 Grit

  • Richmond Hill, New York, United States
  • Jan 30th
3M 00048011645117 Scotch-Brite(TM) Hookit(TM) Clean and Finish Disc, Hook

3M 00048011645117 Scotch-Brite(TM) Hookit(TM) Clean and Finish Disc, Hook

  • Richmond Hill, New York, United States
  • Jan 30th
3M PR-HA Scotch-Brite Hookit Production Clean and Finish Disc, Hook-and-Loop

3M PR-HA Scotch-Brite Hookit Production Clean and Finish Disc, Hook-and-Loop

  • Richmond Hill, New York, United States
  • Jan 30th
3M 00051141555973 (TM) Hookit(TM) Paper D/F Disc 236U, C-Weight, Hook and Loop

3M 00051141555973 (TM) Hookit(TM) Paper D/F Disc 236U, C-Weight, Hook and Loop

  • Richmond Hill, New York, United States
  • Jan 30th
Gardner 1.5 Grinder with O.S. Walker LBP Electromagnetic Chuck

Gardner 1.5 Grinder with O.S. Walker LBP Electromagnetic Chuck

  • Minneapolis, Minnesota, United States
  • Jan 30th
10cm Diamond Carbon Craft Cutting Disc Cut Off Wheel Grinding Polishing Tool DIY

10cm Diamond Carbon Craft Cutting Disc Cut Off Wheel Grinding Polishing Tool DIY

  • Shenzhen, China
  • Jan 30th
10mm Dia 47mm Length Grinding Wheel Diamond Dressing Pen Dresser Tool

10mm Dia 47mm Length Grinding Wheel Diamond Dressing Pen Dresser Tool

  • Hong Kong, Hong Kong
  • Jan 30th
11mm Diameter 2.0ct Tapered Tip Diamond Dresser for Grinding Wheel

11mm Diameter 2.0ct Tapered Tip Diamond Dresser for Grinding Wheel

  • Hong Kong, Hong Kong
  • Jan 30th
4mm Dia Head 2.35mm Shank Diamond Mounted Point Grinding Bits 4pcs

4mm Dia Head 2.35mm Shank Diamond Mounted Point Grinding Bits 4pcs

  • Hong Kong, Hong Kong
  • Jan 30th
10mm Dia Metal Shank 4.8cm Long 1.00CT Diamond Dresser for Grinding Wheel

10mm Dia Metal Shank 4.8cm Long 1.00CT Diamond Dresser for Grinding Wheel

  • Hong Kong, Hong Kong
  • Jan 30th
1 PALLET OF APPROX 50 MISC BLANCHARD GRINDING SEGMENTS MOST ARE NEW?

1 PALLET OF APPROX 50 MISC BLANCHARD GRINDING SEGMENTS MOST ARE NEW?

  • Huntington Beach, California, United States
  • Jan 30th
STRAIGHT & 90 Degree Die Grinder Pan American Tool AIRCRAFT TOOLS

STRAIGHT & 90 Degree Die Grinder Pan American Tool AIRCRAFT TOOLS

  • Bonaire, Georgia, United States
  • Jan 30th
10cm Craft Jewelry Diamond Cutting Polishing Grinding Disc Cut Off Wheel DIY

10cm Craft Jewelry Diamond Cutting Polishing Grinding Disc Cut Off Wheel DIY

  • Shenzhen, China
  • Jan 30th
Large Drill Sharpener Set for Cuttermaster

Large Drill Sharpener Set for Cuttermaster

  • Ottawa, Ontario, Canada
  • Jan 30th

People who viewed this item also vieved

VALENITE LATHE TOOL HOLDER AE 54RSXY (LOC1262B) TS12

VALENITE LATHE TOOL HOLDER AE 54RSXY (LOC1262B) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
SECO PCLNR 16 4DJET (LOC1263A) TS12

SECO PCLNR 16 4DJET (LOC1263A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
SECO LATHE TOOL HOLDER LC 01A99 C113534 (LOC1263B) TS12

SECO LATHE TOOL HOLDER LC 01A99 C113534 (LOC1263B) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
Atlas, Craftsman, Clausing, Bridgeport Horizontal Mill Cutter ( Item 18 )

Atlas, Craftsman, Clausing, Bridgeport Horizontal Mill Cutter ( Item 18 )

  • United States
  • Jan 30th
SANDVIK CAT 50 COLLET CHUCK 50MM-VF4-C3M STK1590

SANDVIK CAT 50 COLLET CHUCK 50MM-VF4-C3M STK1590

  • Wadley, Alabama, United States
  • Jan 30th
BROWN & SHARPE #7057 UNIVERSAL 50 TAPER WORK HEAD

BROWN & SHARPE #7057 UNIVERSAL 50 TAPER WORK HEAD

  • Chino, California, United States
  • Jan 30th
RIDGID 300 PIPE THREADER MACHINE WITH SET OFF DIES FROM 1/2" TO 2" & 2A CUTTER

RIDGID 300 PIPE THREADER MACHINE WITH SET OFF DIES FROM 1/2" TO 2" & 2A CUTTER

  • Staten Island, New York, United States
  • Feb 24th
Lot of 8 Assembly Technology & Testing 1087A016-333 Pins

Lot of 8 Assembly Technology & Testing 1087A016-333 Pins

  • Peoria, Illinois, United States
  • Feb 24th
System 3R Rotating Fixture EDM TOOLING, Part# 3R 1.65S w/ Controller

System 3R Rotating Fixture EDM TOOLING, Part# 3R 1.65S w/ Controller

  • Johnson City, New York, United States
  • Feb 24th
Sharpoloy & Douglas 100 series Brass & Steel 6/32 Thread chasers Qty 5 Sets

Sharpoloy & Douglas 100 series Brass & Steel 6/32 Thread chasers Qty 5 Sets

  • Milwaukee, Wisconsin, United States
  • Feb 25th
Irwin 1903 ZR 1/4 -18 NPT Taper Pipe Tap Thread Cutting & Chaser USA Made

Irwin 1903 ZR 1/4 -18 NPT Taper Pipe Tap Thread Cutting & Chaser USA Made

  • Denver, Colorado, United States
  • Feb 25th
Irwin 1907 ZR 1" -11-1/2 NPT Taper Pipe Tap Thread Cutting Cleaning USA Made

Irwin 1907 ZR 1" -11-1/2 NPT Taper Pipe Tap Thread Cutting Cleaning USA Made

  • Denver, Colorado, United States
  • Feb 25th
SET OF SCHMIDT LETTER STAMPS 3/8"

SET OF SCHMIDT LETTER STAMPS 3/8"

  • Ellington, New York, United States
  • Feb 27th
Diacro 4' Hydraulic Press Brake 14-48-2

Diacro 4' Hydraulic Press Brake 14-48-2

  • Orange, California, United States
  • Feb 28th
M A PIPE TUBING NOTCHER COPER 1 1/4-2 SCH 40 OR 1 1/2-2 090 EXCELT BISON VOGEL

M A PIPE TUBING NOTCHER COPER 1 1/4-2 SCH 40 OR 1 1/2-2 090 EXCELT BISON VOGEL

  • San Diego, California, United States
  • Feb 28th
SUNNEN HONE MANDREL AK20-1062UD 9E

SUNNEN HONE MANDREL AK20-1062UD 9E

  • Garland, Texas, United States
  • Mar 1st
SUNNEN HONE MANDREL AK20-775UA

SUNNEN HONE MANDREL AK20-775UA

  • Garland, Texas, United States
  • Mar 1st
Companion Honing Machine From RX Honing Machine Corp

Companion Honing Machine From RX Honing Machine Corp

  • Livingston, New Jersey, United States
  • Mar 1st
#22 SQUARE COLLET SET, 3 PCS TOTAL. 1/2", 7/16" ,5/16". 013015-3

#22 SQUARE COLLET SET, 3 PCS TOTAL. 1/2", 7/16" ,5/16". 013015-3

  • Fox Lake, Illinois, United States
  • Mar 8th
#22 SQUARE COLLET SET, 4 PCS TOTAL. 1/2", 7/16" ,5/16", 1/4". 013015-2

#22 SQUARE COLLET SET, 4 PCS TOTAL. 1/2", 7/16" ,5/16", 1/4". 013015-2

  • Fox Lake, Illinois, United States
  • Mar 8th
#22 SQUARE COLLET SET, 7 PCS TOTAL. 1/2", 7/16", 5/16", 7/32", 9/32", 3/8", 1/4"

#22 SQUARE COLLET SET, 7 PCS TOTAL. 1/2", 7/16", 5/16", 7/32", 9/32", 3/8", 1/4"

  • Fox Lake, Illinois, United States
  • Mar 8th
Erowa ITS System ER-009214 w/ Holder FH7

Erowa ITS System ER-009214 w/ Holder FH7

  • Bloomfield, Connecticut, United States
  • Apr 28th
Erowa ITS System ER-009214 w/ Holder FH5

Erowa ITS System ER-009214 w/ Holder FH5

  • Bloomfield, Connecticut, United States
  • Apr 28th
2001 Belmont Technologies Maxicut MX-246 ZNC EDM Sinker Machine 277.71hours

2001 Belmont Technologies Maxicut MX-246 ZNC EDM Sinker Machine 277.71hours

  • Tualatin, Oregon, United States
  • Apr 29th
#9410: Hem Automatic Horizontal Bandsaw Fabrication Equipment Used 1200 LA 1981

#9410: Hem Automatic Horizontal Bandsaw Fabrication Equipment Used 1200 LA 1981

  • Orange City, Iowa, United States
  • May 26th
Groen NVA / RA-10 Steam Jacket Pressure Vessel Tank Mixer Agitatior 100 Psi

Groen NVA / RA-10 Steam Jacket Pressure Vessel Tank Mixer Agitatior 100 Psi

  • Millstadt, Illinois, United States
  • May 26th
Rockwood FSW-355 14" Vertical Band Saw

Rockwood FSW-355 14" Vertical Band Saw

  • Stone Mountain, Georgia, United States
  • May 27th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies