+ Post new Ad
6" precision horizontal and vertical rotary table, US $179.00 – Picture 0
6" precision horizontal and vertical rotary table, US $179.00 – Picture 0

6" Precision Horizontal And Vertical Rotary Table

US $179.00

  • Lawrenceville, Georgia, United States
  • Jan 30th
Open on mobile:
QR code
  Item No. 317 - 0506  This is the right one to do the professional job, precision, reliable and durable.  Specifications: Diameter of table:  6"  ( 160 mm )   Morse taper center hole: MT2   Diameter of center hole:  0.984" x 0.236"    Center height for vertical mounting: 4.921"    Width of T slot:  0.3937"    4 T slots   Width of locating key: 0.4724"    Transmission ratio of worm gear: 1:90   Readout of hand wheel:  1'   Minimum value of vernier:  10"   Indexing accuracy: 80"   Maximum working load: 220 lbs ( horizontally )   Maximum working load: 110 lbs ( vertically )   Center bore through:  0.59"   Surface to center slot squareness 0.0003" Taper center bore concentricity TIR 0.0005" Surface to base parallelism 0.0008" Surface to angle face squareness 0.0004" Cylinder center bore concentricity TIR 0.001" Dividing plate and taistock are optional parts   TSL160=6"  
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer UNIVERSAL
Brand Universal

Directions

Similar products from Rotating Tables

SMW Rotary Table Worm Shaft. P/N: 51320006 / For Model RT375VN New

SMW Rotary Table Worm Shaft. P/N: 51320006 / For Model RT375VN New

  • Keller, Texas, United States
  • Jan 30th
Adjustable Tail Stock WEK100, 4"center, New, 80 to 120 mm adj.

Adjustable Tail Stock WEK100, 4"center, New, 80 to 120 mm adj.

  • Highland, Illinois, United States
  • Jan 30th
8" Vertex Horizontal and Vertical Rotary Table-New

8" Vertex Horizontal and Vertical Rotary Table-New

  • Chino, California, United States
  • Jan 30th
ACER VU-100 Universal Tilting Rotary Table

ACER VU-100 Universal Tilting Rotary Table

  • Fullerton, California, United States
  • Jan 30th
ACER TS-2 Tailstock for BS-1,CC-6, CS-6, HV-8

ACER TS-2 Tailstock for BS-1,CC-6, CS-6, HV-8

  • Fullerton, California, United States
  • Jan 30th
ACER TS-1 Tailstock for HV-4, HV-6, VUT-6, VU-100, VU-150, VSI-4, VSI-5, BS-0

ACER TS-1 Tailstock for HV-4, HV-6, VUT-6, VU-100, VU-150, VSI-4, VSI-5, BS-0

  • Fullerton, California, United States
  • Jan 30th
ACER HV-16 16" Horizontal/Vertical Rotary Table

ACER HV-16 16" Horizontal/Vertical Rotary Table

  • Fullerton, California, United States
  • Jan 30th
ACER CC-6 Simple Indexing Spacer

ACER CC-6 Simple Indexing Spacer

  • Fullerton, California, United States
  • Jan 30th
RARE! GENUINE CUSHMAN 5C90 INDEX SPACER FOR 5C COLLETS - VERTICAL OR HORIZONTAL

RARE! GENUINE CUSHMAN 5C90 INDEX SPACER FOR 5C COLLETS - VERTICAL OR HORIZONTAL

  • United States
  • Jan 30th
MITUTOYO TRAVERSE TABLE 160MM 178-051

MITUTOYO TRAVERSE TABLE 160MM 178-051

  • Chandler, Arizona, United States
  • Jan 30th
Jacobs Spindle Nose Lathe Chuck

Jacobs Spindle Nose Lathe Chuck

  • Johnson City, New York, United States
  • Jan 30th
Allenair 7" Pneumatic Rotary Index Table Model 725-EC FREE SHIP

Allenair 7" Pneumatic Rotary Index Table Model 725-EC FREE SHIP

  • Valencia, California, United States
  • Jan 30th
8" precision horizontal & vertical rotary table

8" precision horizontal & vertical rotary table

  • Duluth, Georgia, United States
  • Jan 30th
4 Inch Horizontal and Vertical Rotary Table-New

4 Inch Horizontal and Vertical Rotary Table-New

  • Chino, California, United States
  • Jan 30th
8" HARTFORD SUPER SPACER 3 JAW CHUCK FACE PLATE & 6 MASKING PLATES, 24 DIVISIONS

8" HARTFORD SUPER SPACER 3 JAW CHUCK FACE PLATE & 6 MASKING PLATES, 24 DIVISIONS

  • Pinellas Park, Florida, United States
  • Jan 30th
NEW Adjustable TAILSTOCK for 4" & 6" ROTARY TABLE

NEW Adjustable TAILSTOCK for 4" & 6" ROTARY TABLE

  • Carrollton, Ohio, United States
  • Jan 30th
4" HORIZONTAL & VERTICAL PRECISION ROTARY TABLE, Part#TSL100- NEW

4" HORIZONTAL & VERTICAL PRECISION ROTARY TABLE, Part#TSL100- NEW

  • Madison Heights, Michigan, United States
  • Jan 30th
16" PRECISION TILTING ROTARY TABLE, Part#TSK-400- NEW

16" PRECISION TILTING ROTARY TABLE, Part#TSK-400- NEW

  • Madison Heights, Michigan, United States
  • Jan 30th
Troyke DL Rotary Table DL-15-A

Troyke DL Rotary Table DL-15-A

  • Kearney, Missouri, United States
  • Jan 30th
4" HORIZONTAL / VERTICAL MINI ROTARY TABLE B451

4" HORIZONTAL / VERTICAL MINI ROTARY TABLE B451

  • Montville, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

SOUTH BEND-LOGAN-ATLAS 1 1/2" x 8 TPI

SOUTH BEND-LOGAN-ATLAS 1 1/2" x 8 TPI

  • Portland, Maine, United States
  • May 30th
PALMGREN , 6" x 6" TILTING MILLING , DRILLING TABLE

PALMGREN , 6" x 6" TILTING MILLING , DRILLING TABLE

  • Berlin, Connecticut, United States
  • May 30th
SUBURBAN TOOLMAKERS SINE VISE SV-337-S1 STK5817

SUBURBAN TOOLMAKERS SINE VISE SV-337-S1 STK5817

  • Wadley, Alabama, United States
  • May 30th
TTC T230-4161 5C Round Collet - Size: 61/64', THREAD: 1.240' x 20 RH (Pack of 3)

TTC T230-4161 5C Round Collet - Size: 61/64', THREAD: 1.240' x 20 RH (Pack of 3)

  • Duncan, South Carolina, United States
  • May 31st
TTC T230-4147 5C Round Collet - Size: 47/64', THREAD: 1.240' x 20 RH (Pack of 3)

TTC T230-4147 5C Round Collet - Size: 47/64', THREAD: 1.240' x 20 RH (Pack of 3)

  • Duncan, South Carolina, United States
  • May 31st
TTC T230-4153 5C Round Collet - Size: 53/64', THREAD: 1.240' x 20 RH (Pack of 3)

TTC T230-4153 5C Round Collet - Size: 53/64', THREAD: 1.240' x 20 RH (Pack of 3)

  • Duncan, South Carolina, United States
  • May 31st
BRUCKNER MT4 Carbide Tp Metal Lathe Dead Center Southbend Clausing Logan Monarch

BRUCKNER MT4 Carbide Tp Metal Lathe Dead Center Southbend Clausing Logan Monarch

  • Yorktown, Virginia, United States
  • Jun 1st
Collis Center 62405

Collis Center 62405

  • Greenville, Wisconsin, United States
  • Jun 1st
#5 Morse Taper Dead Center for Lathe

#5 Morse Taper Dead Center for Lathe

  • Sellersville, Pennsylvania, United States
  • Jun 1st
Jacobs No. 20 Chuck Key for Jacobs Chucks - NEW

Jacobs No. 20 Chuck Key for Jacobs Chucks - NEW

  • Cranford, New Jersey, United States
  • Jun 2nd
Toolmex-Tmx 10.0" 6-Jaw "SET-TRU" Forged Steel Body Lathe Chuck, 0.0006" T.I.R

Toolmex-Tmx 10.0" 6-Jaw "SET-TRU" Forged Steel Body Lathe Chuck, 0.0006" T.I.R

  • Hamden, Connecticut, United States
  • Jun 2nd
Pratt Burnerd 12 1/2" 4 Jaw Independent Chuck w D1-8 Mount Camlock 9502 63201

Pratt Burnerd 12 1/2" 4 Jaw Independent Chuck w D1-8 Mount Camlock 9502 63201

  • Sanford, Florida, United States
  • Jun 2nd
2 Jorgensen 12" C Carriage Clamps No. 112 Made in USA

2 Jorgensen 12" C Carriage Clamps No. 112 Made in USA

  • Elmer, New Jersey, United States
  • Jun 2nd
Lot of 10 hold down toggle clamps 500 pound capacity

Lot of 10 hold down toggle clamps 500 pound capacity

  • Francis Creek, Wisconsin, United States
  • Jun 2nd
WLL 2240 Super Clamp General Clamp Co. Type BA1, 2,5-8", WLL 2240 lbs.

WLL 2240 Super Clamp General Clamp Co. Type BA1, 2,5-8", WLL 2240 lbs.

  • Wilmington, Delaware, United States
  • Jun 2nd
WILTON VISE BASE PLATE #645

WILTON VISE BASE PLATE #645

  • Burleson, Texas, United States
  • Jun 3rd
Kurt Style Swivel Base for Mill Vise. 3" ? 4" ?

Kurt Style Swivel Base for Mill Vise. 3" ? 4" ?

  • Kingston, Ontario, Canada
  • Jun 3rd
Presicion Grinding / EDM Cube

Presicion Grinding / EDM Cube

  • Hartford, Connecticut, United States
  • Jun 3rd
SPI #91-298-0 2" x 2-3/4" x 2" x 2" 90 deg Universal Multipurpose V-Block Set

SPI #91-298-0 2" x 2-3/4" x 2" x 2" 90 deg Universal Multipurpose V-Block Set

  • Venice, Florida, United States
  • Jun 9th
Machinist Toolmaker V-BLOCK Large HEAVY 10 1/2 Pounds Grinder Toolroom SUPERB

Machinist Toolmaker V-BLOCK Large HEAVY 10 1/2 Pounds Grinder Toolroom SUPERB

  • East Lansing, Michigan, United States
  • Jun 11th
SPI Setup Blocks Type: 2-4-6 Blocks

SPI Setup Blocks Type: 2-4-6 Blocks

  • Crestline, California, United States
  • Jun 11th
Brown & Sharpe 22C Collet Chuck Nut Nose 3-55/64" OD 3-3/8" 8 TPI 42-17578

Brown & Sharpe 22C Collet Chuck Nut Nose 3-55/64" OD 3-3/8" 8 TPI 42-17578

  • Lorain, Ohio, United States
  • Jun 19th
LanArte Pink Rose On Aida Counted Cross Stitch Kit-13"X9.5" 14 Count

LanArte Pink Rose On Aida Counted Cross Stitch Kit-13"X9.5" 14 Count

  • Hickory Hills, Illinois, United States
  • Jun 19th
"Fancy Fleece Slotted Ruler-9-1/2""X16"""

"Fancy Fleece Slotted Ruler-9-1/2""X16"""

  • Hickory Hills, Illinois, United States
  • Jun 19th
Machinist Jack Set, 2 Screw Planer Milling Drilling leveling bridgeport USA

Machinist Jack Set, 2 Screw Planer Milling Drilling leveling bridgeport USA

  • Wausau, Wisconsin, United States
  • Jun 19th
Starrett Tool Box, Tool Not Included, Empty Box, Starrett Tools Box

Starrett Tool Box, Tool Not Included, Empty Box, Starrett Tools Box

  • Gold Bar, Washington, United States
  • Jun 21st
Tail Stock; Dividing Head; 5 1/2" (CTAM 9685)

Tail Stock; Dividing Head; 5 1/2" (CTAM 9685)

  • Sicklerville, New Jersey, United States
  • Jun 21st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies