+ Post new Ad
5/8 X 11 HOLD DOWN CLAMPS KITS, US $770 – Picture 0
5/8 X 11 HOLD DOWN CLAMPS KITS, US $770 – Picture 0

5/8 X 11 Hold Down Clamps Kits

US $770

  • California, United States
  • Jun 9th
Open on mobile:
QR code
5/8 X 11 HOLD DOWN CLAMPS KITS  Sizes: 5/8 X 11 "  ** Comes as Shown ** **Discounted shipping available when MORE THAN one item is purchased but must send invoice request** ** If item is not paid within THREE days it will be relisted unless we are contacted** **The max number of days we will hold items for you is 3 days** ** WE CAN NOT Combined shipping on orders out of the USA** 

Directions

Similar products from Fittings & Plates

NICE! PRECISION 2" TOOLMAKERS VICE

NICE! PRECISION 2" TOOLMAKERS VICE

  • Ellington, New York, United States
  • Jun 9th
Vacuum Hold Down Table W Rotary Stop Pneumatic Woodworking, Painting, Metalwork

Vacuum Hold Down Table W Rotary Stop Pneumatic Woodworking, Painting, Metalwork

  • DeKalb, Illinois, United States
  • Jun 9th
Like New Vacmagic VM300 Vacuum Pallet Chuck Workholding Unit CNC

Like New Vacmagic VM300 Vacuum Pallet Chuck Workholding Unit CNC

  • Baldwin Park, California, United States
  • Jun 9th
Challenge A27 Milling Machine Tooling 50 Plus Lot Wedges

Challenge A27 Milling Machine Tooling 50 Plus Lot Wedges

  • Willington, Connecticut, United States
  • Jun 9th
sine bar

sine bar

  • Akron, Ohio, United States
  • Jun 9th
MACHINIST'S LOT ASSORTED HOLD DOWN CLAMP S FOR MILLER BRIDGEPORT ETC.

MACHINIST'S LOT ASSORTED HOLD DOWN CLAMP S FOR MILLER BRIDGEPORT ETC.

  • Golden Valley, Arizona, United States
  • Jun 9th
8-1/2"-dia. face plate for Atlas Craftsman lathe 9-365

8-1/2"-dia. face plate for Atlas Craftsman lathe 9-365

  • West Des Moines, Iowa, United States
  • Jun 9th
TROCK MODIFIED CYLINDER HEAD PLATE HARLEY / AFTERMARKET HEADS

TROCK MODIFIED CYLINDER HEAD PLATE HARLEY / AFTERMARKET HEADS

  • Winston-Salem, North Carolina, United States
  • Jun 9th
toyo sine bar metric 200 mm machinist tools grinding milling tool

toyo sine bar metric 200 mm machinist tools grinding milling tool

  • Connersville, Indiana, United States
  • Jun 9th
toyo sine bar metric 200 mm 67501 machinist tools grinding milling tool

toyo sine bar metric 200 mm 67501 machinist tools grinding milling tool

  • Connersville, Indiana, United States
  • Jun 9th
ANGLE PLATES CAST IRON SET OF (3) WITH T-SLOTS 12 1/2 X 18 X 42

ANGLE PLATES CAST IRON SET OF (3) WITH T-SLOTS 12 1/2 X 18 X 42

  • Wallingford, Connecticut, United States
  • Jun 9th
Vintage 3" Compound Sine Plate 3 7/8" X 3 7/8" X 2 3/4" Tall Tool Maker Made

Vintage 3" Compound Sine Plate 3 7/8" X 3 7/8" X 2 3/4" Tall Tool Maker Made

  • Yorktown, Indiana, United States
  • Jun 9th
new IRWIN RECORD 4/5SB, 360° Blue Swivel Base for #4 & #5 Vices (4SB / 5SB)

new IRWIN RECORD 4/5SB, 360° Blue Swivel Base for #4 & #5 Vices (4SB / 5SB)

  • Champlain, New York, United States
  • Jun 9th
new IRWIN RECORD 84-34 23SB, 360° Blue Swivel Base for #5 Vices 5SB

new IRWIN RECORD 84-34 23SB, 360° Blue Swivel Base for #5 Vices 5SB

  • Champlain, New York, United States
  • Jun 9th
new IRWIN RECORD 1SB, 360° Blue Swivel Base for #1 Vice

new IRWIN RECORD 1SB, 360° Blue Swivel Base for #1 Vice

  • Champlain, New York, United States
  • Jun 9th
JERGENS 850204 KLP RING HANDLE M5 X 30 SS

JERGENS 850204 KLP RING HANDLE M5 X 30 SS

  • Novi, Michigan, United States
  • Jun 8th
PHASE II Adjustable Tailstock for 12''

PHASE II Adjustable Tailstock for 12''

  • Duncan, South Carolina, United States
  • Jun 8th
Schedule 10 / 40 Elbow Cutting Fixture 1.5"

Schedule 10 / 40 Elbow Cutting Fixture 1.5"

  • Pittsburgh, Pennsylvania, United States
  • Jun 8th
Schedule 10 / 40 Elbow Cutting Fixture 1.25"

Schedule 10 / 40 Elbow Cutting Fixture 1.25"

  • Pittsburgh, Pennsylvania, United States
  • Jun 8th
12 Washing Machine Lint Traps Aluminum Mesh with Clamps 12

12 Washing Machine Lint Traps Aluminum Mesh with Clamps 12

  • US, United States
  • Jun 8th

People who viewed this item also vieved

PARALLELS 1/8 thick steel MADE IN USA

PARALLELS 1/8 thick steel MADE IN USA

  • Mechanicsville, Maryland, United States
  • Jan 30th
V Block, Machinist V Block with Clamp, 1-5/8" High X 1-3/4" Wide x 2-3/4" Long

V Block, Machinist V Block with Clamp, 1-5/8" High X 1-3/4" Wide x 2-3/4" Long

  • Saunderstown, Rhode Island, United States
  • Jan 30th
Machinist Right Angle Set Up Block TOOL MAKER MILLING LATHE

Machinist Right Angle Set Up Block TOOL MAKER MILLING LATHE

  • Macomb, Michigan, United States
  • Jan 30th
INTERSTATE 8 Point 4MT Shank Heavy Duty Interchangeable Point Live Center Set 1Y

INTERSTATE 8 Point 4MT Shank Heavy Duty Interchangeable Point Live Center Set 1Y

  • Saint Louis, Missouri, United States
  • Jan 30th
WELL USED DAMAGED #2MT MORSE TAPER DEAD CENTER (.728"-Point Diameter)

WELL USED DAMAGED #2MT MORSE TAPER DEAD CENTER (.728"-Point Diameter)

  • Fairfield, Iowa, United States
  • Jan 30th
NEW Z LIVE CENTER 5MT CNC PRECISION LONG NOSE LATHE LIVE CENTER MORSE TAPER #5

NEW Z LIVE CENTER 5MT CNC PRECISION LONG NOSE LATHE LIVE CENTER MORSE TAPER #5

  • Diamond Bar, California, United States
  • Jan 30th
Electro Magnet Chuck Lifting Holding 220 Volt Dc

Electro Magnet Chuck Lifting Holding 220 Volt Dc

  • Bridgeport, Connecticut, United States
  • Jan 30th
Electro Magnet Chuck 10/24 Fine Pole

Electro Magnet Chuck 10/24 Fine Pole

  • Bridgeport, Connecticut, United States
  • Jan 30th
Kitagawa 8' 3 jaw chuck HJA6-8

Kitagawa 8' 3 jaw chuck HJA6-8

  • West Chicago, Illinois, United States
  • Jan 30th
(2) Wilton No. 2" Heavy Duty Bridge C-Clamp Ring FREE SHIPPING

(2) Wilton No. 2" Heavy Duty Bridge C-Clamp Ring FREE SHIPPING

  • Cornell, Illinois, United States
  • Jan 30th
Lot of 12 Knu Vise P-400

Lot of 12 Knu Vise P-400

  • Ventura, California, United States
  • Jan 30th
(2) Wilton No. 3, 3" Heavy Duty Bridge C-Clamp Ring FREE SHIPPING

(2) Wilton No. 3, 3" Heavy Duty Bridge C-Clamp Ring FREE SHIPPING

  • Cornell, Illinois, United States
  • Jan 30th
S-22 COLLET CHUCK WITH MASTER COLLET FOR HARDINGE, MAZAK, OKUMA, DAEWOO MACHINES

S-22 COLLET CHUCK WITH MASTER COLLET FOR HARDINGE, MAZAK, OKUMA, DAEWOO MACHINES

  • Cedar, Minnesota, United States
  • Jan 30th
5C LEVER COLLET CLOSER PRECISION LYNDEX CORPORATION NEW IN BOX SHERLINE TAIG

5C LEVER COLLET CLOSER PRECISION LYNDEX CORPORATION NEW IN BOX SHERLINE TAIG

  • Erlanger, Kentucky, United States
  • Jan 30th
Harginge 2J Collet Chuck - D6 Backing w/ 26 Collets

Harginge 2J Collet Chuck - D6 Backing w/ 26 Collets

  • Brooksville, Florida, United States
  • Jan 30th
HARDINGE 22SC HEX COLLETS SEE DESCIPTION FOR AVAILABLE SIZES

HARDINGE 22SC HEX COLLETS SEE DESCIPTION FOR AVAILABLE SIZES

  • Wadley, Alabama, United States
  • Jan 30th
ORIGINAL SUTTON 1" CONE 11-2 .432 COLLET LATHE MILLING MACHINIST TOOL

ORIGINAL SUTTON 1" CONE 11-2 .432 COLLET LATHE MILLING MACHINIST TOOL

  • Danville, New Hampshire, United States
  • Jan 30th
VERY NICE ORIGINAL SOUTH BEND #3 3C COLLET 5/16 IN ORIGINAL CONTAINER 4 9" LATHE

VERY NICE ORIGINAL SOUTH BEND #3 3C COLLET 5/16 IN ORIGINAL CONTAINER 4 9" LATHE

  • Danville, New Hampshire, United States
  • Jan 30th
NOS MILL MONSTER USA 1" 4 Flute Solid Carbide END MILL OAL 4" 206-001260 $197

NOS MILL MONSTER USA 1" 4 Flute Solid Carbide END MILL OAL 4" 206-001260 $197

  • Ontario, Canada
  • Jan 30th
NOS MILL MONSTER USA 1/2"' 3 Flute SOLID CARBIDE 60 Deg HIGH Helix Tin END MILL

NOS MILL MONSTER USA 1/2"' 3 Flute SOLID CARBIDE 60 Deg HIGH Helix Tin END MILL

  • Ontario, Canada
  • Jan 30th
NOS Starrett USA C635-300 300mm Spring-Tempered Steel Rule with Millimeter Grad.

NOS Starrett USA C635-300 300mm Spring-Tempered Steel Rule with Millimeter Grad.

  • Ontario, Canada
  • Jan 30th
Farmington 60 In. Air Lift Table with 36 in. Sub Table

Farmington 60 In. Air Lift Table with 36 in. Sub Table

  • Portland, Connecticut, United States
  • Jan 30th
Troyke U-12 Rotary Table 12 Inch (Inv.20484)

Troyke U-12 Rotary Table 12 Inch (Inv.20484)

  • Portland, Connecticut, United States
  • Jan 30th
COMPOUND SLIDE TABLE W.SWIVEL TABLE 11-13/16"X7-7/8"

COMPOUND SLIDE TABLE W.SWIVEL TABLE 11-13/16"X7-7/8"

  • Madison Heights, Michigan, United States
  • Jan 30th
Ridgid 72092 Chain Assy

Ridgid 72092 Chain Assy

  • Omaha, Nebraska, United States
  • Jan 30th
Bessy 4.5 inch 4.5" Bench Vise

Bessy 4.5 inch 4.5" Bench Vise

  • Chipley, Florida, United States
  • Jan 30th
Bessy 4 inch 4" Drill Press Vise

Bessy 4 inch 4" Drill Press Vise

  • Chipley, Florida, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies