US $99.00
Condition | Used
:
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
|
Seller Notes | “Check the photos for the actual collets. We take close up photos!” |
Directions
Similar products from Metalworking Collets
LOT of (4) VARIOUS DUNHAM 5C COLLETS
LOT of (18) VARIOUS SMALL COLLETS
LOT of (2) HARDINGE 1" COLLET STOPS
SEA TECH COLLET CLIP 22MM PART # 1147-22 (QTY: 150) BLACK 15/16"
SEA TECH COLLET CLIP (QTY: 150) PART # 1147-15 BEIGE 5/8"
3 Kennametal DA300 Collet Chucks # SS050DA304681 .500 diameter shank. 1 collet.
NICE Original Hardinge 1-5/8" Cone Collet 1-9/16", Threaded Lathe Grinder ID/OD
NICE Hardinge 1-5/8" Cone Collet Size, HEX 1-5/16", Threaded Lathe Grinder ID/OD
(4) Pieces Milling Chuck Collets, 3/4" OD x 2.18" Length, 1/4" 3/8" Mill
NICE Original Hardinge 1-5/8" Cone Collet 1-1/2", Threaded Lathe Grinder ID/OD
(5) Assorted 1-5/8" Cone Collets, Camco Ballas Morrison, Lathe Grinder ID/OD
CLEAN (6) Pieces Milling Collets, 2" Diameter x 3.5" Length, 1", 1-1/4", 1-1/2"
(8) Pieces Milling Chuck Collets, 1.25" OD x 2.75" L, 1/4 3/8 5/16 5/8 3/4 7/8
NICE Sheffer 1-5/8" Cone Collet Size, HEX 1-1/16", Threaded Lathe Grinder ID/OD
(30) HARDINGE 21SC COLLETS 32nds 64ths LATHE GRINDER ID/OD Browne Sharpe
NICE Hardinge 1-5/8" Cone Collet Size, HEX 1-3/8", Threaded, Lathe Grinder ID/OD
(6) Pieces Milling Chuck Collets, 1" OD x 2.35" Length, 3/8" 1/2" 3/4" 7/8"
(4) Clean HARDINGE 5C SQUARE COLLETS ALL DIFFERENT LATHE GRINDER ID/OD HEX
(4) Hardinge 1-5/8" Cone Collet, S16 Removable Type Pad, Lathe Grinder, Britian
People who viewed this item also vieved
HERMANN SCHMIDT 6" x 6" MAGNETIC SQUARING BLOCK *
LEVIN #12 Index Plate and Hub, for "3c" Watchmaker's Jeweler's Lathe
T Slotted Adjustable Angle Plate - 12" x 10" - HEAVY DUTY!
2 PACK 11" VISE GRIPS LOCKING C CLAMP PLIERS w/FLEX PADS
GH-36202M 91Kg 20mm Plunger Stroke Push Pull Toggle Clamp Hand Tool
Quickly Holding Red Plastic Handle Latch Type Toggle Clamp 421 200Kg 441 Lbs
5" DRILL PRESS VISE / PIPE CLAMPING HOLDING CAST IRON VISE CHIVD5
Vintage Workbench Vise Heavy Duty Cast Steel Circa 1920 Locking Swivel Base
Vintage Vulcan No.1 Chain Pipe Vise by J.H. Williams & Co, Made in Buffalo NY
bulk 10pcs 1.5" ER32 100L Straight collet chuck toolholder
***NEW*** BISON 10" 4 JAW CHUCK WITH D1-6 CAMLOCK MOUNT DISCOUNTED 25% OFF !!!
NEW! BISON 8" 4 JAW LATHE CHUCK W/ D1-5 BACK MOUNT
NEW LOT 5EA SKODA DEAD CENTER HALF POINT 8730-3 MT3
NEW RITEN LIVE CENTER SUPER ACCURATE 20MM STRAIGHT SHANK E5289
NEW NAKANE LS LIVE CENTER SUPER ACCURATE MT2
Vintage WedgeLock Pliers and Pins - AIRCRAFT TOOLS
4 piece LOT of 123 BLOCKS - Free Priority shipping !!
FLAT ANGLE GAGE BLOCKS SET 12 MACHINIST TOOLMAKER INSPECTION GRIND!!
Machinist angle blocks 3 3/4" x 2" x 1 3/4" and 2 1/2" X 2" x 1 3/4"
Taft Peirce Sine Block Model No.9119-10 W/ Wood Case
MAKINO ROTARY NC TABLE A55 HMC
BRAND NEW ERICKSON-BROWN & SHARPE MODEL 600 SPEED INDEXER 1978 W/ BUILD SHEETS
Palmgren Rotary Indexing Table, 5/8" T-Slots, 10" x 3-7/8", 34105 Never used
22 Pc Techniks CAT 40 ER 32-2.76" CNC Collet Chucks Kit -18 x Collet Set, Wrench
3 Pcs. Techniks CAT 40 ER 32-2.76" 25K RPM @G2.5 Balanced CNC Collet Chucks Kit
20 Pc Techniks CAT 40 ER 32-2.76" CNC Chuck Kit-18 x Coolant Collet Set,Wrench
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies