10mhz Isotemp Ocxo 134-10 134-23 Crystal Oscillator

US $35.99

SHANGHAI, China
Jan 29th

Open on mobile:
QR code

TWO MODEL:OCXO134-10 and OCXO134-23, SAME DIMENSION AND PINOUT pdf file:www.jrmiller.demon.co.uk/projects/ministd/ocxo134-10.pdf DC 12V IN ,10MHZ SINE WAVE OUT We test all before delivery. It will shipped to all country by Hong Kong Post worldwide. 1. OUTPUT 1.1. Frequency 10.000 MHz 1.2. Wave form Sine wave 1.3. Level 2 Vp-p ±10% into 50 W 1.4. Load 50 W ±5% 1.5. Harmonics < -25 dBc 1.6. Spurious < -60 dBc 2. STABILITY 2.1. Ambient < ±5x10-9 from -30°C to +60°C (referenced to +25°C) 2.2. Aging a. Daily i. After 30 days < ±1x10-9 ii. After 90 days < ±5x10-10 b. Yearly < ±1.5x10-7 c. 10 years < ±4x10-7 2.3. Voltage < ±5x10-10/±2% change 2.4. Short term < 1x10-10/second root Allan variance 2.5. Load < ±1x10-9/±5% change 2.6. Warm-up @ -30°C referenced to frequency @ 5 hours a. 30 minutes < ±5x10-8 b. 60 minutes < ±1x10-8 2.7. Phase noise a. @ 10 Hz < -105 dBc b. @ 100 Hz < -125 dBc c. @ 1 kHz < -140 dBc 3. ELECTRICAL FREQUENCY ADJUSTMENT 3.1. Range > ±0.45 PPM < ±1.2 PPM (At time of shipment) (Referenced to nominal frequency) 3.2. Control 0 VDC to Vref (0 VDC to +8 VDC ) or a 10 kW potentiometer connected between pins 2 and 4 with wiper connected to pin 3. 3.3. Slope Positive 3.4. Center Vref/2 ±10% of Vref (+4 VDC to +0.8 VDC) 4. REFERENCE VOLTAGE 4.1. Voltage +8 VDC ±5% 4.2. Current < 1 mA 4.3. Stability a. Ambient < ±10 mV (Over temperature range in 2.1.) b. Input voltage < ±1 mV/2% 5. INPUT POWER 5.1. Voltage +13 VDC ±2 VDC 5.2. Current < 800 mA @ turn on 5.3. Steady state a. @ +25°C < 2.8 Watts b. @ -30°C < 6 Watts 6. OVEN MONITOR 6.1. Oven at temperature a. Voltage > +3.5 VDC 6.2. Oven not at temperature a. Voltage < +1 VDC 7. ENVIRONMENTAL 7.1. Humidity MIL-STD-202F, Method 103B, Test Condition A (95% R.H. @ +40°C, non-condensing, 240 hours) 7.2. Storage temperature -40°C to +85°C 7.3. Vibration (non-operating) MIL-STD-202F method 201A (0.06" Double amplitude, 10 to 55 Hz) 7.4. Shock (non-operating) MIL-STD-202F method 214 test condition J (30 g’s, 11 ms, Half-sine) 8. MECHANICAL 8.1. Applicable series OCXO 134 series 8.2. Model number OCXO 134-10 or ocxo134-23 8.3. Outline drawing 125-396 Shipping Terms We ship to the confirmed address provided by PayPal. Before you pay, please make sure your address in PayPal matches the address you would like us to ship to. Payment Terms All Paypal Payments must be Confirmed ( Shipping and billing addresses must match )