+ Post new Ad
(1) TUBE Type Single-Sided Powered Uncoiler - Used - AM10800, US $3,200.00 – Picture 0
(1) TUBE Type Single-Sided Powered Uncoiler - Used - AM10800, US $3,200.00 – Picture 1
(1) TUBE Type Single-Sided Powered Uncoiler - Used - AM10800, US $3,200.00 – Picture 0
(1) TUBE Type Single-Sided Powered Uncoiler - Used - AM10800, US $3,200.00 – Picture 1

(1) Tube Type Single-sided Powered Uncoiler - Used - Am10800

US $3,200.00

  • Cleveland, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
The TUBE Type Single-Sided Powered Uncoiler is a used machine with the specifications you need. It can handle a maximum coil weight of 1,000 lbs and a maximum coil outside diameter of approximately 48 inches. This machine includes a reliable 1 HP Drive Motor and 230/460 Volt, 60 Hz, 3 Phase Electrics. You can use this uncoiler in many applications, including Dust Extraction, Fabricating Machinery, Sawing & Cutoff, and Tube & Pipe projects. We have new arrivals daily, so be sure to check back often. Please note that all used items sold by us are sold as-is and without any representations or warranties, expressed or implied. The purchaser assumes responsibility for compliance with applicable governmental laws or requirements and the use of safety devices or equipment necessary for their protection. F.O.B. Cleveland, Ohio, unless otherwise specified. Thank you for considering Allset Machine for your next project. This item is available immediately and priced to sell. We offer a variety of shipping options to fit your needs. Don't hesitate to call us with any questions you may have. Allset Machine is committed to delivering high-quality products and excellent customer service.

Directions

Similar products from Tools for Fabrication Equipment

Rivet Squeezer

Rivet Squeezer

  • West Liberty, Ohio, United States
  • Jan 30th
CHICAGO W31 BOX & PAN FINGER BRAKE - #W31 - WHITNEY - BENDING

CHICAGO W31 BOX & PAN FINGER BRAKE - #W31 - WHITNEY - BENDING

  • Chino, California, United States
  • Jan 30th
LOT OF SCHMIDT HI-DUTY 3/32" MARKING LETTERS A THRU Z AND 0 TO 9 W/ WOODEN BOX

LOT OF SCHMIDT HI-DUTY 3/32" MARKING LETTERS A THRU Z AND 0 TO 9 W/ WOODEN BOX

  • Ellington, New York, United States
  • Jan 30th
50 HP SUTORBILT MDL SLR1750 LIQUID RING VACUUM PUMP W/ MOTOR, SKID, AND CONTROLS

50 HP SUTORBILT MDL SLR1750 LIQUID RING VACUUM PUMP W/ MOTOR, SKID, AND CONTROLS

  • Long Beach, California, United States
  • Jan 30th
CNC PUNCH PRESS PNEUMATIC AIR STOCK CLAMP STABILIZER HOLDER

CNC PUNCH PRESS PNEUMATIC AIR STOCK CLAMP STABILIZER HOLDER

  • La Puente, California, United States
  • Jan 30th
24 Ga. LOCKFORMER, Pittsburgh, Flanging Attachment, 1 Phase (28661)

24 Ga. LOCKFORMER, Pittsburgh, Flanging Attachment, 1 Phase (28661)

  • Cincinnati, Ohio, United States
  • Jan 30th
(1) PRESS FEED Straightener - Used - AM12399

(1) PRESS FEED Straightener - Used - AM12399

  • Cleveland, Ohio, United States
  • Jan 30th
(1) TUBE Type Single-Sided Powered Uncoiler - Used - AM10798

(1) TUBE Type Single-Sided Powered Uncoiler - Used - AM10798

  • Cleveland, Ohio, United States
  • Jan 30th
(1) Vogel Tool & Die Press Mount Type Tube Shear - End Notcher - Used - AM12569

(1) Vogel Tool & Die Press Mount Type Tube Shear - End Notcher - Used - AM12569

  • Cleveland, Ohio, United States
  • Jan 30th
(1) Type Double-Sided Powered Uncoiler - Used - AM10780

(1) Type Double-Sided Powered Uncoiler - Used - AM10780

  • Cleveland, Ohio, United States
  • Jan 30th
Hydraulic Shear 1/2"x 6" Cap For Bar /Plate ,W.A.Whitney 45 Ton....Runs Good !!!

Hydraulic Shear 1/2"x 6" Cap For Bar /Plate ,W.A.Whitney 45 Ton....Runs Good !!!

  • Providence, Rhode Island, United States
  • Jan 30th
DIACRO #1 ROTARY BENDER FORMER ***XLNT***

DIACRO #1 ROTARY BENDER FORMER ***XLNT***

  • Highland, New York, United States
  • Jan 30th
COOPER WEYMOUTH 6" X .062" SCRAP CHOPPER 110V 1/3HP W/WAGON ***VGC***

COOPER WEYMOUTH 6" X .062" SCRAP CHOPPER 110V 1/3HP W/WAGON ***VGC***

  • Highland, New York, United States
  • Jan 30th
Acra Ironworker

Acra Ironworker

  • Fort Worth, Texas, United States
  • Jan 30th
NATIONAL INTERNAL BROACH TOOLING ROTARY CUTTERS SLEEVES UNITS **LARGE LOT**

NATIONAL INTERNAL BROACH TOOLING ROTARY CUTTERS SLEEVES UNITS **LARGE LOT**

  • Highland, New York, United States
  • Jan 30th
DI ACRO No 4 ROTARY BENDER QUICK CLAMP #4 EXCELLENT CONDITION DIACRO TUBE /

DI ACRO No 4 ROTARY BENDER QUICK CLAMP #4 EXCELLENT CONDITION DIACRO TUBE /

  • Fair Haven, New Jersey, United States
  • Jan 30th
16 Ga. x 08' Roundo Model 1R 110/8 Initial Pinch Power Roll, S/N 1862 (1989)

16 Ga. x 08' Roundo Model 1R 110/8 Initial Pinch Power Roll, S/N 1862 (1989)

  • Huntington Park, California, United States
  • Jan 30th
12 Ga. x 6' Chicago Model: SO-612 Hand Brake, S/N 323206-M

12 Ga. x 6' Chicago Model: SO-612 Hand Brake, S/N 323206-M

  • United States
  • Jan 30th
49.6 Short Ton, KOMATSU #OBS-45-3 Gap Frame Press, New 1987

49.6 Short Ton, KOMATSU #OBS-45-3 Gap Frame Press, New 1987

  • Brooklyn, New York, United States
  • Jan 30th
Peterson Roll Feed DDR 123HS

Peterson Roll Feed DDR 123HS

  • Pawtucket, Rhode Island, United States
  • Jan 30th

People who viewed this item also vieved

Ingersoll S Max SP6N-04R01Face Mill Toolholder

Ingersoll S Max SP6N-04R01Face Mill Toolholder

  • Greenwood, Indiana, United States
  • May 25th
HEAVY DUTY CUSTOMIZE 3" ROTARY TABLE HORIZONTAL VERTICAL USE FOR DIY MACHINISTS

HEAVY DUTY CUSTOMIZE 3" ROTARY TABLE HORIZONTAL VERTICAL USE FOR DIY MACHINISTS

  • DELHI, DELHI, India
  • May 25th
KENNAMETAL INDEXABLE SHELL MILL CUTTERS KFSR600OF5345F8 DIA 6" (152.4MM)

KENNAMETAL INDEXABLE SHELL MILL CUTTERS KFSR600OF5345F8 DIA 6" (152.4MM)

  • BANGALORE, KARNATAKA, India
  • May 25th
Tool Rest off Tool & Cutter Grinder

Tool Rest off Tool & Cutter Grinder

  • Boaz, Alabama, United States
  • May 25th
Atlas Craftsman 10-12" Lathe 36-A Change Gear

Atlas Craftsman 10-12" Lathe 36-A Change Gear

  • Pomona, California, United States
  • May 25th
VALENITE LATHE TOOL HOLDER CCLAR-16-4 STK 2504

VALENITE LATHE TOOL HOLDER CCLAR-16-4 STK 2504

  • Wadley, Alabama, United States
  • May 25th
Cincinnati Main Spindle Clutch

Cincinnati Main Spindle Clutch

  • Berlin, Connecticut, United States
  • May 28th
Tekcast Metal Casting Machine

Tekcast Metal Casting Machine

  • Montreal-Nord, Quebec, Canada
  • May 28th
Aloris Quick Change Threading Tool Post Holder Model CA-8 With P-6 Blade

Aloris Quick Change Threading Tool Post Holder Model CA-8 With P-6 Blade

  • Weaverville, North Carolina, United States
  • May 28th
2 Pairs DoAll 1/2" Guide Blocks, total 4 pieces

2 Pairs DoAll 1/2" Guide Blocks, total 4 pieces

  • Valencia, California, United States
  • May 29th
13" Phoenix Automatic Horizontal Band Saw

13" Phoenix Automatic Horizontal Band Saw

  • Crestline, Ohio, United States
  • May 29th
HEM H130HM-DC with 5FT Free Standing Stock Table

HEM H130HM-DC with 5FT Free Standing Stock Table

  • Ferndale, Michigan, United States
  • May 29th
VINTAGE STANLEY BENCH GRINDER MODEL 667 RIGHT SIDE GUARD

VINTAGE STANLEY BENCH GRINDER MODEL 667 RIGHT SIDE GUARD

  • Waterford, Michigan, United States
  • May 29th
DELTA ROCKWELL 7" TRIPLE DUTY GRINDER BG2 WHEEL GUARD

DELTA ROCKWELL 7" TRIPLE DUTY GRINDER BG2 WHEEL GUARD

  • Waterford, Michigan, United States
  • May 29th
DECKEL MODEL S1 TOOL & CUTTER GRINDER WITH PARTS

DECKEL MODEL S1 TOOL & CUTTER GRINDER WITH PARTS

  • Saint-Laurent, Quebec, Canada
  • May 29th
Set of 4 3R Mini Holders with Mounted EDM Graphite Electrode

Set of 4 3R Mini Holders with Mounted EDM Graphite Electrode

  • Cochranton, Pennsylvania, United States
  • May 30th
C3 Graphite EDM Electrode Mounted on 3R Holder

C3 Graphite EDM Electrode Mounted on 3R Holder

  • Cochranton, Pennsylvania, United States
  • May 30th
Charmilles float sensors

Charmilles float sensors

  • Anoka, Minnesota, United States
  • May 30th
(400) 3/8-24 X 3/8 Helicoil inserts

(400) 3/8-24 X 3/8 Helicoil inserts

  • Peabody, Massachusetts, United States
  • May 30th
TAP ADAPTER VAL/SMITH TOOL TYPE FOR 5/8" TAP SIZE 2 STK 6454

TAP ADAPTER VAL/SMITH TOOL TYPE FOR 5/8" TAP SIZE 2 STK 6454

  • Wadley, Alabama, United States
  • May 30th
MINI DRILLS .040 SIZE 6 PIECES

MINI DRILLS .040 SIZE 6 PIECES

  • Vincentown, New Jersey, United States
  • May 30th
Sunnen Twelve Honing Stones K10A55

Sunnen Twelve Honing Stones K10A55

  • Halls, Tennessee, United States
  • Jun 2nd
Sunnen Twelve Honing Stones K6-A55 7L

Sunnen Twelve Honing Stones K6-A55 7L

  • Halls, Tennessee, United States
  • Jun 2nd
Sunnen Twelve Honing Stones KA-J57 Lot of 5

Sunnen Twelve Honing Stones KA-J57 Lot of 5

  • Halls, Tennessee, United States
  • Jun 2nd
BROWN & SHARPE REAR SQUARE TOOL HOLDER 161-322

BROWN & SHARPE REAR SQUARE TOOL HOLDER 161-322

  • Baldwinville, Massachusetts, United States
  • Jun 5th
BROWN & SHARPE SCREW MACHINE TOOLING 52-222

BROWN & SHARPE SCREW MACHINE TOOLING 52-222

  • Baldwinville, Massachusetts, United States
  • Jun 5th
TANGENT CHASER THREADING TOOL HOLDER

TANGENT CHASER THREADING TOOL HOLDER

  • Cadiz, Kentucky, United States
  • Jun 6th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies