+ Post new Ad
1 Pafana Boring Bar Shank 2" Triangle TNMG Length 432, US $155.00 – Picture 0
1 Pafana Boring Bar Shank 2" Triangle TNMG Length 432, US $155.00 – Picture 0

1 Pafana Boring Bar Shank 2" Triangle Tnmg Length 432

US $155.00

  • Columbus, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
1 Pafana Boring Bar Shank 2" Triangle TNMG Length 10" Toolholder Style # SI-MTUNR/L Right Hand Square Shank 2" Size # 32-4 Overall Length 14" Min Bore 2.562 Negative 60° Triangle 432 Negative 3° Side & End Cutting Angle Supplied With Pin & Clip Toolholder Accepts Standard Screw On Type Carbide Inserts Triangle 432 TNMG Carbide Inserts & Shims : Sold Separatly Same Toolholder Left Hand If Buyer Specify Around Checkout Time? Same Right Hand Price $9.00 Shipping Inside Continental 48 United States. Alaska & Hawaii & International buyers pay priority cost. We require a physical address on all items Sorry NO P.O. Box. 575 N. Hague Ave. Columbus, Ohio. 43204 Phone # 1-800-543-5998 After purchasing, pay instantly with your credit card through PayPal!
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Toolholding Part Type Boring Tool Holders

Directions

Similar products from Drilling Heads & Tool Holders

VALENITE VPB PC6-75EM3 BORING TOOL HOLDER

VALENITE VPB PC6-75EM3 BORING TOOL HOLDER

  • Toms River, New Jersey, United States
  • Jan 30th
Spade Drill 801-003 #18 w 1-1/16" Insert Geo. Whalley Co. 1" Shank

Spade Drill 801-003 #18 w 1-1/16" Insert Geo. Whalley Co. 1" Shank

  • Hendersonville, Tennessee, United States
  • Jan 30th
Agripper No. 81 Metal Lathe Boring Tool Holder Shank Size 7/8" High x 1/2" Wide

Agripper No. 81 Metal Lathe Boring Tool Holder Shank Size 7/8" High x 1/2" Wide

  • Cobleskill, New York, United States
  • Jan 30th
KENNAMETAL SOLID CARBIDE INDEXABLE COOLANT FED BORING BAR - 1/2" x 8" LONG

KENNAMETAL SOLID CARBIDE INDEXABLE COOLANT FED BORING BAR - 1/2" x 8" LONG

  • Covina, California, United States
  • Jan 30th
C10S-SVJPR-2 Carbide Boring Bar 5/8" Dia x 10" long

C10S-SVJPR-2 Carbide Boring Bar 5/8" Dia x 10" long

  • Cicero, Illinois, United States
  • Jan 30th
Circle CCBI-180/625-7/8-5R CARBIDE BORING BAR

Circle CCBI-180/625-7/8-5R CARBIDE BORING BAR

  • Cicero, Illinois, United States
  • Jan 30th
CIRCLE FCBI-312/625-1 1/2-5R CARBIDE BORING BAR

CIRCLE FCBI-312/625-1 1/2-5R CARBIDE BORING BAR

  • Cicero, Illinois, United States
  • Jan 30th
Criterion Boring Head with R-8 Shank

Criterion Boring Head with R-8 Shank

  • Unionville, Pennsylvania, United States
  • Jan 30th
RIGIBORE R3B2 Boring Cartridge

RIGIBORE R3B2 Boring Cartridge

  • Fort Worth, Texas, United States
  • Jan 30th
1 Pafana Boring Bar Shank 2 Diamond CNMG Length 16"

1 Pafana Boring Bar Shank 2 Diamond CNMG Length 16"

  • Carrollton, Ohio, United States
  • Jan 30th
TSD DeVlieg 1/2" Microbore Boring Bar - Shank dia. 1" x 5"

TSD DeVlieg 1/2" Microbore Boring Bar - Shank dia. 1" x 5"

  • West Warwick, Rhode Island, United States
  • Jan 30th
OD Cutting Tool Box tool fits Jarno or Reed #10 Taper 3 Tool Holder Stations

OD Cutting Tool Box tool fits Jarno or Reed #10 Taper 3 Tool Holder Stations

  • West Warwick, Rhode Island, United States
  • Jan 30th
Flynn 63 Offset Boring 2.75" Head / Shank 1.25" X 4"

Flynn 63 Offset Boring 2.75" Head / Shank 1.25" X 4"

  • West Warwick, Rhode Island, United States
  • Jan 30th
The Warner & Swasey Co. Turret Lathe Tool Holder M-1721-18

The Warner & Swasey Co. Turret Lathe Tool Holder M-1721-18

  • West Warwick, Rhode Island, United States
  • Jan 30th
OD Cutting Tool Box Tool fits Jarno or Reed No.10 #10 Taper

OD Cutting Tool Box Tool fits Jarno or Reed No.10 #10 Taper

  • West Warwick, Rhode Island, United States
  • Jan 30th
BRAND NEW KAISER TOOL 1/4" CARBIDE MINI BORING BAR WITH 10 TRIGON INSERTS

BRAND NEW KAISER TOOL 1/4" CARBIDE MINI BORING BAR WITH 10 TRIGON INSERTS

  • United States
  • Jan 30th
NKNOWN BRAND BORING BAR HOLDER 1 3/4 OD 7 1/2" LONG BB 2146 INSERT SP 422

NKNOWN BRAND BORING BAR HOLDER 1 3/4 OD 7 1/2" LONG BB 2146 INSERT SP 422

  • Loves Park, Illinois, United States
  • Jan 30th
EDW ANDREWS 45-04 BORING BAR HOLDER 1 3/4 OD 6" LONG 1/2 INCH TOOL BIT

EDW ANDREWS 45-04 BORING BAR HOLDER 1 3/4 OD 6" LONG 1/2 INCH TOOL BIT

  • Loves Park, Illinois, United States
  • Jan 30th
UNKNOWN BRAND BORING BAR HOLDER 1 3/4 OD 10 1/2" LONG BB 1142 INSERT TP 322

UNKNOWN BRAND BORING BAR HOLDER 1 3/4 OD 10 1/2" LONG BB 1142 INSERT TP 322

  • Loves Park, Illinois, United States
  • Jan 30th
Criterion Boring Head Set 1510-TX

Criterion Boring Head Set 1510-TX

  • Las Vegas, Nevada, United States
  • Jan 30th

People who viewed this item also vieved

Kennametal CV50MT2200 CAT 50 Tool Holder

Kennametal CV50MT2200 CAT 50 Tool Holder

  • Elk River, Minnesota, United States
  • May 30th
Command-Urma C6U4-0003 CAT 50 Tool Holder

Command-Urma C6U4-0003 CAT 50 Tool Holder

  • Elk River, Minnesota, United States
  • May 30th
Sandvik CBN Turning Insert TCGW221S0320F 7015

Sandvik CBN Turning Insert TCGW221S0320F 7015

  • Venice, Florida, United States
  • Jun 2nd
H B Rouse Boring Bar / Radius Cutter .99 Inch Cutting Diamter Across Inserts

H B Rouse Boring Bar / Radius Cutter .99 Inch Cutting Diamter Across Inserts

  • Palos Hills, Illinois, United States
  • Jun 2nd
Schmidt 14R Manual Toggle Press Frame

Schmidt 14R Manual Toggle Press Frame

  • El Paso, Texas, United States
  • Jun 2nd
Morse Taper #4 Straight Sleeve Drill Holder Adapter 1-3/4" OD 6" Long MT4 4MT

Morse Taper #4 Straight Sleeve Drill Holder Adapter 1-3/4" OD 6" Long MT4 4MT

  • Lorain, Ohio, United States
  • Jun 2nd
Woods SK 1 3/8 Split Taper Bushing (1.375)1-3/8"in Bore (.3125) 5/16"in Keyway

Woods SK 1 3/8 Split Taper Bushing (1.375)1-3/8"in Bore (.3125) 5/16"in Keyway

  • Francis Creek, Wisconsin, United States
  • Jun 3rd
Split Taper Bushing (.75)3/4"inch Bore (.1875)3/16"inch Keyway

Split Taper Bushing (.75)3/4"inch Bore (.1875)3/16"inch Keyway

  • Francis Creek, Wisconsin, United States
  • Jun 3rd
Big Kaiser/Stanley Sheppard BCV40-MEGA16N-6 BT40 Collet Chuck Big Daishcwa

Big Kaiser/Stanley Sheppard BCV40-MEGA16N-6 BT40 Collet Chuck Big Daishcwa

  • Garden City, Idaho, United States
  • Jun 5th
Command BT50 Quick Change Compresion/Tension Tap Chuck

Command BT50 Quick Change Compresion/Tension Tap Chuck

  • Johnson City, New York, United States
  • Jun 5th
Dorian Tool #50356 MDJNR20-5D Neg 55 deg Right Hand Diamond Toolholder

Dorian Tool #50356 MDJNR20-5D Neg 55 deg Right Hand Diamond Toolholder

  • Venice, Florida, United States
  • Jun 9th
NMTB 50 3/8" End Mill Tool Holder 2" Projection Bever EMH-13

NMTB 50 3/8" End Mill Tool Holder 2" Projection Bever EMH-13

  • Milton Freewater, Oregon, United States
  • Jun 9th
K4 CHUCK KEY FOR DRILL

K4 CHUCK KEY FOR DRILL

  • Gatlinburg, Tennessee, United States
  • Jun 10th
VTG NOS Snap-On 3 Jaw Geared Type Drill Chuck W/Key Original Box DCA 500

VTG NOS Snap-On 3 Jaw Geared Type Drill Chuck W/Key Original Box DCA 500

  • Northbrook, Illinois, United States
  • Jun 10th
Weldon QH-5 Quick Change Adaptor 3/4" End Mill

Weldon QH-5 Quick Change Adaptor 3/4" End Mill

  • Johnson City, New York, United States
  • Jun 13th
Weldon Quick Change Adaptor 1-1/2" End Mill

Weldon Quick Change Adaptor 1-1/2" End Mill

  • Johnson City, New York, United States
  • Jun 13th
Sunnen keyway honing unit y32-1.125 PB

Sunnen keyway honing unit y32-1.125 PB

  • Malone, Wisconsin, United States
  • Nov 1st
Sunnen keyway honing unit y-32 1.062 PB

Sunnen keyway honing unit y-32 1.062 PB

  • Malone, Wisconsin, United States
  • Nov 1st
2.2kw 3HP 24000rpm ER20 80mm spindle motor&2.2kw 3phase 220V VFD CNC kits

2.2kw 3HP 24000rpm ER20 80mm spindle motor&2.2kw 3phase 220V VFD CNC kits

  • DongGuan, China
  • Nov 7th
BT50-45° 45 degree outer screw 4 Petal Clamp Pull claw for cnc Spindle NEW

BT50-45° 45 degree outer screw 4 Petal Clamp Pull claw for cnc Spindle NEW

  • Shenzhen ,guangdong, China
  • Nov 8th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies