1-40kv 20-70khz 10-300w Adjustable Power Supply

US $509.95

Mont Vernon, New Hampshire, United States
Jun 9th

Open on mobile:
QR code

High Powered Plasma Driver is Intended to Tune Out Capacitance, Allowing High Power Operation of Gas Displays, Chemical, Ion, Plasma, Ozone Cells, Vessels and Other Research Functions. ADVANCED CIRCUITRY FOR TUNING CAPACITIVE LOADS, ALLOWING MAXIMUM POWER This reliable and flexible power supply effectively drives light capacitive loads. Output power may be adjusted from 10 to 300 watts. Operates from standard wall power (120 vac 60 hz) and measures 7 x 4 x 10" weighing less than 5 pounds. Intended for hydrogen production research, corona generation, energizing dielectric barrier junctions, ozone production and other electrochemical applications. High performance driver is well-suited for the plasma display manufacturer or experimental plasma scientist/engineer. Its multi-functionality also allows it to be used for the neon artist or experimenter with independent voltage, frequency and duty cycle control. The universal driver can be used for single-ended and proximity gas display tubes and vessels. May also be used to check for potential damaging resonances in large gas displays. Also will indicate the power required for a particular display. Excellent for powering ultra large neon, plasma globes and other displays, sputtering, plasma etching and treating, chemical vapor deposition (CVD) coating, and physical vapor deposition (PVD) coating, energizing dielectric barriers, electro-chemical reactions, and many other research functions. Intended for capacitive loads of 5 to 200 pfd (these can be ozone, chemical, and plasma cells, gas ionizing and igniting, etc.). PVM500 Instructions PVM500 Schematic PVM500 Duty Cycle Writeup Advanced Circuitry Features Independent voltage control from zero to maximum output of 40kv pk-pk Independent current control from 5% to maximum output Independent frequency control from 20 kHz to 70 kHz Large 3" ammeter monitors AC line current, indicates resonance peaking Tune out the capacitance that is often a problem found in plasma systems Adjustable wave form duty cycle function allowing a wide range of operation/display textures Maximum output power over 300 watts Short circuit proof by built-in leakage reactance 120vac 50/60 Hz input (240 vac wall power requires a step down transformer, below) Powers the smallest to the largest neon/plasma displays Measures 7" x 4" x 10" and weighs less than 5 pounds Please note that we can design a transformer to match your cell capacitance if it does not fall within our basic range. Contact us for your specific needs. Important: This model is an advanced system and can overpower your display or damage the output transformer. We do not offer refunds on this equipment, but can of course repair any problems that might occur. Please contact us if you have any questions. NOTE: the PVM500 and DIDRIV10 (elsewhere on this site) are basically the same but are used for different applications. Additional Transformer Secondaries We have roughly calculated transformer secondary turns at the frequencies of 20 to 65 kHz for those who need to go 1nf, 10nf, 100nf and >1µfd. These are the following optionally available coils covering all ranges. (The 2500 potted coil is supplied with all units.) COIL2500S turn epoxy potted coil (included on basic unit) tunes up to 25 pfd between 20 to 65 kHz COIL1000S turn epoxy potted coil optionally available tunes 2.7 to 138 pfd between 20 to 65 kHz COIL560 turns non potted hand wound coil tunes 100 to 1000 pfd between 20 to 65 kHz COIL200 turns non potted hand wound coil tunes .001 to .01 mfd between 20 to 65 kHz COIL50 turns non potted hand wound coil tunes .01 to .1 mfd between 20 to 65 kHz COIL15 turns non potted hand wound coil tunes .1 to >1 mfd between 20 to 65 kHz Hand wound coils are easily pruned by removing or adding turns. TR220/110/300 - Optional step-down transformer for international customers operating at 220VAC wall power

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Information Unlimited
MPN	Does Not Apply